15% off Adafruit | Free Shipping Over $25 | Spend $150 Get Arduino Uno Free (Code: 150-FREE-UNO)

{"id":4344373641334,"title":"Arduino MKR WiFi 1010 [ABX00023]","handle":"arduino-mkr-wifi-1010-abx00023","description":"\u003cp\u003eWant to add a WiFi interface to your devices? Get the MKR WIFI 1010. It connects easily to other Arduino products and is configurable using Arduino software — and you don’t need to be a network expert. This is the newest version of the MKR 1000 WIFI, but with an ESP32 module on board made by U-BLOX.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It's equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption. The MKR WIFI 1010 also has WiFi and Bluetooth module based on ESP32. The board is composed of three main blocks: SAMD21 Cortex-M0+ 32bit Low Power ARM MCU;\u003c\/li\u003e\n\u003cli\u003eU-BLOX NINA-W10 Series Low Power 2.4GHz IEEE® 802.11 b\/g\/n Wi-Fi; and\u003c\/li\u003e\n\u003cli\u003eECC508 Crypto Authentication. (\u003ca href=\"http:\/\/ww1.microchip.com\/downloads\/en\/DeviceDoc\/20005927A.pdf\" target=\"_blank\"\u003edatasheet\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe MKR WIFI 1010 includes 32-bit computational power, the usual rich set of I\/O interfaces, and low power Wi-Fi with a Cryptochip for secure communication using SHA-256 encryption. Plus, it offers ease of use Arduino Software (IDE) for code development and programming. All of these features make this board the preferred choice for the emerging IoT battery-powered projects in a compact form. Its USB port can be used to supply power (5V) to the board. It has a Li-Po charging circuit that allows the Arduino MKR WIFI 1010 to run on battery power or an external 5 volt source, charging the Li-Po battery while running on external power. Switching from one source to the other is done automatically. \u003cstrong\u003eWarning:\u003c\/strong\u003e Unlike most Arduino boards, the MKR WIFI 1010 runs at 3.3V. The maximum voltage that the I\/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I\/O pin could damage the board. While output to 5V digital devices is possible, bidirectional communication with 5V devices needs proper level shifting.\u003c\/p\u003e","published_at":"2019-11-15T09:55:27-05:00","created_at":"2019-11-14T15:23:13-05:00","vendor":"Arduino, LLC","type":"Arduino, LLC","tags":[],"price":3385,"price_min":3385,"price_max":3385,"available":true,"price_varies":false,"compare_at_price":3390,"compare_at_price_min":3390,"compare_at_price_max":3390,"compare_at_price_varies":false,"variants":[{"id":31217097932918,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K482","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Arduino MKR WiFi 1010 [ABX00023]","public_title":null,"options":["Default Title"],"price":3385,"weight":0,"compare_at_price":3390,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/61vqDLlB44L._SL1000.jpg?v=1573762994"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/61vqDLlB44L._SL1000.jpg?v=1573762994","options":["Title"],"content":"\u003cp\u003eWant to add a WiFi interface to your devices? Get the MKR WIFI 1010. It connects easily to other Arduino products and is configurable using Arduino software — and you don’t need to be a network expert. This is the newest version of the MKR 1000 WIFI, but with an ESP32 module on board made by U-BLOX.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It's equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption. The MKR WIFI 1010 also has WiFi and Bluetooth module based on ESP32. The board is composed of three main blocks: SAMD21 Cortex-M0+ 32bit Low Power ARM MCU;\u003c\/li\u003e\n\u003cli\u003eU-BLOX NINA-W10 Series Low Power 2.4GHz IEEE® 802.11 b\/g\/n Wi-Fi; and\u003c\/li\u003e\n\u003cli\u003eECC508 Crypto Authentication. (\u003ca href=\"http:\/\/ww1.microchip.com\/downloads\/en\/DeviceDoc\/20005927A.pdf\" target=\"_blank\"\u003edatasheet\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe MKR WIFI 1010 includes 32-bit computational power, the usual rich set of I\/O interfaces, and low power Wi-Fi with a Cryptochip for secure communication using SHA-256 encryption. Plus, it offers ease of use Arduino Software (IDE) for code development and programming. All of these features make this board the preferred choice for the emerging IoT battery-powered projects in a compact form. Its USB port can be used to supply power (5V) to the board. It has a Li-Po charging circuit that allows the Arduino MKR WIFI 1010 to run on battery power or an external 5 volt source, charging the Li-Po battery while running on external power. Switching from one source to the other is done automatically. \u003cstrong\u003eWarning:\u003c\/strong\u003e Unlike most Arduino boards, the MKR WIFI 1010 runs at 3.3V. The maximum voltage that the I\/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I\/O pin could damage the board. While output to 5V digital devices is possible, bidirectional communication with 5V devices needs proper level shifting.\u003c\/p\u003e"}

Arduino MKR WiFi 1010 [ABX00023]

Product Description

Want to add a WiFi interface to your devices? Get the MKR WIFI 1010. It connects easily to other Arduino products and is configurable using Arduino software — and you don’t need to be a network expert. This is the newest version of the MKR 1000 WIFI, but with an ESP32 module on board made by U-BLOX.

  • The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It's equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption. The MKR WIFI 1010 also has WiFi and Bluetooth module based on ESP32. The board is composed of three main blocks: SAMD21 Cortex-M0+ 32bit Low Power ARM MCU;
  • U-BLOX NINA-W10 Series Low Power 2.4GHz IEEE® 802.11 b/g/n Wi-Fi; and
  • ECC508 Crypto Authentication. (datasheet)

The MKR WIFI 1010 includes 32-bit computational power, the usual rich set of I/O interfaces, and low power Wi-Fi with a Cryptochip for secure communication using SHA-256 encryption. Plus, it offers ease of use Arduino Software (IDE) for code development and programming. All of these features make this board the preferred choice for the emerging IoT battery-powered projects in a compact form. Its USB port can be used to supply power (5V) to the board. It has a Li-Po charging circuit that allows the Arduino MKR WIFI 1010 to run on battery power or an external 5 volt source, charging the Li-Po battery while running on external power. Switching from one source to the other is done automatically. Warning: Unlike most Arduino boards, the MKR WIFI 1010 runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board. While output to 5V digital devices is possible, bidirectional communication with 5V devices needs proper level shifting.

$33.85 $33.90
Maximum quantity available reached.

Microcontroller: SAMD21 Cortex-M0+ 32bit Low Power ARM MCU

Board Power Supply (USB/VIN): 5V

Supported Battery(*): Li-Po Single Cell, 3.7V, 700mAh Minimum

Circuit Operating Voltage: 3.3V

Digital I/O Pins: 8

PWM Pins: 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19)

UART: 1

SPI: 1

I2C: 1

I2S: 1

Connectivity: WiFi

Analog Input Pins: 7 (ADC 8/10/12 bit)

Analog Output Pins: 1 (DAC 10 bit)

External Interrupts: 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17)

DC Current per I/O Pin: 7 mA

Flash Memory: 256 KB

SRAM: 32 KB

EEPROM: No

Clock Speed: 32.768 kHz (RTC), 48 MHz

LED_BUILTIN: 6

Full-Speed USB Device and Embedded Host: Included

Length: 61.5 mm

Width: 25 mm

Weight: 32 gr