Choose the Dayton Audio DC160S-4 Classic Series 6-1/2" shielded woofer for use as a great replacement bookshelf speaker, midbass in 3-way designs, or even as a small subwoofer.
Dayton Audio Classic Series woofers are excellent for use as replacement speakers or for new loudspeaker system design and construction. The DC160S-4 6-1/2" woofer has developed quite a reputation for having the best bang-for-the-buck performance and value available anywhere. You can even be use the DC160S-4 as a small subwoofer! The excellent low frequency performance will amaze you.
A non-pressed treated paper cone allows for smooth frequency response, while the high temperature aluminum voice coil and vented pole piece combine to increase power handling without compression. Longevity is ensured with the use of a rubber surround, treated cloth dust cap, and an extended bump plate. The 4 ohm impedance of the DC160S-4 makes it perfect for use in MTMs and center channel speakers.
- Treated paper cone provides smooth response and low energy storage
- Aluminum former, vented pole piece, and porous dustcap for high power handling
- Large diameter flat spider and good Xmax for clean bass
Nominal Diameter: 6-1/2"
Power Handling (RMS): 50 Watts
Power Handling (max): 100 Watts
Impedance: 4 ohms
Frequency Response: 33 to 4,000 Hz
Sensitivity: 88.5 dB 2.83V/1m
Voice Coil Diameter: 1.38"
Resonant Frequency (Fs): 30.9 Hz
DC Resistance (Re): 3.5 ohms
Voice Coil Inductance (Le): 0.89 mH
Mechanical Q (Qms): 2.61
Electromagnetic Q (Qes): 0.34
Total Q (Qts): 0.30
Compliance Equivalent Volume (Vas): 0.82 ft.³
Mechanical Compliance of Suspension (Cms): 0.88 mm/N
BL Product (BL): 7.68 Tm
Diaphragm Mass Inc. Airload (Mms): 30g
Maximum Linear Excursion (Xmax): 3.4 mm
Surface Area of Cone (Sd): 136.8 cm²
Materials of Construction
Cone Material: Treated Paper
Surround Material: Rubber
Voice Coil Wire Material: Copper
Voice Coil Former: Aluminum
Basket / Frame Material: Steel
Magnet Material: Ferrite
Overall Outside Diameter: 6.5"
Baffle Cutout Diameter: 5.69"
Bolt Circle Diameter: 6.16"
# Mounting Holes: 4
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
Sealed Volume: 0.15 ft.³
Sealed F3: 90 Hz
Vented Volume: 0.41 ft.³
Vented F3: 52 Hz
Dayton Audio DC160S-4 6-1/2" Classic Shielded Woofer 4 Ohm
Brand: Dayton Audio
Part Number: 295-308
Product Category: Woofers
Unit of Measure: EA
Weight: : 5 lbs