SparkFun

{"id":4464782508150,"title":"SparkFun RedBoard Artemis - Machine Learning Development Board","handle":"sparkfun-redboard-artemis-machine-learning-development-board","description":"\u003cp\u003eThink of the RedBoard Artemis as just another Arduino... That has BLE. And one megabyte of flash. And runs at less than 1mA. Oh, and it can run TensorFlow models. Ya, that too. The RedBoard Artemis takes the incredibly powerful Artemis module from SparkFun and wraps it up in an easy to use and familiar Uno footprint. We've written an Arduino core from scratch to make programming the Artemis as familiar as Serial.begin(9600). Time-to-first-blink is less than five minutes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArduino Uno R3 Footprint\u003c\/li\u003e\n\u003cli\u003e1M Flash \/ 384k RAM\u003c\/li\u003e\n\u003cli\u003e48MHz \/ 96MHz turbo available\u003c\/li\u003e\n\u003cli\u003e24 GPIO - all interrupt capable\u003c\/li\u003e\n\u003cli\u003e21 PWM channels\u003c\/li\u003e\n\u003cli\u003eBuilt in BLE radio\u003c\/li\u003e\n\u003cli\u003e10 ADC channels with 14-bit precision\u003c\/li\u003e\n\u003cli\u003e2 UARTs\u003c\/li\u003e\n\u003cli\u003e6 I2C buses\u003c\/li\u003e\n\u003cli\u003e4 SPI buses\u003c\/li\u003e\n\u003cli\u003ePDM Interface\u003c\/li\u003e\n\u003cli\u003eI2S Interface\u003c\/li\u003e\n\u003cli\u003eQwiic Connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2020-04-20T11:04:44-04:00","created_at":"2020-04-20T11:02:58-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":1990,"price_min":1990,"price_max":1990,"available":true,"price_varies":false,"compare_at_price":1995,"compare_at_price_min":1995,"compare_at_price_max":1995,"compare_at_price_varies":false,"variants":[{"id":31599645065334,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K681","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun RedBoard Artemis - Machine Learning Development Board","public_title":null,"options":["Default Title"],"price":1990,"weight":0,"compare_at_price":1995,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"continue","barcode":"845156009817","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15444-SparkFun_RedBoard_Artemis-01.jpg?v=1587394978"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15444-SparkFun_RedBoard_Artemis-01.jpg?v=1587394978","options":["Title"],"media":[{"alt":null,"id":6391644225654,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15444-SparkFun_RedBoard_Artemis-01.jpg?v=1587394978"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/15444-SparkFun_RedBoard_Artemis-01.jpg?v=1587394978","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThink of the RedBoard Artemis as just another Arduino... That has BLE. And one megabyte of flash. And runs at less than 1mA. Oh, and it can run TensorFlow models. Ya, that too. The RedBoard Artemis takes the incredibly powerful Artemis module from SparkFun and wraps it up in an easy to use and familiar Uno footprint. We've written an Arduino core from scratch to make programming the Artemis as familiar as Serial.begin(9600). Time-to-first-blink is less than five minutes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArduino Uno R3 Footprint\u003c\/li\u003e\n\u003cli\u003e1M Flash \/ 384k RAM\u003c\/li\u003e\n\u003cli\u003e48MHz \/ 96MHz turbo available\u003c\/li\u003e\n\u003cli\u003e24 GPIO - all interrupt capable\u003c\/li\u003e\n\u003cli\u003e21 PWM channels\u003c\/li\u003e\n\u003cli\u003eBuilt in BLE radio\u003c\/li\u003e\n\u003cli\u003e10 ADC channels with 14-bit precision\u003c\/li\u003e\n\u003cli\u003e2 UARTs\u003c\/li\u003e\n\u003cli\u003e6 I2C buses\u003c\/li\u003e\n\u003cli\u003e4 SPI buses\u003c\/li\u003e\n\u003cli\u003ePDM Interface\u003c\/li\u003e\n\u003cli\u003eI2S Interface\u003c\/li\u003e\n\u003cli\u003eQwiic Connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e"}

{"id":4357148180598,"title":"SparkFun EasyDriver Stepper Motor Driver","handle":"sparkfun-easydriver-stepper-motor-driver","description":"\u003cp\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.\u003c\/p\u003e\u003cp\u003eThis EasyDriver V4.5 has been co-designed with \u003ca href=\"http:\/\/www.schmalzhaus.com\/\" target=\"_blank\"\u003eBrian Schmalz\u003c\/a\u003e. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/p\u003e","published_at":"2020-03-30T13:31:45-04:00","created_at":"2019-11-26T17:28:49-05:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":1490,"price_min":1490,"price_max":1490,"available":true,"price_varies":false,"compare_at_price":1495,"compare_at_price_min":1495,"compare_at_price_max":1495,"compare_at_price_varies":false,"variants":[{"id":31261046177910,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K607","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun EasyDriver Stepper Motor Driver","public_title":null,"options":["Default Title"],"price":1490,"weight":0,"compare_at_price":1495,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12779-01.jpg?v=1574807329"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12779-01.jpg?v=1574807329","options":["Title"],"media":[{"alt":null,"id":5693307945078,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12779-01.jpg?v=1574807329"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12779-01.jpg?v=1574807329","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.\u003c\/p\u003e\u003cp\u003eThis EasyDriver V4.5 has been co-designed with \u003ca href=\"http:\/\/www.schmalzhaus.com\/\" target=\"_blank\"\u003eBrian Schmalz\u003c\/a\u003e. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.\u003c\/p\u003e"}

