SparkFun

{"id":4330418372726,"title":"SparkFun Inventor's Kit V4.1","handle":"sparkfun-inventors-kit-v4-1","description":"\u003cp\u003eThe SparkFun Inventor's Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete five overarching projects consisting of 16 interconnected circuits that teach everything from blinking an LED to reading sensors. The culminating project is your very own autonomous robot! No previous programming or electronics experience is required to use this kit.\u003c\/p\u003e\u003cp\u003eThe full-color, spiral-bound SIK guidebook (included) contains step-by-step instructions with circuit diagrams and hookup tables for building each project and circuit with the included parts. Full example code is provided, new concepts and components are explained at point of use, and troubleshooting tips offer assistance if something goes wrong.\u003c\/p\u003e\u003cp\u003eThe kit does not require any soldering and is recommended for beginners ages 10 and up who are looking for an Arduino starter kit. For SIK version 4.1 we took an entirely different approach to teaching embedded electronics. In previous versions of the SIK, each circuit focused on introducing a new piece of technology. With SIK v4.1, components are introduced in the context of the circuit you are building, and each circuit builds upon the last, leading up to a project that incorporates all of the components and concepts introduced throughout the guide. With new parts and a completely new strategy, even if you've used the SIK before, you're in for a brand-new experience!\u003c\/p\u003e\u003cp\u003eThe SIK V4.1 includes the Redboard Qwiic which allows you to expand into the SparkFun Qwiic ecosystem after you have become proficient with the SIK circuits. The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong. With the addition of the SparkFun RedBoard Qwiic, you \u003cem\u003ewill need\u003c\/em\u003e to download a \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-serial-basic-ch340c-hookup-guide#drivers-if-you-need-them\" target=\"_blank\"\u003enew driver install\u003c\/a\u003e that is different from the original SparkFun RedBoard.\u003c\/p\u003e","published_at":"2019-10-31T10:51:29-04:00","created_at":"2019-10-31T09:43:19-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":8989,"price_min":8989,"price_max":8989,"available":true,"price_varies":false,"compare_at_price":9995,"compare_at_price_min":9995,"compare_at_price_max":9995,"compare_at_price_varies":false,"variants":[{"id":31071697535094,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K565","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun Inventor's Kit V4.1","public_title":null,"options":["Default Title"],"price":8989,"weight":1361,"compare_at_price":9995,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"continue","barcode":"845156009664","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15267-SparkFun_Inventor_s_Kit_-_v4.1-01a_1.jpg?v=1574517986","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15267-SparkFun_Inventor_s_Kit_-_v4.1-02.jpg?v=1574517986","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15478-SparkFun_Inventor_s_Kit_Guidebook_-_v4.1-02.jpg?v=1574517986"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15267-SparkFun_Inventor_s_Kit_-_v4.1-01a_1.jpg?v=1574517986","options":["Title"],"media":[{"alt":null,"id":5676225396854,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15267-SparkFun_Inventor_s_Kit_-_v4.1-01a_1.jpg?v=1574517983"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15267-SparkFun_Inventor_s_Kit_-_v4.1-01a_1.jpg?v=1574517983","width":600},{"alt":null,"id":5516061606006,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15267-SparkFun_Inventor_s_Kit_-_v4.1-02.jpg?v=1572529399"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15267-SparkFun_Inventor_s_Kit_-_v4.1-02.jpg?v=1572529399","width":600},{"alt":null,"id":5516446662774,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15478-SparkFun_Inventor_s_Kit_Guidebook_-_v4.1-02.jpg?v=1572533642"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15478-SparkFun_Inventor_s_Kit_Guidebook_-_v4.1-02.jpg?v=1572533642","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe SparkFun Inventor's Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete five overarching projects consisting of 16 interconnected circuits that teach everything from blinking an LED to reading sensors. The culminating project is your very own autonomous robot! No previous programming or electronics experience is required to use this kit.\u003c\/p\u003e\u003cp\u003eThe full-color, spiral-bound SIK guidebook (included) contains step-by-step instructions with circuit diagrams and hookup tables for building each project and circuit with the included parts. Full example code is provided, new concepts and components are explained at point of use, and troubleshooting tips offer assistance if something goes wrong.\u003c\/p\u003e\u003cp\u003eThe kit does not require any soldering and is recommended for beginners ages 10 and up who are looking for an Arduino starter kit. For SIK version 4.1 we took an entirely different approach to teaching embedded electronics. In previous versions of the SIK, each circuit focused on introducing a new piece of technology. With SIK v4.1, components are introduced in the context of the circuit you are building, and each circuit builds upon the last, leading up to a project that incorporates all of the components and concepts introduced throughout the guide. With new parts and a completely new strategy, even if you've used the SIK before, you're in for a brand-new experience!\u003c\/p\u003e\u003cp\u003eThe SIK V4.1 includes the Redboard Qwiic which allows you to expand into the SparkFun Qwiic ecosystem after you have become proficient with the SIK circuits. The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong. With the addition of the SparkFun RedBoard Qwiic, you \u003cem\u003ewill need\u003c\/em\u003e to download a \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-serial-basic-ch340c-hookup-guide#drivers-if-you-need-them\" target=\"_blank\"\u003enew driver install\u003c\/a\u003e that is different from the original SparkFun RedBoard.\u003c\/p\u003e"}

