BitScope MP01A BNC Adapter, Micro Oscilloscope

Save $0.05
BitScopeSKU: K217
No reviews

Sale price $29.90 Regular price$29.95
Sold out


The MP01A from Bitscope is a dual channel, mixed signal BNC port adapter for BitScope Micro oscilloscopes. It allows use of industry standard oscilloscope probes. The BNC sockets are supplied with ring nuts and washers so MP01A can be bench mounted. The logic waveform generator and clock signals appear on the 16pin header between BNC sockets. The analogue inputs are replicated on the 16 pin header and every input has an associated ground pin below it. Two terminator plugs are included to ground any pair of inputs or to route the waveform generator and/or clock outputs to BNC sockets. The adapter connects via BitScope Micro diagnostic port allowing 1:1, 10:1, 100:1 and other standard attenuating oscilloscope probes as well as current, differential or any other type of BNC terminated sensor designed for use with 1MΩ/20pF oscilloscope inputs.

  • 6 logic inputs and switchable waveform and clock generator outputs
  • Ring nuts
  • Washers
  • Analogue input impedance of 1Mohm/20pF
  • Digital input impedance of 100Kohm/5pF
  • Direct voltage range from 7.5V to 10.8V (1:1 probe)
  • Scaled voltage range from -75V to 108V (10:1 probe)
  • Operating temperature range from 0°C to 40°C
  • Dimensions is 60mm x 50mm x 20mm
  • Terminators and adjustable signal routing
  • Twisted pairs for logic inputs and outputs
  • Connects BNC terminated coaxial cable
  • Attenuating, differential and current probes

You may also like

Recently viewed