{"id":4330418602102,"title":"SparkFun Benchtop Power Board Kit","handle":"sparkfun-benchtop-power-board-kit","description":"\u003cp\u003eYou don’t have the power? Well, there’s no need to ask Scotty – the SparkFun Benchtop Power Board Kit has your back. This board will let you take advantage of your power supply to create a benchtop power supply with enough juice to run almost any of your embedded electronics projects.\u003c\/p\u003e\u003cp\u003eThe benchtop power board kit was created to provide quick access to the typical voltages needed when developing physical computing projects (embedded systems). After assembling the kit you'll have access to four different voltages (3.3V, 5V, 12V and -12V) each with their own replaceable 5A fuse. Each power rail has a corresponding ground connection; all of the power rails are brought out to a binding post. The benchtop power board should be powered by a standard computer power supply with an ATX connector. With this rev we have finally added a power switch and made each standoff to a more appropriate height to fit the mounting posts.\u003c\/p\u003e\u003cp\u003eThis kit is simple to put together and shouldn't take more than 30-45 minutes for a beginner.\u003c\/p\u003e","published_at":"2019-10-31T11:07:17-04:00","created_at":"2019-10-31T09:43:25-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":2190,"price_min":2190,"price_max":2190,"available":true,"price_varies":false,"compare_at_price":2195,"compare_at_price_min":2195,"compare_at_price_max":2195,"compare_at_price_varies":false,"variants":[{"id":31071697797238,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K567","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun Benchtop Power Board Kit","public_title":null,"options":["Default Title"],"price":2190,"weight":0,"compare_at_price":2195,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"continue","barcode":"845156002894","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12867-01.jpg?v=1572529405"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12867-01.jpg?v=1572529405","options":["Title"],"media":[{"alt":null,"id":5516062294134,"position":1,"preview_image":{"aspect_ratio":1.0,"height":589,"width":589,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12867-01.jpg?v=1572529405"},"aspect_ratio":1.0,"height":589,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12867-01.jpg?v=1572529405","width":589}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eYou don’t have the power? Well, there’s no need to ask Scotty – the SparkFun Benchtop Power Board Kit has your back. This board will let you take advantage of your power supply to create a benchtop power supply with enough juice to run almost any of your embedded electronics projects.\u003c\/p\u003e\u003cp\u003eThe benchtop power board kit was created to provide quick access to the typical voltages needed when developing physical computing projects (embedded systems). After assembling the kit you'll have access to four different voltages (3.3V, 5V, 12V and -12V) each with their own replaceable 5A fuse. Each power rail has a corresponding ground connection; all of the power rails are brought out to a binding post. The benchtop power board should be powered by a standard computer power supply with an ATX connector. With this rev we have finally added a power switch and made each standoff to a more appropriate height to fit the mounting posts.\u003c\/p\u003e\u003cp\u003eThis kit is simple to put together and shouldn't take more than 30-45 minutes for a beginner.\u003c\/p\u003e"}

{"id":4357147852918,"title":"SparkFun Pro Micro - 3.3V\/8MHz","handle":"sparkfun-pro-micro-3-3v-8mhz","description":"\u003cp\u003eHere at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.\u003c\/p\u003e\u003cp\u003eThis tiny little board does all of the neat-o Arduino tricks that you're familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 8MHz and 3.3V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/p\u003e\u003cp\u003eThis is the 3.3V version so, as always, keep in mind the limits of system voltage and so forth. The lower system voltage also has its advantages, though, like ease of use with many common 3.3V sensors. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/p\u003e\u003cp\u003eNot sure which Arduino or Arduino-compatible board is right for you? Check out our \u003ca href=\"https:\/\/www.sparkfun.com\/arduino_guide\" target=\"_blank\"\u003eArduino Buying Guide\u003c\/a\u003e!