Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates - PA1616S

Save $10.05
AdafruitSKU: K36 | UPC: 00700598870640
No reviews

Sale price $29.90 Regular price$39.95
Automatic 10% Discount Available
Create an account and Sign Up for our Newsletter to get Adafruit Member Pricing and Save 10% on Adafruit Products like this!
Sold out
Buy On Amazon


This GPS module is one of the best made so far. It comes with an array of features, includings:

  • • -165 dBm sensitivity, 10 Hz updates, 66 channels
  • • 5V friendly design and only 20mA current draw
  • • Breadboard friendly + two mounting holes
  • • RTC battery-compatible
  • • Built-in datalogging
  • • PPS output on fix
  • • Internal patch antenna + u.FL connector for external active antenna
  • • Fix status LED
  • • External antenna support and Pulse-Per-Second output

Best of all, we added all the extra goodies you could ever want: a ultra-low dropout 3.3V regulator so you can power it with 3.3-5VDC in, 5V level safe inputs, ENABLE pin so you can turn off the module using any microcontroller pin or switch, a footprint for optional CR1220 coin cell to keep the RTC running and allow warm starts and a tiny bright red LED. The LED blinks at about 1Hz while it's searching for satellites and blinks once every 15 seconds when a fix is found to conserve power. If you want to have an LED on all the time, we also provide the FIX signal out on a pin so you can put an external LED on.

If you are using a feather board for your GPS projects, you can find the Adafruit Ultimate GPS FeatherWing here

  • One fully assembled and tested module
  • a piece of header you can solder to it for breadboarding
  • A CR1220 coin cell holder

Please note: CR1220 coin cell not included

  • Satellites: 22 tracking, 66 searching
  • Patch Antenna Size: 15mm x 15mm x 4mm
  • Update rate: 1 to 10 Hz
  • Position Accuracy: < 3 meters
  • Velocity Accuracy: 0.1 meters/s
  • Warm/cold start: 34 seconds
  • Acquisition sensitivity: -145 dBm
  • Tracking sensitivity: -165 dBm
  • Maximum Velocity: 515m/s
  • Vin range: 3.0-5.5VDC
  • MTK3339 Operating current: 25mA tracking, 20 mA current draw during navigation
  • Output: NMEA 0183, 9600 baud default
  • DGPS/WAAS/EGNOS supported
  • FCC E911 compliance and AGPS support (Offline mode : EPO valid up to 14 days )
  • Up to 210 PRN channels
  • Jammer detection and reduction
  • Multi-path detection and compensation

Breakout board details:

  • Weight (not including coin cell or holder): 8.5g
  • Dimensions (not including coin cell or holder): 25.5mm x 35mm x 6.5mm / 1.0" x 1.35" x 0.25"

You may also like

Recently viewed