{"id":4330419093622,"title":"Sparkfun 500 1\/4W Resistor Kit","handle":"sparkfun-500-1-4w-resistor-kit","description":"\u003cp\u003eResistors are a good thing, in fact, they're actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you're gonna have the resistor you need when you need it is to stock up, and keep them organized. We have just the thing!\u003c\/p\u003e\u003cp\u003eOur new branded resistor kit comes with 25 each of 20 different resistor values (including \u003ca href=\"http:\/\/en.wikipedia.org\/wiki\/Zero-ohm_link\" target=\"_blank\"\u003e0Ω links\u003c\/a\u003e!). All of these resistors are stapled into a tri-fold pack and clearly labeled. The back of the resistor kit even has a resistor color code look-up chart and a table of color codes for the included resistors!\u003c\/p\u003e\u003cp\u003eWe'd like to give Oomlout credit for coming up with this great idea. Thanks guys!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eValues Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0Ω, 1.5Ω, 4.7Ω, 10Ω, 47Ω\u003c\/li\u003e\n\u003cli\u003e100Ω, 220Ω, 330Ω, 470Ω, 680Ω\u003c\/li\u003e\n\u003cli\u003e1kΩ, 2.2kΩ, 3.3kΩ, 4.7kΩ, 10kΩ\u003c\/li\u003e\n\u003cli\u003e22kΩ, 47kΩ, 100kΩ, 330kΩ, 1MΩ\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2019-10-31T11:18:03-04:00","created_at":"2019-10-31T09:43:38-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":745,"price_min":745,"price_max":745,"available":true,"price_varies":false,"compare_at_price":795,"compare_at_price_min":795,"compare_at_price_max":795,"compare_at_price_varies":false,"variants":[{"id":31071698387062,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K571","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sparkfun 500 1\/4W Resistor Kit","public_title":null,"options":["Default Title"],"price":745,"weight":113,"compare_at_price":795,"inventory_quantity":26,"inventory_management":"shopify","inventory_policy":"deny","barcode":"845156001118","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/10969-01.jpg?v=1572529418","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/10969-04.jpg?v=1572535098"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/10969-01.jpg?v=1572529418","options":["Title"],"media":[{"alt":null,"id":5516063703158,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/10969-01.jpg?v=1572529418"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/10969-01.jpg?v=1572529418","width":600},{"alt":null,"id":5516582060150,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/10969-04.jpg?v=1572535098"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/10969-04.jpg?v=1572535098","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eResistors are a good thing, in fact, they're actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you're gonna have the resistor you need when you need it is to stock up, and keep them organized. We have just the thing!\u003c\/p\u003e\u003cp\u003eOur new branded resistor kit comes with 25 each of 20 different resistor values (including \u003ca href=\"http:\/\/en.wikipedia.org\/wiki\/Zero-ohm_link\" target=\"_blank\"\u003e0Ω links\u003c\/a\u003e!). All of these resistors are stapled into a tri-fold pack and clearly labeled. The back of the resistor kit even has a resistor color code look-up chart and a table of color codes for the included resistors!\u003c\/p\u003e\u003cp\u003eWe'd like to give Oomlout credit for coming up with this great idea. Thanks guys!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eValues Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0Ω, 1.5Ω, 4.7Ω, 10Ω, 47Ω\u003c\/li\u003e\n\u003cli\u003e100Ω, 220Ω, 330Ω, 470Ω, 680Ω\u003c\/li\u003e\n\u003cli\u003e1kΩ, 2.2kΩ, 3.3kΩ, 4.7kΩ, 10kΩ\u003c\/li\u003e\n\u003cli\u003e22kΩ, 47kΩ, 100kΩ, 330kΩ, 1MΩ\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e"}

{"id":4447169806454,"title":"Raspberry Pi 4 Model B\/2GB","handle":"raspberry-pi-4-model-b-2gb","description":"\u003cp\u003eThe Raspberry Pi 4 Model B is the latest product in the Raspberry Pi range, boasting a 64-bit quad core processor running at 1.5GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 5.0\/BLE, true Gigabit Ethernet, and PoE capability via a separate PoE HAT.\u003c\/p\u003e\u003cp\u003eThe dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.\u003c\/p\u003e","published_at":"2020-04-02T10:02:27-04:00","created_at":"2020-04-02T10:02:17-04:00","vendor":"SparkFun","type":"SparkFun","tags":["Pi4","Raspberry Pi"],"price":4195,"price_min":4195,"price_max":4195,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31519865634934,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K678","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Raspberry Pi 4 Model B\/2GB","public_title":null,"options":["Default Title"],"price":4195,"weight":0,"compare_at_price":null,"inventory_quantity":38,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2GB-9003__22392.1560436211__50222.1561146603.jpg?v=1585836137"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2GB-9003__22392.1560436211__50222.1561146603.jpg?v=1585836137","options":["Title"],"media":[{"alt":null,"id":6301181706358,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2GB-9003__22392.1560436211__50222.1561146603.jpg?v=1585836137"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2GB-9003__22392.1560436211__50222.1561146603.jpg?v=1585836137","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Raspberry Pi 4 Model B is the latest product in the Raspberry Pi range, boasting a 64-bit quad core processor running at 1.5GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 5.0\/BLE, true Gigabit Ethernet, and PoE capability via a separate PoE HAT.\u003c\/p\u003e\u003cp\u003eThe dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.\u003c\/p\u003e"}

