Adafruit

{"id":8608172680,"title":"Adafruit Trinket - Mini Microcontroller - 5V Logic - MicroUSB","handle":"adafruit-trinket-mini-microcontroller-5v-logic-microusb","description":"\u003cp\u003eTrinket is a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost arduino-IDE programmable board.\u003cbr\u003e\u003cbr\u003eThe Attiny85 is a fun processor because despite being so small, it has 8K of flash, and 5 I\/O pins, including analog inputs and PWM 'analog' outputs. This trinket was designed with a USB bootloader so you can plug it into any computer and reprogram it over a USB port just like an Arduino. In fact Adafruit even made simple modifications to the Arduino IDE so that it works like a mini-Arduino board. You can't stack a big shield on it but for many small \u0026amp; simple projects the Trinket will be your go-to platform.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/adafruit-trinket-mini-microcontroller-3-3v-logic-microusb\" target=\"_blank\"\u003eYou can find the 3.3V trinket here\u003c\/a\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/57w7e6_3MPg\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003eEven though you can program Trinket using the Arduino IDE, it's not a fully 100% Arduino-compatible. There are some things you trade off for such a small and low cost microcontroller!\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e• Trinket does not have a Serial port connection for debugging so the serial port monitor will not be able to send\/receive data\u003c\/li\u003e\n\u003cli\u003e• Some computers' USB v3 ports don't recognize the Trinket's bootloader. Simply use a USB v2 port or a USB hub in between\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:47-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Microcontroller","Trinkets"],"price":690,"price_min":690,"price_max":690,"available":true,"price_varies":false,"compare_at_price":695,"compare_at_price_min":695,"compare_at_price_max":695,"compare_at_price_varies":false,"variants":[{"id":29778535368,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XOX-IGE-WMA","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Trinket - Mini Microcontroller - 5V Logic - MicroUSB","public_title":null,"options":["Default Title"],"price":690,"weight":0,"compare_at_price":695,"inventory_quantity":127,"inventory_management":"shopify","inventory_policy":"deny","barcode":"1501"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1501-12.jpg?v=1487623093","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1501-06.jpg?v=1487623095","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1501-07.jpg?v=1487623096","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1501-08.jpg?v=1487623099","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1501-10.jpg?v=1487623100","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1501-09.jpg?v=1487623102"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1501-12.jpg?v=1487623093","options":["Title"],"content":"\u003cp\u003eTrinket is a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost arduino-IDE programmable board.\u003cbr\u003e\u003cbr\u003eThe Attiny85 is a fun processor because despite being so small, it has 8K of flash, and 5 I\/O pins, including analog inputs and PWM 'analog' outputs. This trinket was designed with a USB bootloader so you can plug it into any computer and reprogram it over a USB port just like an Arduino. In fact Adafruit even made simple modifications to the Arduino IDE so that it works like a mini-Arduino board. You can't stack a big shield on it but for many small \u0026amp; simple projects the Trinket will be your go-to platform.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/adafruit-trinket-mini-microcontroller-3-3v-logic-microusb\" target=\"_blank\"\u003eYou can find the 3.3V trinket here\u003c\/a\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/57w7e6_3MPg\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cbr\u003e\u003cbr\u003eEven though you can program Trinket using the Arduino IDE, it's not a fully 100% Arduino-compatible. There are some things you trade off for such a small and low cost microcontroller!\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e• Trinket does not have a Serial port connection for debugging so the serial port monitor will not be able to send\/receive data\u003c\/li\u003e\n\u003cli\u003e• Some computers' USB v3 ports don't recognize the Trinket's bootloader. Simply use a USB v2 port or a USB hub in between\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":8608172424,"title":"Adafruit Feather HUZZAH with ESP8266 WiFi","handle":"adafruit-feather-huzzah-with-esp8266-wifi","description":"\u003cp\u003eFeather is the new development board from Adafruit. It is thin, light, and has been designed to be a new standard for portable microcontroller cores.\u003c\/p\u003e\n\u003cp\u003eThis is an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging. Its an  ESP8266 WiFi module with all the extras you need.\u003c\/p\u003e\n\u003cp\u003eAt the core is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE. As well, it includes a high-quality SiLabs CP2104 USB-Serial chip that can upload code at  921600 baud for fast development time. It also has auto-reset. \u003c\/p\u003e\n\u003cp\u003eTo make it easy to use for portable projects, we added a connector for any type of 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available.