\u003c\/p\u003e","published_at":"2020-03-30T13:35:20-04:00","created_at":"2019-11-26T17:28:19-05:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":1790,"price_min":1790,"price_max":1790,"available":true,"price_varies":false,"compare_at_price":1795,"compare_at_price_min":1795,"compare_at_price_max":1795,"compare_at_price_varies":false,"variants":[{"id":31261045260406,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K606","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun Pro Micro - 3.3V\/8MHz","public_title":null,"options":["Default Title"],"price":1790,"weight":0,"compare_at_price":1795,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12587-01b.jpg?v=1574807299"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12587-01b.jpg?v=1574807299","options":["Title"],"media":[{"alt":null,"id":5693306208374,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12587-01b.jpg?v=1574807299"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12587-01b.jpg?v=1574807299","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHere at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.\u003c\/p\u003e\u003cp\u003eThis tiny little board does all of the neat-o Arduino tricks that you're familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 8MHz and 3.3V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/p\u003e\u003cp\u003eThis is the 3.3V version so, as always, keep in mind the limits of system voltage and so forth. The lower system voltage also has its advantages, though, like ease of use with many common 3.3V sensors. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/p\u003e\u003cp\u003eNot sure which Arduino or Arduino-compatible board is right for you? Check out our \u003ca href=\"https:\/\/www.sparkfun.com\/arduino_guide\" target=\"_blank\"\u003eArduino Buying Guide\u003c\/a\u003e!\u003c\/p\u003e"}

{"id":4357146509430,"title":"SparkFun Thing Plus - SAMD51","handle":"sparkfun-thing-plus-samd51","description":"\u003cp\u003eIs it power you seek? With a 32-bit ARM Cortex-M4F MCU, the SparkFun SAMD51 Thing Plus is one of our most powerful microcontroller boards yet! The SAMD51 Thing Plus provides you with an economical and easy to use development platform if you're needing more power with minimal working space. This Thing even comes flashed with the same convenient UF2 bootloader as the RedBoard Turbo. To make the Thing Plus even easier to use, we've moved a few pins around to make the board Feather compatible and it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!\u003c\/p\u003e\u003cp\u003eThe ATSAMD51J20 utilizes a 32-bit ARM Cortex-M4 processor with Floating Point Unit (FPU), running up to 120MHz, up to 1MB of flash memory, up to 256KB of SRAM with ECC, up to 6 SERCOM interfaces, and other features. In addition to the USB interface and Qwiic connection, a The SAMD51 Thing Plus provides a 600mA 3.3V regulator and LiPo charger.\u003c\/p\u003e","published_at":"2020-02-12T16:53:52-05:00","created_at":"2019-11-26T17:24:41-05:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":1990,"price_min":1990,"price_max":1990,"available":true,"price_varies":false,"compare_at_price":1995,"compare_at_price_min":1995,"compare_at_price_max":1995,"compare_at_price_varies":false,"variants":[{"id":31261039919222,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K601","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun Thing Plus - SAMD51","public_title":null,"options":["Default Title"],"price":1990,"weight":0,"compare_at_price":1995,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14713-SparkFun_Thing_Plus_-_SAMD51-02.jpg?v=1574807081"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14713-SparkFun_Thing_Plus_-_SAMD51-02.jpg?v=1574807081","options":["Title"],"media":[{"alt":null,"id":5693292937334,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14713-SparkFun_Thing_Plus_-_SAMD51-02.jpg?v=1574807081"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14713-SparkFun_Thing_Plus_-_SAMD51-02.jpg?v=1574807081","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eIs it power you seek? With a 32-bit ARM Cortex-M4F MCU, the SparkFun SAMD51 Thing Plus is one of our most powerful microcontroller boards yet! The SAMD51 Thing Plus provides you with an economical and easy to use development platform if you're needing more power with minimal working space. This Thing even comes flashed with the same convenient UF2 bootloader as the RedBoard Turbo. To make the Thing Plus even easier to use, we've moved a few pins around to make the board Feather compatible and it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!\u003c\/p\u003e\u003cp\u003eThe ATSAMD51J20 utilizes a 32-bit ARM Cortex-M4 processor with Floating Point Unit (FPU), running up to 120MHz, up to 1MB of flash memory, up to 256KB of SRAM with ECC, up to 6 SERCOM interfaces, and other features. In addition to the USB interface and Qwiic connection, a The SAMD51 Thing Plus provides a 600mA 3.3V regulator and LiPo charger.\u003c\/p\u003e"}