{"id":4636613902454,"title":"Raspberry Pi Pico","handle":"raspberry-pi-pico","description":"\u003cp\u003eThe Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It feature the RP2040 which marks Raspberry Pi's first microcontroller designed in-house. Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and decoupling and USB connector). The majority of the RP2040 microcontroller pins are brought to the user IO pins on the left and right edge of the board. Four RP2040 IO are used for internal functions - driving an LED, on-board Switched Mode Power Supply (SMPS) power control and sensing the system voltages.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom\u003c\/li\u003e\n\u003cli\u003eDual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz\u003c\/li\u003e\n\u003cli\u003e264kB of SRAM, and 2MB of on-board Flash memory\u003c\/li\u003e\n\u003cli\u003eCastellated module allows soldering direct to carrier boards\u003c\/li\u003e\n\u003cli\u003eLow-power sleep and dormant modes\u003c\/li\u003e\n\u003cli\u003eDrag \u0026amp; drop programming using mass storage over USB\u003c\/li\u003e\n\u003cli\u003e26 multi-function GPIO pins\u003c\/li\u003e\n\u003cli\u003e2× SPI, 2× I2C, 2× UART, 3× 12-bit ADC, 16× controllable PWM channels\u003c\/li\u003e\n\u003cli\u003eTemperature sensor\u003c\/li\u003e\n\u003cli\u003eAccelerated floating point libraries on-chip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2021-01-21T18:10:24-05:00","created_at":"2021-01-21T18:08:18-05:00","vendor":"SparkFun","type":"SparkFun","tags":["Raspberry Pi"],"price":695,"price_min":695,"price_max":695,"available":true,"price_varies":false,"compare_at_price":500,"compare_at_price_min":500,"compare_at_price_max":500,"compare_at_price_varies":false,"variants":[{"id":32214144057462,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K698","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Raspberry Pi Pico","public_title":null,"options":["Default Title"],"price":695,"weight":0,"compare_at_price":500,"inventory_quantity":89,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-01.jpg?v=1611270499","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-02.jpg?v=1611270747","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-04.jpg?v=1611270753","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-03.jpg?v=1611270759"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-01.jpg?v=1611270499","options":["Title"],"media":[{"alt":null,"id":7422657658998,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-01.jpg?v=1611270499"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-01.jpg?v=1611270499","width":600},{"alt":null,"id":7422664048758,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-02.jpg?v=1611270747"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-02.jpg?v=1611270747","width":600},{"alt":null,"id":7422664147062,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-04.jpg?v=1611270753"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-04.jpg?v=1611270753","width":600},{"alt":null,"id":7422664310902,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-03.jpg?v=1611270759"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/17829-Raspberry_Pi_Pico-03.jpg?v=1611270759","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It feature the RP2040 which marks Raspberry Pi's first microcontroller designed in-house. Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and decoupling and USB connector). The majority of the RP2040 microcontroller pins are brought to the user IO pins on the left and right edge of the board. Four RP2040 IO are used for internal functions - driving an LED, on-board Switched Mode Power Supply (SMPS) power control and sensing the system voltages.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom\u003c\/li\u003e\n\u003cli\u003eDual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz\u003c\/li\u003e\n\u003cli\u003e264kB of SRAM, and 2MB of on-board Flash memory\u003c\/li\u003e\n\u003cli\u003eCastellated module allows soldering direct to carrier boards\u003c\/li\u003e\n\u003cli\u003eLow-power sleep and dormant modes\u003c\/li\u003e\n\u003cli\u003eDrag \u0026amp; drop programming using mass storage over USB\u003c\/li\u003e\n\u003cli\u003e26 multi-function GPIO pins\u003c\/li\u003e\n\u003cli\u003e2× SPI, 2× I2C, 2× UART, 3× 12-bit ADC, 16× controllable PWM channels\u003c\/li\u003e\n\u003cli\u003eTemperature sensor\u003c\/li\u003e\n\u003cli\u003eAccelerated floating point libraries on-chip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e"}

{"id":4330420109430,"title":"SparkFun WAV Trigger","handle":"sparkfun-wav-trigger","description":"\u003cp\u003eThe WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supporting up to 2048 uncompressed 16-bit, 44.1kHz wav files – the same quality as an audio CD – the WAV Trigger can play and mix up to 14 stereo tracks simultaneously and independently, with very low latency. Tracks can be controlled via 16 programmable trigger inputs, or by using a native serial control protocol or even MIDI.\u003c\/p\u003e\u003cp\u003eTrigger inputs can be connected directly to switches and buttons, or to digital outputs from sensors or another microcontroller. Alternate functions can be specified using a free cross-platform GUI application, and allow triggers to play sequential or random tracks, pause and resume groups of tracks and even control volume. An Arduino library allows for complex serial control like real-time mixing, starting multiple tracks in sample-sync and smooth cross-fading between tracks.\u003c\/p\u003e\u003cp\u003eOn-board sample rate conversion allows for smoothly changing playback speed\/pitch from 0.5x to 2x. in real-time.\u003c\/p\u003e\u003cp\u003eMIDI allows you to use the WAV Trigger as a polyphonic sampling synthesizer to play your own sounds from any MIDI keyboard controller. MIDI Channels and Note numbers are mapped to track numbers, and MIDI Controllers adjust volume as well as attack and release times. MIDI Program Change is supported to switch between up to 16 banks of 128 sounds. The WAV Trigger audio engine even implements, pitch bending, voice stealing (oldest playing voices are used for new MIDI Notes when all 14 voices are being used), note attack (fade-in), note release (fade-out) and latency averages 8 ms.\u003c\/p\u003e\u003cp\u003eThe WAV Trigger supports both SDSC (up to 2GB) and SDHC (up to 32GB) type microSD cards.\u003c\/p\u003e\u003cp\u003eCheck the link in the documents below to keep up with the latest Firmware updates!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product is a collaboration with Robertsonics. A portion of each sales goes back to them for product support and continued development.