Adafruit PIR Motion Sensor

Save $0.05
AdafruitSKU: K157
No reviews

KJD ELECTRONICS has stopped accepting orders.

This product might be available at PiShop.us.

Please check this blog post about our recent team merger!

Description

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away. This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensitivity and we include a 1 foot (30 cm) cable with a socket so you can easily re-position the sensor or mount it using the two drills on either side

Runs on 5V-12V power (if you need to run it off of 3V you can do that by bypassing the regulator, but that means doing a bit of soldering). Digital signal output is 3.3V high/low. Sensing range is about 7 meters (120 degree cone)

  • Length: 24.03mm/0.94in
  • Width: 32.34mm/1.27in
  • Screw hole distance: 28mm
  • Screw hole diameter: 2mm
  • Height (with lens): 24.66mm/0.97in
  • Weight: 5.87g/0.2oz

PIR sensors and the Raspberry Pi 3 sometimes don't get along - if you're having false trigger reports, make sure the PIR Sensor is far away from the Pi 3 

Estimate shipping

You may also like

Recently viewed