{"id":4357145755766,"title":"SparkFun GPS Logger Shield","handle":"sparkfun-gps-logger-shield","description":"\u003cp\u003eThe SparkFun GPS Logger Shield equips your Arduino with access to a GPS module, µSD memory card socket, and all of the other peripherals you’ll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger. The shield is based around a GP3906-TLP GPS Module – a 66-channel GPS receiver featuring a MediaTek MT3339 architecture and up to a 10Hz update rate. The GPS module will stream constant position updates over a simple TTL-level serial port, which you can then log to a µSD card and\/or use for other purposes.\u003c\/p\u003e\u003cp\u003eEverything on the shield is highly configurable: A switch allows you to select the GPS module’s UART interface between either hardware or software ports, the µSD card operates over a hardware SPI port, which should be compatible with most Arduino layouts, and extra prototyping space should allow you to add those last, few components you need to complete your project. The GPS Logger Shield’s main voltage supply is taken from the Arduino 5V header pin. This voltage is regulated down to 3.3V, which is supplied to both the GPS module and the µSD card. These two components should consume, about 30mA on average, but they may very occasionally spike to around 100mA. We also highly recommend a 12mm Coin Cell Battery, which fits into the GPS Shield’s battery holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The shield does not come with headers installed; we recommend the Arduino Stackable Header Kit.\u003c\/p\u003e","published_at":"2020-02-12T16:20:24-05:00","created_at":"2019-11-26T17:22:33-05:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":4990,"price_min":4990,"price_max":4990,"available":true,"price_varies":false,"compare_at_price":4995,"compare_at_price_min":4995,"compare_at_price_max":4995,"compare_at_price_varies":false,"variants":[{"id":31261036380278,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K598","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun GPS Logger Shield","public_title":null,"options":["Default Title"],"price":4990,"weight":0,"compare_at_price":4995,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13750-02.jpg?v=1574806953"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13750-02.jpg?v=1574806953","options":["Title"],"media":[{"alt":null,"id":5693284450422,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13750-02.jpg?v=1574806953"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/13750-02.jpg?v=1574806953","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe SparkFun GPS Logger Shield equips your Arduino with access to a GPS module, µSD memory card socket, and all of the other peripherals you’ll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger. The shield is based around a GP3906-TLP GPS Module – a 66-channel GPS receiver featuring a MediaTek MT3339 architecture and up to a 10Hz update rate. The GPS module will stream constant position updates over a simple TTL-level serial port, which you can then log to a µSD card and\/or use for other purposes.\u003c\/p\u003e\u003cp\u003eEverything on the shield is highly configurable: A switch allows you to select the GPS module’s UART interface between either hardware or software ports, the µSD card operates over a hardware SPI port, which should be compatible with most Arduino layouts, and extra prototyping space should allow you to add those last, few components you need to complete your project. The GPS Logger Shield’s main voltage supply is taken from the Arduino 5V header pin. This voltage is regulated down to 3.3V, which is supplied to both the GPS module and the µSD card. These two components should consume, about 30mA on average, but they may very occasionally spike to around 100mA. We also highly recommend a 12mm Coin Cell Battery, which fits into the GPS Shield’s battery holder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The shield does not come with headers installed; we recommend the Arduino Stackable Header Kit.\u003c\/p\u003e"}

{"id":4330420043894,"title":"SparkFun Pro Micro - 5V\/16MHz","handle":"sparkfun-pro-micro-5v-16mhz","description":"\u003cp\u003eHere at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.\u003c\/p\u003e\u003cp\u003eThis tiny little board does all of the neat-o Arduino tricks that you're familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/p\u003e\u003cp\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.