\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/kpEON8j2rEI\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:46-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Feather","Microcontroller"],"price":1590,"price_min":1590,"price_max":1590,"available":false,"price_varies":false,"compare_at_price":1595,"compare_at_price_min":1595,"compare_at_price_max":1595,"compare_at_price_varies":false,"variants":[{"id":29778535112,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"7B8-JFU-XCN","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Adafruit Feather HUZZAH with ESP8266 WiFi","public_title":null,"options":["Default Title"],"price":1590,"weight":0,"compare_at_price":1595,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"2821"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2821-01.jpg?v=1486061661","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2821-03.jpg?v=1486061663","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2821-02.jpg?v=1486061665","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2821-06.jpg?v=1486061666","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2821-05.jpg?v=1486061667","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2821-04.jpg?v=1486061669"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2821-01.jpg?v=1486061661","options":["Title"],"content":"\u003cp\u003eFeather is the new development board from Adafruit. It is thin, light, and has been designed to be a new standard for portable microcontroller cores.\u003c\/p\u003e\n\u003cp\u003eThis is an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging. Its an  ESP8266 WiFi module with all the extras you need.\u003c\/p\u003e\n\u003cp\u003eAt the core is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE. As well, it includes a high-quality SiLabs CP2104 USB-Serial chip that can upload code at  921600 baud for fast development time. It also has auto-reset. \u003c\/p\u003e\n\u003cp\u003eTo make it easy to use for portable projects, we added a connector for any type of 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available.\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/kpEON8j2rEI\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8608172360,"title":"Adafruit Feather 32u4 Bluefruit LE","handle":"adafruit-feather-32u4-bluefruit-le","description":"\u003cp\u003eFeather is the new development board from Adafruit. It is thin and light and was designed to be a new standard for portable microcontroller cores.\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ItV08vGqACM\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBluetooth Low Energy is the new low-power, 2.4GHz spectrum wireless protocol. In particular, its the only wireless protocol that you can use with iOS without needing special certification and it's supported by all modern smart phones. This makes it excellent for use in portable projects that will make use of an iOS or Android phone or tablet. It also is supported in Mac OS X and Windows 8+.\u003c\/p\u003e\n\u003cp\u003eAt the Feather 32u4's heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program \u0026amp; debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc.\u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:46-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Bluetooth","Feather","Microcontroller"],"price":2990,"price_min":2990,"price_max":2990,"available":true,"price_varies":false,"compare_at_price":2995,"compare_at_price_min":2995,"compare_at_price_max":2995,"compare_at_price_varies":false,"variants":[{"id":29778535048,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NO5-OQT-K92","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Feather 32u4 Bluefruit LE","public_title":null,"options":["Default Title"],"price":2990,"weight":0,"compare_at_price":2995,"inventory_quantity":78,"inventory_management":"shopify","inventory_policy":"deny","barcode":"2829"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2829-01.jpg?v=1486673148","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2829-09.jpg?v=1486673148","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2829-03.jpg?v=1486673148","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2829-08.jpg?v=1486673148","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2829-06.jpg?v=1486673148","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2829-05.jpg?v=1486673148","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2829-04.jpg?v=1486673148"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2829-01.jpg?v=1486673148","options":["Title"],"content":"\u003cp\u003eFeather is the new development board from Adafruit. It is thin and light and was designed to be a new standard for portable microcontroller cores.\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/ItV08vGqACM\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBluetooth Low Energy is the new low-power, 2.4GHz spectrum wireless protocol. In particular, its the only wireless protocol that you can use with iOS without needing special certification and it's supported by all modern smart phones. This makes it excellent for use in portable projects that will make use of an iOS or Android phone or tablet. It also is supported in Mac OS X and Windows 8+.\u003c\/p\u003e\n\u003cp\u003eAt the Feather 32u4's heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program \u0026amp; debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc.\u003c\/p\u003e"}

