[Used] Dayton Audio DSP-408 4x8 DSP Digital Signal Processor for Home and Car Audio

Highlights

• Real-time signal processing for ultimate control
• Complete audio customization for application specific installations
• Easy-to-use Graphical User Interface (GUI)
• All eight output channels have a fully adjustable 10-band parametric EQ
• Optional Bluetooth dongle (for streaming and app control) and wired remote available

Software Features:

• 10-band parametric equalizer per channel
• High and low shelf EQ per channel
• Variable crossovers: High/Low/Band-Pass slopes 0-24 dB, Linkwitz Riley/Butterworth/Bessel
• Time delay: 0 to 277 cm or 8.1471 ms adjustable in 1 cm steps
• Input/Output mixing to customize the signal path
• Phase adjustment
• Customizable name/ID for each of the 6 presets
• Load, save, recall, or delete preset files
• Software controllable level attenuation on the preamp and high-level inputs
• Minimum/maximum voltage protection
• Reverse voltage protection
• Mute circuit and delay

Package Contents:

• 1 x DSP-408 Processor

• 1 x Power Adapter (12V, 1.5A)

• 1 x High-Level/Power Input Harness (16-pin)

• 1 x USB A to B Cable (10 ft.)

• 2 x Mounting Brackets

• 4 x Mounting Bracket Machine Screws

• 4 x Mounting Screws

• 4 x Rubber Cushion Pads

• 1 x Introduction Card

Chipset: Analog Devices ADAU1701 SigmaDSP 28/56-bit Audio Processor

Sampling: 24-bit/48 kHz • RCA inputs: 4

RCA outputs: 8

High-level inputs: 4

High-level input impedance: 180 ohms

Maximum speaker input level: ≤8V

RCA input impedance: ≥20,000 ohms

Frequency response: 20-20,000 Hz

THD+N: 0.008%

Output impedance: <50 ohms

Maximum input level: ≤3.2V

RCA output: 3.5V rms

Signal to noise ratio: ≥115 dB

Remote out current: >500 mA

Power adapter input voltage: 100-240 VAC

Power adapter output: 12 VDC, 1.5A

Operating voltage: 9-17V

Dimensions: 6.53" W x 1.02" H x 4.55" L