\u003c\/p\u003e\u003cp\u003eNot sure which Arduino or Arduino-compatible board is right for you? \u003c\/p\u003e","published_at":"2019-10-31T15:12:14-04:00","created_at":"2019-10-31T09:44:02-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":1990,"price_min":1990,"price_max":1990,"available":true,"price_varies":false,"compare_at_price":1995,"compare_at_price_min":1995,"compare_at_price_max":1995,"compare_at_price_varies":false,"variants":[{"id":31071699599478,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K579","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun Pro Micro - 5V\/16MHz","public_title":null,"options":["Default Title"],"price":1990,"weight":0,"compare_at_price":1995,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"continue","barcode":"845156004058","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12640-01a.jpg?v=1572529443"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12640-01a.jpg?v=1572529443","options":["Title"],"media":[{"alt":null,"id":5516066521206,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12640-01a.jpg?v=1572529443"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/12640-01a.jpg?v=1572529443","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eHere at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.\u003c\/p\u003e\u003cp\u003eThis tiny little board does all of the neat-o Arduino tricks that you're familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/p\u003e\u003cp\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.\u003c\/p\u003e\u003cp\u003eNot sure which Arduino or Arduino-compatible board is right for you? \u003c\/p\u003e"}

{"id":4330419257462,"title":"SparkFun Inventor's Kit for Arduino Uno - v4.0","handle":"sparkfun-inventors-kit-for-arduino-uno-v4-0","description":"\u003cp\u003eThe SparkFun Inventor's Kit (SIK) for Arduino Uno is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete five overarching projects consisting of 16 interconnected circuits that teach everything from blinking an LED to reading sensors. The culminating project is your very own autonomous robot! No previous programming or electronics experience is required to use this kit.\u003c\/p\u003e\u003cp\u003eThe \u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Kits\/SIK\/SIK_v4_Book_Oct_25_FINAL.pdf\" target=\"_blank\"\u003eonline guide\u003c\/a\u003e contains step-by-step instructions with circuit diagrams and hookup tables for building each project and circuit with the included parts. Full example code is provided, new concepts and components are explained at point of use, and troubleshooting tips offer assistance if something goes wrong.\u003c\/p\u003e\u003cp\u003eThe kit does not require any soldering and is recommended for beginners ages 10 and up who are looking for an Arduino starter kit. For SIK version 4.0 we took an entirely different approach to teaching embedded electronics. In previous versions of the SIK, each circuit focused on introducing a new piece of technology. With SIK v4.0, components are introduced in the context of the circuit you are building, and each circuit builds upon the last, leading up to a project that incorporates all of the components and concepts introduced throughout the guide. With new parts and a completely new strategy, even if you've used the SIK before, you're in for a brand-new experience!\u003c\/p\u003e\u003cp\u003eThis version of the SIK replaces the SparkFun RedBoard with the Arduino Uno (SMD version) and comes without the SIK guidebook and carrying case. With these components being swapped and removed, we were able to reduce the overall size and weight of the kit, making shipping cheaper and easier for anyone ordering internationally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e As stated above, this SIK does NOT include a carrying case or print guidebook.\u003c\/p\u003e\n\u003cdiv class=\"center-block text-center\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-inventors-kit-experiment-guide---v40\" class=\"btn btn-default\"\u003eGet Started With the SparkFun Inventor's Kit v4.0 Experiment Guide\u003c\/a\u003e \u003c\/div\u003e","published_at":"2019-10-31T11:32:31-04:00","created_at":"2019-10-31T09:43:41-04:00","vendor":"SparkFun","type":"SparkFun","tags":["Kit"],"price":9549,"price_min":9549,"price_max":9549,"available":false,"price_varies":false,"compare_at_price":10995,"compare_at_price_min":10995,"compare_at_price_max":10995,"compare_at_price_varies":false,"variants":[{"id":31071698583670,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K572","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"SparkFun Inventor's Kit for Arduino Uno - v4.0","public_title":null,"options":["Default Title"],"price":9549,"weight":0,"compare_at_price":10995,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"845156008339","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14418-SparkFun_Inventor_s_Kit_for_Arduino_Uno_-_v4.0-01.jpg?v=1572535205","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14418-02.jpg?v=1572535205"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14418-SparkFun_Inventor_s_Kit_for_Arduino_Uno_-_v4.0-01.jpg?v=1572535205","options":["Title"],"media":[{"alt":null,"id":5516592545910,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14418-SparkFun_Inventor_s_Kit_for_Arduino_Uno_-_v4.0-01.jpg?v=1572535202"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14418-SparkFun_Inventor_s_Kit_for_Arduino_Uno_-_v4.0-01.jpg?v=1572535202","width":600},{"alt":null,"id":5516064129142,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14418-02.jpg?v=1572529421"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/14418-02.jpg?v=1572529421","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe SparkFun Inventor's Kit (SIK) for Arduino Uno is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete five overarching projects consisting of 16 interconnected circuits that teach everything from blinking an LED to reading sensors. The culminating project is your very own autonomous robot! No previous programming or electronics experience is required to use this kit.