{"id":8608172040,"title":"Adafruit MCP3008 - 8-Channel 10-Bit ADC With SPI Interface","handle":"mcp3008-8-channel-10-bit-adc-with-spi-interface","description":"\u003cp\u003e\u003cspan\u003eNeed to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy to use, and uses SPI so only 4 pins are required. We chose this chip as a great accompaniment to the Raspberry Pi computer, because its fun to have analog inputs but the Pi does not have an ADC.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:45-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Components and Parts","Microcontroller"],"price":370,"price_min":370,"price_max":370,"available":true,"price_varies":false,"compare_at_price":375,"compare_at_price_min":375,"compare_at_price_max":375,"compare_at_price_varies":false,"variants":[{"id":29778534728,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"I5R-BNL-0RZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit MCP3008 - 8-Channel 10-Bit ADC With SPI Interface","public_title":null,"options":["Default Title"],"price":370,"weight":0,"compare_at_price":375,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":"856"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/856-01.jpg?v=1486785147","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/856-02.jpg?v=1486785148"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/856-01.jpg?v=1486785147","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eNeed to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy to use, and uses SPI so only 4 pins are required. We chose this chip as a great accompaniment to the Raspberry Pi computer, because its fun to have analog inputs but the Pi does not have an ADC.\u003c\/span\u003e\u003c\/p\u003e"}

{"id":8608171848,"title":"Adafruit Trinket - Mini Microcontroller - 3.3V Logic - MicroUSB","handle":"adafruit-trinket-mini-microcontroller-3-3v-logic-microusb","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis Trinket is a tiny microcontroller board, built around the Atmel ATtiny85, \u003cspan\u003ea little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost arduino-IDE programmable board.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThe Attiny85 is a fun processor because despite being so small, it has 8K of flash, and 5 I\/O pins, including analog inputs and PWM 'analog' outputs. We designed a USB bootloader so you can plug it into any computer and reprogram it over a USB port just like an Arduino. In fact we even made some simple modifications to the Arduino IDE so that it works like a mini-Arduino board. You can't stack a big shield on it but for many small \u0026amp; simple projects the Trinket will be your go-to platform.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/adafruit-trinket-mini-microcontroller-5v-logic-microusb\" target=\"_blank\"\u003eYou can find the 5V Trinket here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/57w7e6_3MPg\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eEven though you can program Trinket using the Arduino IDE, it's not a fully 100% Arduino-compatible. There are some things you trade off for such a small and low cost microcontroller.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e• Trinket does not have a Serial port connection for debugging so the serial port monitor will not be able to send\/receive data\u003c\/li\u003e\n\u003cli\u003e• Some computers' USB v3 ports don't recognize the Trinket's bootloader. Simply use a USB v2 port or a USB hub in between.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:45-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Microcontroller","Trinkets"],"price":690,"price_min":690,"price_max":690,"available":true,"price_varies":false,"compare_at_price":695,"compare_at_price_min":695,"compare_at_price_max":695,"compare_at_price_varies":false,"variants":[{"id":29778534536,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"YFV-BM8-VTM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Trinket - Mini Microcontroller - 3.3V Logic - MicroUSB","public_title":null,"options":["Default Title"],"price":690,"weight":0,"compare_at_price":695,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":"1500"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1500-06.jpg?v=1486697450","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1500-07.jpg?v=1486697452","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1500-12.jpg?v=1486697453","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1500-08_ffe87d96-2bbe-4c12-a0b1-fd733b812e88.jpg?v=1486697455","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1500-10.jpg?v=1486697457","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1500-09.jpg?v=1486697458"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1500-06.jpg?v=1486697450","options":["Title"],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis Trinket is a tiny microcontroller board, built around the Atmel ATtiny85, \u003cspan\u003ea little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost arduino-IDE programmable board.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThe Attiny85 is a fun processor because despite being so small, it has 8K of flash, and 5 I\/O pins, including analog inputs and PWM 'analog' outputs. We designed a USB bootloader so you can plug it into any computer and reprogram it over a USB port just like an Arduino. In fact we even made some simple modifications to the Arduino IDE so that it works like a mini-Arduino board. You can't stack a big shield on it but for many small \u0026amp; simple projects the Trinket will be your go-to platform.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/adafruit-trinket-mini-microcontroller-5v-logic-microusb\" target=\"_blank\"\u003eYou can find the 5V Trinket here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/57w7e6_3MPg\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eEven though you can program Trinket using the Arduino IDE, it's not a fully 100% Arduino-compatible. There are some things you trade off for such a small and low cost microcontroller.