\u003c\/p\u003e","published_at":"2019-10-31T15:22:26-04:00","created_at":"2019-10-31T09:44:08-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":5190,"price_min":5190,"price_max":5190,"available":true,"price_varies":false,"compare_at_price":5195,"compare_at_price_min":5195,"compare_at_price_max":5195,"compare_at_price_varies":false,"variants":[{"id":31071699665014,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K581","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun WAV Trigger","public_title":null,"options":["Default Title"],"price":5190,"weight":0,"compare_at_price":5195,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"845156006427","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12897-02.jpg?v=1572529448"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12897-02.jpg?v=1572529448","options":["Title"],"media":[{"alt":null,"id":5516066750582,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12897-02.jpg?v=1572529448"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12897-02.jpg?v=1572529448","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supporting up to 2048 uncompressed 16-bit, 44.1kHz wav files – the same quality as an audio CD – the WAV Trigger can play and mix up to 14 stereo tracks simultaneously and independently, with very low latency. Tracks can be controlled via 16 programmable trigger inputs, or by using a native serial control protocol or even MIDI.\u003c\/p\u003e\u003cp\u003eTrigger inputs can be connected directly to switches and buttons, or to digital outputs from sensors or another microcontroller. Alternate functions can be specified using a free cross-platform GUI application, and allow triggers to play sequential or random tracks, pause and resume groups of tracks and even control volume. An Arduino library allows for complex serial control like real-time mixing, starting multiple tracks in sample-sync and smooth cross-fading between tracks.\u003c\/p\u003e\u003cp\u003eOn-board sample rate conversion allows for smoothly changing playback speed\/pitch from 0.5x to 2x. in real-time.\u003c\/p\u003e\u003cp\u003eMIDI allows you to use the WAV Trigger as a polyphonic sampling synthesizer to play your own sounds from any MIDI keyboard controller. MIDI Channels and Note numbers are mapped to track numbers, and MIDI Controllers adjust volume as well as attack and release times. MIDI Program Change is supported to switch between up to 16 banks of 128 sounds. The WAV Trigger audio engine even implements, pitch bending, voice stealing (oldest playing voices are used for new MIDI Notes when all 14 voices are being used), note attack (fade-in), note release (fade-out) and latency averages 8 ms.\u003c\/p\u003e\u003cp\u003eThe WAV Trigger supports both SDSC (up to 2GB) and SDHC (up to 32GB) type microSD cards.\u003c\/p\u003e\u003cp\u003eCheck the link in the documents below to keep up with the latest Firmware updates!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product is a collaboration with Robertsonics. A portion of each sales goes back to them for product support and continued development.\u003c\/p\u003e"}

{"id":4330418995318,"title":"SparkFun RedBoard - Programmed with Arduino","handle":"sparkfun-redboard-programmed-with-arduino-dev-13975","description":"\u003cp\u003eAt SparkFun we use many Arduinos and we're always looking for the simplest, most stable one. Each board is a bit different and no one board has everything we want, so we decided to make our own version that combines all our favorite features. The SparkFun RedBoard combines the simplicity of the UNO's Optiboot bootloader (which is used in the Pro series), the stability of the FTDI (which we all missed after the Duemilanove was discontinued) and the R3 shield compatibility of the latest Arduino UNO R3.\u003c\/p\u003e\u003cp\u003eThe RedBoard can be programmed over a USB Mini-B cable using the Arduino IDE: Just plug in the board, select \"Arduino UNO\" from the board menu and you're ready to upload code. RedBoard has all of the hardware peripherals you know and love: 14 Digital I\/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts. We've also broken out the SDA, SCL and IOREF pins that showed up on the UNO R3, so the RedBoard will be compatible with future shields. This version adds an SMD ISP header for use with shields.\u003c\/p\u003e\u003cp\u003eYou can power the RedBoard over USB or through the barrel jack. The on-board power regulator can handle anything from 7 to 15VDC. Check out the related items below for a compatible wall-wart power supply.\u003c\/p\u003e\n\u003cdiv class=\"center-block text-center\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/redboard-hookup-guide\" class=\"btn btn-default\"\u003eGet Started With the SparkFun RedBoard Guide\u003c\/a\u003e \u003c\/div\u003e","published_at":"2019-10-31T11:14:44-04:00","created_at":"2019-10-31T09:43:34-04:00","vendor":"SparkFun","type":"SparkFun","tags":["Microcontroller"],"price":1595,"price_min":1595,"price_max":1595,"available":true,"price_varies":false,"compare_at_price":1995,"compare_at_price_min":1995,"compare_at_price_max":1995,"compare_at_price_varies":false,"variants":[{"id":31071698255990,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K570","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun RedBoard - Programmed with Arduino","public_title":null,"options":["Default Title"],"price":1595,"weight":0,"compare_at_price":1995,"inventory_quantity":23,"inventory_management":"shopify","inventory_policy":"continue","barcode":"845156009022","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13975-01.jpg?v=1572529414"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13975-01.jpg?v=1572529414","options":["Title"],"media":[{"alt":null,"id":5516063473782,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13975-01.jpg?v=1572529414"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13975-01.jpg?v=1572529414","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eAt SparkFun we use many Arduinos and we're always looking for the simplest, most stable one. Each board is a bit different and no one board has everything we want, so we decided to make our own version that combines all our favorite features. The SparkFun RedBoard combines the simplicity of the UNO's Optiboot bootloader (which is used in the Pro series), the stability of the FTDI (which we all missed after the Duemilanove was discontinued) and the R3 shield compatibility of the latest Arduino UNO R3.