CAPUF ESP32 Programmer
CAPUF ESP32 Programmer
CAPUF ESP32 Programmer
CAPUF ESP32 Programmer
Roll over image to zoom in Click on image to zoom
CAPUF ESP32 ProgrammerCAPUF ESP32 ProgrammerCAPUF ESP32 ProgrammerCAPUF ESP32 Programmer

CAPUF ESP32 Programmer

CAPUF EmbeddedSKU: K805
No reviews

KJD ELECTRONICS has stopped accepting orders.

This product might be available at PiShop.us.

Please check this blog post about our recent team merger!

Description

ESP Prog is ESP32 Programmer board.

It can be used in multiple ways like use it for programming ESP8266, ESP32, or any other microcontroller which needs boot Pin and Reset Pin control along with UART RX, and TX for flashing the MCU with a new program.

Or, one can also use it as a USB to UART adapter.

FEATURES

  • Compact size: 50mmx30mm
  • USB-C Type Interface: you can connect a USB in any direction. Use USB-A to USB-C Cable.
  • LEDs for Power, RX, TX
  • Switch for Reset and Boot
  • Both 3.3V and 5V are available on the O/P connector
  • All signals on a standard 2.54mm Pitch Header (Header will come along with the board (unsoldered))


ESP PROG PINOUT

  1. 3.3V DC (100mA Max.)
  2. TXD
  3. RXD
  4. GND
  5. Reset/RTS
  6. Boot/DTR
  7. GND
  8. 5V DC (500mA Max.)

ESP PROG CONNECTIONS

You may also like

Recently viewed