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e• Trinket does not have a Serial port connection for debugging so the serial port monitor will not be able to send\/receive data\u003c\/li\u003e\n\u003cli\u003e• Some computers' USB v3 ports don't recognize the Trinket's bootloader. Simply use a USB v2 port or a USB hub in between.\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":8608171720,"title":"Adafruit GEMMA v2 - Miniature Wearable Electronic Platform","handle":"adafruit-gemma-v2-miniature-wearable-electronic-platform","description":"\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/t0yEjVjvXxE\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eLove the \u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/adafruit-flora-wearable-electronic-platform-arduino-compatible-v2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ewearable electronic platform - FLORA\u003c\/a\u003e but want a smaller version? Look no further, GEMMA is a tiny wearable platform board in a 1\" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project.\u003cbr\u003e\u003cbr\u003eThis microcontroller board is small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your \u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/adafruit-flora-wearable-electronic-platform-arduino-compatible-v2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFLORA \u003c\/a\u003eand you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost sewable controller.\u003cbr\u003e\u003cbr\u003eEven though you can program GEMMA using the Arduino IDE, it's not a fully 100% Arduino-compatible. There are some things you trade off for such a small and low cost microcontroller.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGEMMA does not have a Serial port connection for debugging so the serial port monitor will not be able to send\/receive data\u003c\/li\u003e\n\u003cli\u003eSome computers' USB v3 ports don't recognize the GEMMAs bootloader. Simply use a USB v2 port or a USB hub in between\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:45-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Microcontroller","NeoPixels","Wearable"],"price":990,"price_min":990,"price_max":990,"available":true,"price_varies":false,"compare_at_price":995,"compare_at_price_min":995,"compare_at_price_max":995,"compare_at_price_varies":false,"variants":[{"id":29778534408,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"G2J-OL8-T4P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit GEMMA v2 - Miniature Wearable Electronic Platform","public_title":null,"options":["Default Title"],"price":990,"weight":0,"compare_at_price":995,"inventory_quantity":32,"inventory_management":"shopify","inventory_policy":"deny","barcode":"1222"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1222-04.jpg?v=1486065034","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1222-00.jpg?v=1486065036","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1222-01.jpg?v=1486065037","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1222-03.jpg?v=1486065038"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1222-04.jpg?v=1486065034","options":["Title"],"content":"\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/t0yEjVjvXxE\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eLove the \u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/adafruit-flora-wearable-electronic-platform-arduino-compatible-v2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ewearable electronic platform - FLORA\u003c\/a\u003e but want a smaller version? Look no further, GEMMA is a tiny wearable platform board in a 1\" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project.\u003cbr\u003e\u003cbr\u003eThis microcontroller board is small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your \u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/adafruit-flora-wearable-electronic-platform-arduino-compatible-v2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFLORA \u003c\/a\u003eand you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost sewable controller.\u003cbr\u003e\u003cbr\u003eEven though you can program GEMMA using the Arduino IDE, it's not a fully 100% Arduino-compatible. There are some things you trade off for such a small and low cost microcontroller.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGEMMA does not have a Serial port connection for debugging so the serial port monitor will not be able to send\/receive data\u003c\/li\u003e\n\u003cli\u003eSome computers' USB v3 ports don't recognize the GEMMAs bootloader. Simply use a USB v2 port or a USB hub in between\u003c\/li\u003e\n\u003c\/ul\u003e"}