\u003c\/p\u003e\u003cp\u003eThe RedBoard can be programmed over a USB Mini-B cable using the Arduino IDE: Just plug in the board, select \"Arduino UNO\" from the board menu and you're ready to upload code. RedBoard has all of the hardware peripherals you know and love: 14 Digital I\/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts. We've also broken out the SDA, SCL and IOREF pins that showed up on the UNO R3, so the RedBoard will be compatible with future shields. This version adds an SMD ISP header for use with shields.\u003c\/p\u003e\u003cp\u003eYou can power the RedBoard over USB or through the barrel jack. The on-board power regulator can handle anything from 7 to 15VDC. Check out the related items below for a compatible wall-wart power supply.\u003c\/p\u003e\n\u003cdiv class=\"center-block text-center\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/redboard-hookup-guide\" class=\"btn btn-default\"\u003eGet Started With the SparkFun RedBoard Guide\u003c\/a\u003e \u003c\/div\u003e"}

{"id":4328850227318,"title":"SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic)","handle":"sparkfun-gps-rtk2-board-zed-f9p-qwiic","description":"\u003cp\u003eWith GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dialing in the accuracy on their GPS modules to to just millimeters, and that's why we had to put it on this board!\u003c\/p\u003e\u003cp\u003eThe SparkFun GPS-RTK2 raises the bar for high-precision GPS and is the latest in a line of powerful RTK boards featuring the ZED-F9P module from u-blox. The ZED-F9P is a top-of-the-line module for high accuracy GNSS and GPS location solutions including RTK that is capable of 10mm, three-dimensional accuracy. With this board, you will be able to know where your (or any object's) X, Y, and Z location is within roughly the width of your fingernail! The ZED-F9P is unique in that it is capable of both rover and base station operations. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1\"-spaced pins in case you prefer to use a breadboard.\u003c\/p\u003e\u003cp\u003eWe've even included a rechargable backup battery to keep the latest module configuration and satellite data available for up to two weeks. This battery helps 'warm-start' the module decreasing the time-to-first-fix dramatically. This module features a survey-in mode allowing the module to become a base station and produce RTCM 3.x correction data.\u003c\/p\u003e\u003cp\u003eThe number of configuration options of the ZED-F9P is incredible! Geofencing, variable I2C address, variable update rates, even the high precision RTK solution can be increased to 20Hz. The GPS-RTK2 even has five communications ports which are all active simultaneously: USB-C (which enumerates as a COM port), UART1 (with 3.3V TTL), UART2 for RTCM reception (with 3.3V TTL), I2C (via the two Qwiic connnectors or broken out pins), and SPI.\u003c\/p\u003e\u003cp\u003eWe've also written an extensive \u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_Ublox_Arduino_Library\" target=\"_blank\"\u003eArduino library for u-blox modules\u003c\/a\u003e to make reading and controlling the GPS-RTK2 easy. Leave NMEA behind! Start using a much lighter weight binary interface and give your microcontroller (and its one serial port) a break. The SparkFun Arduino library shows how to read latitude, longitude, even heading and speed over I2C without the need for constant serial polling.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2019-10-31T15:18:45-04:00","created_at":"2019-10-29T15:32:27-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":24995,"price_min":24995,"price_max":24995,"available":false,"price_varies":false,"compare_at_price":21995,"compare_at_price_min":21995,"compare_at_price_max":21995,"compare_at_price_varies":false,"variants":[{"id":31048584953974,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K580","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic)","public_title":null,"options":["Default Title"],"price":24995,"weight":113,"compare_at_price":21995,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"845156009152","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15136-SparkFun_GPS-RTK2_Board_-_ZED-F9P__Qwiic_-03.jpg?v=1572377547"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15136-SparkFun_GPS-RTK2_Board_-_ZED-F9P__Qwiic_-03.jpg?v=1572377547","options":["Title"],"media":[{"alt":null,"id":5505305903222,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15136-SparkFun_GPS-RTK2_Board_-_ZED-F9P__Qwiic_-03.jpg?v=1572377547"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15136-SparkFun_GPS-RTK2_Board_-_ZED-F9P__Qwiic_-03.jpg?v=1572377547","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eWith GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dialing in the accuracy on their GPS modules to to just millimeters, and that's why we had to put it on this board!\u003c\/p\u003e\u003cp\u003eThe SparkFun GPS-RTK2 raises the bar for high-precision GPS and is the latest in a line of powerful RTK boards featuring the ZED-F9P module from u-blox. The ZED-F9P is a top-of-the-line module for high accuracy GNSS and GPS location solutions including RTK that is capable of 10mm, three-dimensional accuracy. With this board, you will be able to know where your (or any object's) X, Y, and Z location is within roughly the width of your fingernail! The ZED-F9P is unique in that it is capable of both rover and base station operations. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1\"-spaced pins in case you prefer to use a breadboard.\u003c\/p\u003e\u003cp\u003eWe've even included a rechargable backup battery to keep the latest module configuration and satellite data available for up to two weeks. This battery helps 'warm-start' the module decreasing the time-to-first-fix dramatically. This module features a survey-in mode allowing the module to become a base station and produce RTCM 3.x correction data.\u003c\/p\u003e\u003cp\u003eThe number of configuration options of the ZED-F9P is incredible! Geofencing, variable I2C address, variable update rates, even the high precision RTK solution can be increased to 20Hz. The GPS-RTK2 even has five communications ports which are all active simultaneously: USB-C (which enumerates as a COM port), UART1 (with 3.3V TTL), UART2 for RTCM reception (with 3.3V TTL), I2C (via the two Qwiic connnectors or broken out pins), and SPI.\u003c\/p\u003e\u003cp\u003eWe've also written an extensive \u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_Ublox_Arduino_Library\" target=\"_blank\"\u003eArduino library for u-blox modules\u003c\/a\u003e to make reading and controlling the GPS-RTK2 easy. Leave NMEA behind! Start using a much lighter weight binary interface and give your microcontroller (and its one serial port) a break. The SparkFun Arduino library shows how to read latitude, longitude, even heading and speed over I2C without the need for constant serial polling.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e"}

{"id":4489593946230,"title":"Teensy 4.1","handle":"teensy-4-1","description":"\u003cp\u003eThe Teensy 4.1 is newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same size and shape as the Teensy 3.6 (2.4in by 0.7in), and provides greater I\/O capability, including an ethernet PHY, SD card socket, and USB host port.\u003c\/p\u003e\u003cp\u003eWhen running at 600 MHz, the Teensy 4.1 consumes approximately 100mA current and provides support for dynamic clock scaling. Unlike traditional microcontrollers, where changing the clock speed causes wrong baud rates and other issues, Teensy 4.1 hardware and Teensyduino's software support for Arduino timing functions are designed to allow dynamically speed changes. Serial baud rates, audio streaming sample rates, and Arduino functions like delay() and millis(), and Teensyduino's extensions like IntervalTimer and elapsedMillis, continue to work properly while the CPU changes speed. Teensy 4.1 also provides a power shut off feature. By connecting a pushbutton to the On\/Off pin, the 3.3V power supply can be completely disabled by holding the button for five seconds, and turned back on by a brief button press. If a coin cell is connected to VBAT, Teensy 4.1's RTC also continues to keep track of date \u0026amp; time while the power is off. Teensy 4.1 also can also be overclocked, well beyond 600MHz!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Please be aware that the Teensy 4.1 does not include headers and will need to be purchased separately and soldered on yourself.\u003c\/p\u003e","published_at":"2020-05-12T12:12:06-04:00","created_at":"2020-05-12T12:11:58-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":2995,"price_min":2995,"price_max":2995,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31710779277430,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K690","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Teensy 4.1","public_title":null,"options":["Default Title"],"price":2995,"weight":0,"compare_at_price":null,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"continue","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/teensy41_3.jpg?v=1589299918"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/teensy41_3.jpg?v=1589299918","options":["Title"],"media":[{"alt":null,"id":6513617141878,"position":1,"preview_image":{"aspect_ratio":1.266,"height":632,"width":800,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/teensy41_3.jpg?v=1589299918"},"aspect_ratio":1.266,"height":632,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/teensy41_3.jpg?v=1589299918","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Teensy 4.1 is newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same size and shape as the Teensy 3.6 (2.4in by 0.7in), and provides greater I\/O capability, including an ethernet PHY, SD card socket, and USB host port.\u003c\/p\u003e\u003cp\u003eWhen running at 600 MHz, the Teensy 4.1 consumes approximately 100mA current and provides support for dynamic clock scaling. Unlike traditional microcontrollers, where changing the clock speed causes wrong baud rates and other issues, Teensy 4.1 hardware and Teensyduino's software support for Arduino timing functions are designed to allow dynamically speed changes. Serial baud rates, audio streaming sample rates, and Arduino functions like delay() and millis(), and Teensyduino's extensions like IntervalTimer and elapsedMillis, continue to work properly while the CPU changes speed. Teensy 4.1 also provides a power shut off feature. By connecting a pushbutton to the On\/Off pin, the 3.3V power supply can be completely disabled by holding the button for five seconds, and turned back on by a brief button press. If a coin cell is connected to VBAT, Teensy 4.1's RTC also continues to keep track of date \u0026amp; time while the power is off. Teensy 4.1 also can also be overclocked, well beyond 600MHz!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Please be aware that the Teensy 4.1 does not include headers and will need to be purchased separately and soldered on yourself.\u003c\/p\u003e"}

{"id":4357146738806,"title":"SparkFun USB to TTL Serial Cable","handle":"sparkfun-usb-to-ttl-serial-cable","description":"\u003cp\u003eThis is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I\/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on the Raspberry Pi.\u003c\/p\u003e\u003cp\u003eThe FTDI cable is designed around an FT232, which is housed in a USB-A connector. The other side of the cable is terminated with a separated 4-pin connector with the following pinout: RX (Yellow), TX (Orange), VCC (3.3V) (Red), and GND (Black).\u003c\/p\u003e","published_at":"2020-02-12T16:44:27-05:00","created_at":"2019-11-26T17:25:53-05:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":1095,"price_min":1095,"price_max":1095,"available":true,"price_varies":false,"compare_at_price":1095,"compare_at_price_min":1095,"compare_at_price_max":1095,"compare_at_price_varies":false,"variants":[{"id":31261041066102,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K602","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun USB to TTL Serial Cable","public_title":null,"options":["Default Title"],"price":1095,"weight":0,"compare_at_price":1095,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12977-00.jpg?v=1574807153"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12977-00.jpg?v=1574807153","options":["Title"],"media":[{"alt":null,"id":5693296967798,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12977-00.jpg?v=1574807153"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12977-00.jpg?v=1574807153","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I\/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on the Raspberry Pi.\u003c\/p\u003e\u003cp\u003eThe FTDI cable is designed around an FT232, which is housed in a USB-A connector. The other side of the cable is terminated with a separated 4-pin connector with the following pinout: RX (Yellow), TX (Orange), VCC (3.3V) (Red), and GND (Black).\u003c\/p\u003e"}