{"id":8608169608,"title":"Adafruit FLORA - Wearable Electronic Platform: Arduino-Compatible - v3","handle":"adafruit-flora-wearable-electronic-platform-arduino-compatible-v3","description":"\u003cp\u003eFLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects. It is the larger predecessor of the \u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/adafruit-gemma-v2-miniature-wearable-electronic-platform\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGEMMA, found here\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eThe FLORA has built-in USB support. Built in USB means you plug it in to program it, it just shows up - all you need is a Micro-B USB cable. The FLORA has USB HID support, so it can act like a mouse or keyboard to attach directly to computers.\u003cbr\u003e\u003cbr\u003eFLORA has a small but easy to use onboard reset button to reboot the system. The power supply is designed to be flexible and easy to use. There is an onboard polarized 2 JST battery connector with protection schottky diode for use with external battery packs from 3.5v to 16v DC in. Can be used with LiIon\/LiPoly, LiFe, alkaline or rechargeable NiMh\/NiCad batteries of any size. \u003cstrong\u003eThe FLORA does not have a LiPo charger included\u003c\/strong\u003e, this allows safe use with multiple battery types and reduces risk of fire as it is not recommended to charge these batteries on fabric.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan\u003eUnsure whether you should use the GEMMA or the FLORA for your next wearable project? Watch this video to help make the decision:\u003c\/span\u003e\u003c\/div\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/bGVBR4BwIPs\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:40-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Microcontroller","NeoPixels","Wearable"],"price":1490,"price_min":1490,"price_max":1490,"available":true,"price_varies":false,"compare_at_price":1495,"compare_at_price_min":1495,"compare_at_price_max":1495,"compare_at_price_varies":false,"variants":[{"id":29778530632,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"9N-CLIA-VUGO","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit FLORA - Wearable Electronic Platform: Arduino-Compatible - v3","public_title":null,"options":["Default Title"],"price":1490,"weight":0,"compare_at_price":1495,"inventory_quantity":53,"inventory_management":"shopify","inventory_policy":"deny","barcode":"659"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/659-07.jpg?v=1486672850","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/659-01.jpg?v=1486672850","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/659-09.jpg?v=1486672850","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/659-05.jpg?v=1486672850","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/659-04.jpg?v=1486672850","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/659-10.jpg?v=1486672850"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/659-07.jpg?v=1486672850","options":["Title"],"content":"\u003cp\u003eFLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects. It is the larger predecessor of the \u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/adafruit-gemma-v2-miniature-wearable-electronic-platform\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGEMMA, found here\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eThe FLORA has built-in USB support. Built in USB means you plug it in to program it, it just shows up - all you need is a Micro-B USB cable. The FLORA has USB HID support, so it can act like a mouse or keyboard to attach directly to computers.\u003cbr\u003e\u003cbr\u003eFLORA has a small but easy to use onboard reset button to reboot the system. The power supply is designed to be flexible and easy to use. There is an onboard polarized 2 JST battery connector with protection schottky diode for use with external battery packs from 3.5v to 16v DC in. Can be used with LiIon\/LiPoly, LiFe, alkaline or rechargeable NiMh\/NiCad batteries of any size. \u003cstrong\u003eThe FLORA does not have a LiPo charger included\u003c\/strong\u003e, this allows safe use with multiple battery types and reduces risk of fire as it is not recommended to charge these batteries on fabric.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003cspan\u003eUnsure whether you should use the GEMMA or the FLORA for your next wearable project? Watch this video to help make the decision:\u003c\/span\u003e\u003c\/div\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/bGVBR4BwIPs\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e"}

{"id":8861032200,"title":"Adafruit HUZZAH ESP8266 Breakout","handle":"adafruit-huzzah-esp8266-breakout","description":"\u003cp\u003eAdd Internet to your next project with this compact WiFi microcontroller. The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP\/IP stack with DNS support as well. \u003c\/p\u003e\n\u003cp\u003eThe Adafruit HUZZAH ESP8266 breakout has been designed to make working with this chip super easy and a lot of fun. Adafruit has taken a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs.\u003c\/p\u003e\n\u003cp\u003eEach order comes with one assembled and tested HUZZAH ESP8266 breakout board, and a stick of 0.1\" header that you can solder on and plug the breakout into a breadboard. A soldering iron and solder are required for that, and aren't included. Solderless breadboard also not included. \u003cstrong\u003eYou'll really want a USB-serial cable\u003c\/strong\u003e such as a \u003ca href=\"https:\/\/kjdelectronics.com\/products\/adafruit-ftdi-friend-extras-v1-0\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e FTDI Friend (great for any OS)\u003c\/a\u003e, or \u003ca href=\"https:\/\/kjdelectronics.com\/products\/adafruit-ftdi-ttl-232-usb-cable\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFTDI cable (great for any OS)\u003c\/a\u003e. For more advanced users, we recommend the \u003ca href=\"https:\/\/kjdelectronics.com\/products\/adafruit-feather-huzzah-with-esp8266-wifi\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit Feather HUZZAH\u003c\/a\u003e for your microcontroller needs.\u003c\/p\u003e","published_at":"2017-03-07T22:16:00-05:00","created_at":"2017-03-06T21:01:32-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Microcontroller"],"price":990,"price_min":990,"price_max":990,"available":false,"price_varies":false,"compare_at_price":995,"compare_at_price_min":995,"compare_at_price_max":995,"compare_at_price_varies":false,"variants":[{"id":31547912968,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"UM1-MAO-H2N","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Adafruit HUZZAH ESP8266 Breakout","public_title":null,"options":["Default Title"],"price":990,"weight":0,"compare_at_price":995,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"2471"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2471-10.jpg?v=1488941732","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2471-12.jpg?v=1488941736","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2471-11.jpg?v=1488941738","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2471-15.jpg?v=1488941740","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2471-05.jpg?v=1488941743"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2471-10.jpg?v=1488941732","options":["Title"],"content":"\u003cp\u003eAdd Internet to your next project with this compact WiFi microcontroller. The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP\/IP stack with DNS support as well. \u003c\/p\u003e\n\u003cp\u003eThe Adafruit HUZZAH ESP8266 breakout has been designed to make working with this chip super easy and a lot of fun. Adafruit has taken a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs.\u003c\/p\u003e\n\u003cp\u003eEach order comes with one assembled and tested HUZZAH ESP8266 breakout board, and a stick of 0.1\" header that you can solder on and plug the breakout into a breadboard. A soldering iron and solder are required for that, and aren't included. Solderless breadboard also not included. \u003cstrong\u003eYou'll really want a USB-serial cable\u003c\/strong\u003e such as a \u003ca href=\"https:\/\/kjdelectronics.com\/products\/adafruit-ftdi-friend-extras-v1-0\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e FTDI Friend (great for any OS)\u003c\/a\u003e, or \u003ca href=\"https:\/\/kjdelectronics.com\/products\/adafruit-ftdi-ttl-232-usb-cable\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFTDI cable (great for any OS)\u003c\/a\u003e. For more advanced users, we recommend the \u003ca href=\"https:\/\/kjdelectronics.com\/products\/adafruit-feather-huzzah-with-esp8266-wifi\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit Feather HUZZAH\u003c\/a\u003e for your microcontroller needs.\u003c\/p\u003e"}

{"id":10243529800,"title":"Adafruit FLORA GPS Starter Pack","handle":"adafruit-flora-gps-starter-pack","description":"\u003cp\u003eGet started with the Adafruit Flora platform with this lovely starter kit. Included are plenty of parts to make a few different fun projects! There's a Flora motherboard, a GPS module that can also perform location datalogging, eight ultra-bright chainable RGB pixels, a battery holder and batteries, two types of our high quality stainless steel thread, alligator clips to help you test out your parts, a USB cable for reprogramming the Flora, and some parts to make a wearable remote control (or \u003ca href=\"https:\/\/kjdelectronics.com\/products\/tv-b-gone-kit?variant=29778526728\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTV-B-Gone\u003c\/a\u003e): NPN transistors, long range IR LEDs, and matching resistors. \u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/kiBbRU5rwQc\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","published_at":"2017-07-21T11:51:23-04:00","created_at":"2017-07-21T12:00:04-04:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Kit","Microcontroller","NeoPixels","Wearable"],"price":8990,"price_min":8990,"price_max":8990,"available":false,"price_varies":false,"compare_at_price":8995,"compare_at_price_min":8995,"compare_at_price_max":8995,"compare_at_price_varies":false,"variants":[{"id":41320084680,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"I35-LMM-Y8L","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Adafruit FLORA GPS Starter Pack","public_title":null,"options":["Default Title"],"price":8990,"weight":0,"compare_at_price":8995,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"1090"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1090-01.jpg?v=1500653013","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/659-01_452794c0-403d-421f-a1ff-62afc459c22e.jpg?v=1500653020","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/659-02.jpg?v=1500653023","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/659-10_79fb5948-a56d-4679-8176-3b0a72ea0830.jpg?v=1500653025"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1090-01.jpg?v=1500653013","options":["Title"],"content":"\u003cp\u003eGet started with the Adafruit Flora platform with this lovely starter kit. Included are plenty of parts to make a few different fun projects! There's a Flora motherboard, a GPS module that can also perform location datalogging, eight ultra-bright chainable RGB pixels, a battery holder and batteries, two types of our high quality stainless steel thread, alligator clips to help you test out your parts, a USB cable for reprogramming the Flora, and some parts to make a wearable remote control (or \u003ca href=\"https:\/\/kjdelectronics.com\/products\/tv-b-gone-kit?variant=29778526728\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTV-B-Gone\u003c\/a\u003e): NPN transistors, long range IR LEDs, and matching resistors. \u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/kiBbRU5rwQc\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e"}