{"id":4330420207734,"title":"SparkFun Qwiic HAT for Raspberry Pi","handle":"sparkfun-qwiic-hat-for-raspberry-pi","description":"\u003cp\u003eThe SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic HAT connects the I2C bus (GND, 3.3V, SDA and SCL) on your Raspberry Pi to an array of Qwiic connectors on the HAT. Since the Qwiic system allows for daisy chaining boards with different addresses, you can stack as many sensors as you’d like to create a tower of sensing power!\u003c\/p\u003e\u003cp\u003eThe Qwiic Pi HAT has four Qwiic connect ports, all on the same I2C bus. In addition, many of the useful GPIO pins on the Raspberry Pi are broken out. This HAT is compatible with any Raspberry Pi that utilizes the standard 2x20 GPIO header. It has been designed to sit to the side of the Pi, allowing it to work conveniently with a \u003ca href=\"https:\/\/www.sparkfun.com\/categories\/tags\/pi-tin\" target=\"_blank\"\u003ePi Tin enclosure\u003c\/a\u003e to connect boards to the Qwiic ports.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThe SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e There is a small silk error that has reversed the SDA and SCL. This is simply a cosmetic mix-up and will not impact any function with this board.\u003c\/p\u003e","published_at":"2019-10-31T15:25:44-04:00","created_at":"2019-10-31T09:44:12-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":590,"price_min":590,"price_max":590,"available":true,"price_varies":false,"compare_at_price":595,"compare_at_price_min":595,"compare_at_price_max":595,"compare_at_price_varies":false,"variants":[{"id":31071699763318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K582","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun Qwiic HAT for Raspberry Pi","public_title":null,"options":["Default Title"],"price":590,"weight":0,"compare_at_price":595,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"continue","barcode":"845156008506","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14459-01.jpg?v=1572529452"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14459-01.jpg?v=1572529452","options":["Title"],"media":[{"alt":null,"id":5516067274870,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14459-01.jpg?v=1572529452"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14459-01.jpg?v=1572529452","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic HAT connects the I2C bus (GND, 3.3V, SDA and SCL) on your Raspberry Pi to an array of Qwiic connectors on the HAT. Since the Qwiic system allows for daisy chaining boards with different addresses, you can stack as many sensors as you’d like to create a tower of sensing power!\u003c\/p\u003e\u003cp\u003eThe Qwiic Pi HAT has four Qwiic connect ports, all on the same I2C bus. In addition, many of the useful GPIO pins on the Raspberry Pi are broken out. This HAT is compatible with any Raspberry Pi that utilizes the standard 2x20 GPIO header. It has been designed to sit to the side of the Pi, allowing it to work conveniently with a \u003ca href=\"https:\/\/www.sparkfun.com\/categories\/tags\/pi-tin\" target=\"_blank\"\u003ePi Tin enclosure\u003c\/a\u003e to connect boards to the Qwiic ports.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThe SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e There is a small silk error that has reversed the SDA and SCL. This is simply a cosmetic mix-up and will not impact any function with this board.\u003c\/p\u003e"}

{"id":4330418274422,"title":"Teensy LC - Without Pins - MKL26Z64","handle":"teensy-lc-without-pins","description":"\u003cp\u003eThe Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy LC (Low Cost) is a 32 bit microcontroller board that provides you with an uncomplicated option for getting started with the Teensy line of products without breaking the bank!\u003c\/p\u003e\u003cp\u003eThe Teensy LC comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C \u003cem\u003eor\u003c\/em\u003e you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access and an I2S digital audio interface! There are also 2 separate interval timers! Also, the Teensy LC can provide system voltage of 3.3V or 5V to other devices at up to 5-20mA.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eAll of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1\" grid so you can slap it on a breadboard and get to work! So, what sets the Teensy LC apart from the Teensy 3.1? First off, this version has been streamlined to be as cost effective as possible. Obviously, the LC doesn't share a lot of power that the 3.1 possesses but by no means does it make the LC a 'weak' board! The Teensy LC is equipped with 8kB RAM, 62kB of flash memory, and 27 Digital I\/O pins with 13 high res Analog inputs.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The Teensy LC does not come with a micro-B USB cable, please check the \u003cem\u003eRecommended Products\u003c\/em\u003e section below for an appropriate one.\u003c\/p\u003e","published_at":"2020-04-01T11:27:27-04:00","created_at":"2019-10-31T09:43:16-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":1349,"price_min":1349,"price_max":1349,"available":true,"price_varies":false,"compare_at_price":1295,"compare_at_price_min":1295,"compare_at_price_max":1295,"compare_at_price_varies":false,"variants":[{"id":31071697436790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K564","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Teensy LC - Without Pins - MKL26Z64","public_title":null,"options":["Default Title"],"price":1349,"weight":0,"compare_at_price":1295,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13305-02.jpg?v=1572529396","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/teensylc_front_pinout.png?v=1585754873"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13305-02.jpg?v=1572529396","options":["Title"],"media":[{"alt":null,"id":5516061343862,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13305-02.jpg?v=1572529396"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13305-02.jpg?v=1572529396","width":600},{"alt":null,"id":6294877929590,"position":2,"preview_image":{"aspect_ratio":0.873,"height":440,"width":384,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/teensylc_front_pinout.png?v=1585754873"},"aspect_ratio":0.873,"height":440,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/teensylc_front_pinout.png?v=1585754873","width":384}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy LC (Low Cost) is a 32 bit microcontroller board that provides you with an uncomplicated option for getting started with the Teensy line of products without breaking the bank!\u003c\/p\u003e\u003cp\u003eThe Teensy LC comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using C \u003cem\u003eor\u003c\/em\u003e you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access and an I2S digital audio interface! There are also 2 separate interval timers! Also, the Teensy LC can provide system voltage of 3.3V or 5V to other devices at up to 5-20mA.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eAll of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1\" grid so you can slap it on a breadboard and get to work! So, what sets the Teensy LC apart from the Teensy 3.1? First off, this version has been streamlined to be as cost effective as possible. Obviously, the LC doesn't share a lot of power that the 3.1 possesses but by no means does it make the LC a 'weak' board! The Teensy LC is equipped with 8kB RAM, 62kB of flash memory, and 27 Digital I\/O pins with 13 high res Analog inputs.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The Teensy LC does not come with a micro-B USB cable, please check the \u003cem\u003eRecommended Products\u003c\/em\u003e section below for an appropriate one.\u003c\/p\u003e"}

{"id":4330419880054,"title":"Sparkfun Pocket AVR Programmer","handle":"sparkfun-pocket-avr-programmer","description":"\u003cp\u003eThis new version uses an SMD 5x2 header. This is a simple to use USB AVR programmer. It is low cost, easy to use, works great with \u003ca href=\"http:\/\/ladyada.net\/make\/usbtinyisp\/avrdude.html\" target=\"_blank\"\u003eAVRDude\u003c\/a\u003e, and is tested extensively on a Windows desktop. Based on Dick Streefland's \u003ca href=\"http:\/\/www.xs4all.nl\/~dicks\/avr\/usbtiny\/index.html\" target=\"_blank\"\u003eUSBtiny\u003c\/a\u003e and Limor Fried's \u003ca href=\"http:\/\/www.ladyada.net\/make\/usbtinyisp\/\" target=\"_blank\"\u003eUSBtinyISP\u003c\/a\u003e. This is a low-cost programmer designed for those on a tight budget.\u003c\/p\u003e\u003cp\u003eThis programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros supported by AVRDUDE. The microcontroller-to-be-programmed can be any AVR with 64K or less of flash. The ATmega328 on an Arduino Uno or RedBoard works perfectly, but the ATmega2560 of an Arduino Mega does not.\u003c\/p\u003e\u003cp\u003eThis board is buffered and power protected so that you can do some really evil things to the programmer without killing it. It is fast! One of the greatest features of this board is the ability to power the target (up to 500mA) from the programmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product is a collaboration with Limor Fried. A portion of each sales goes back to them for product support and continued development.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The drivers link has been updated below to be Windows 7 compatible.\u003c\/p\u003e","published_at":"2019-10-31T15:05:44-04:00","created_at":"2019-10-31T09:43:56-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":1690,"price_min":1690,"price_max":1690,"available":true,"price_varies":false,"compare_at_price":1695,"compare_at_price_min":1695,"compare_at_price_max":1695,"compare_at_price_varies":false,"variants":[{"id":31071699337334,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K577","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Sparkfun Pocket AVR Programmer","public_title":null,"options":["Default Title"],"price":1690,"weight":0,"compare_at_price":1695,"inventory_quantity":57,"inventory_management":"shopify","inventory_policy":"continue","barcode":"845156005017","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/09825-01b.jpg?v=1572529436"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/09825-01b.jpg?v=1572529436","options":["Title"],"media":[{"alt":null,"id":5516065996918,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/09825-01b.jpg?v=1572529436"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/09825-01b.jpg?v=1572529436","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis new version uses an SMD 5x2 header. This is a simple to use USB AVR programmer. It is low cost, easy to use, works great with \u003ca href=\"http:\/\/ladyada.net\/make\/usbtinyisp\/avrdude.html\" target=\"_blank\"\u003eAVRDude\u003c\/a\u003e, and is tested extensively on a Windows desktop. Based on Dick Streefland's \u003ca href=\"http:\/\/www.xs4all.nl\/~dicks\/avr\/usbtiny\/index.html\" target=\"_blank\"\u003eUSBtiny\u003c\/a\u003e and Limor Fried's \u003ca href=\"http:\/\/www.ladyada.net\/make\/usbtinyisp\/\" target=\"_blank\"\u003eUSBtinyISP\u003c\/a\u003e. This is a low-cost programmer designed for those on a tight budget.\u003c\/p\u003e\u003cp\u003eThis programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros supported by AVRDUDE. The microcontroller-to-be-programmed can be any AVR with 64K or less of flash. The ATmega328 on an Arduino Uno or RedBoard works perfectly, but the ATmega2560 of an Arduino Mega does not.\u003c\/p\u003e\u003cp\u003eThis board is buffered and power protected so that you can do some really evil things to the programmer without killing it. It is fast! One of the greatest features of this board is the ability to power the target (up to 500mA) from the programmer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This product is a collaboration with Limor Fried. A portion of each sales goes back to them for product support and continued development.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The drivers link has been updated below to be Windows 7 compatible.\u003c\/p\u003e"}