\u003c\/p\u003e\u003cp\u003eThe \u003ca href=\"https:\/\/cdn.sparkfun.com\/datasheets\/Kits\/SIK\/SIK_v4_Book_Oct_25_FINAL.pdf\" target=\"_blank\"\u003eonline guide\u003c\/a\u003e contains step-by-step instructions with circuit diagrams and hookup tables for building each project and circuit with the included parts. Full example code is provided, new concepts and components are explained at point of use, and troubleshooting tips offer assistance if something goes wrong.\u003c\/p\u003e\u003cp\u003eThe kit does not require any soldering and is recommended for beginners ages 10 and up who are looking for an Arduino starter kit. For SIK version 4.0 we took an entirely different approach to teaching embedded electronics. In previous versions of the SIK, each circuit focused on introducing a new piece of technology. With SIK v4.0, components are introduced in the context of the circuit you are building, and each circuit builds upon the last, leading up to a project that incorporates all of the components and concepts introduced throughout the guide. With new parts and a completely new strategy, even if you've used the SIK before, you're in for a brand-new experience!\u003c\/p\u003e\u003cp\u003eThis version of the SIK replaces the SparkFun RedBoard with the Arduino Uno (SMD version) and comes without the SIK guidebook and carrying case. With these components being swapped and removed, we were able to reduce the overall size and weight of the kit, making shipping cheaper and easier for anyone ordering internationally.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e As stated above, this SIK does NOT include a carrying case or print guidebook.\u003c\/p\u003e\n\u003cdiv class=\"center-block text-center\"\u003e \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-inventors-kit-experiment-guide---v40\" class=\"btn btn-default\"\u003eGet Started With the SparkFun Inventor's Kit v4.0 Experiment Guide\u003c\/a\u003e \u003c\/div\u003e"}

{"id":4330418733174,"title":"SparkFun Simon Says - Through-Hole Soldering Kit","handle":"sparkfun-simon-says-through-hole-soldering-kit","description":"\u003cp\u003eThis is the latest version of our popular through-hole Simon Says Kit. We've made some changes to the board that should make it easier than ever for the beginner to build! All components are through-hole, making this kit a great place to start when you're learning to solder. When building this kit, you'll have a chance to solder a 28-pin microprocessor, LEDs, battery clips and more.\u003c\/p\u003e\u003cp\u003eAfter you have successfully assembled the kit, you will have a greater knowledge of through-hole soldering and the tools, techniques, and terminology required to populate your own PCB prototype. You will have a development platform with 5 outputs (LEDs and buzzer), 5 inputs (buttons), and serial for debugging. And, of course, you'll have your very own Simon game!\u003c\/p\u003e\u003cp\u003eCheckout the assembly instructions - we're pretty proud of them. The kit even includes batteries! Assembly time varies, but for a true beginner with no soldering experience, the kit can take 20-40 minutes to assemble.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/simon-says-assembly-guide\" target=\"_blank\"\u003eGet Started with the Simon Says Assembly Guide\u003c\/a\u003e\u003c\/p\u003e","published_at":"2019-10-31T11:09:54-04:00","created_at":"2019-10-31T09:43:28-04:00","vendor":"SparkFun","type":"SparkFun","tags":[],"price":2295,"price_min":2295,"price_max":2295,"available":true,"price_varies":false,"compare_at_price":2695,"compare_at_price_min":2695,"compare_at_price_max":2695,"compare_at_price_varies":false,"variants":[{"id":31071697928310,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K568","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"SparkFun Simon Says - Through-Hole Soldering Kit","public_title":null,"options":["Default Title"],"price":2295,"weight":0,"compare_at_price":2695,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"continue","barcode":"845156003709","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/10547-SparkFun_Simon_Says_-_Through-Hole_Soldering_Kit-01.jpg?v=1572529408","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/Simon.gif?v=1572534749"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/10547-SparkFun_Simon_Says_-_Through-Hole_Soldering_Kit-01.jpg?v=1572529408","options":["Title"],"media":[{"alt":null,"id":5516062654582,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/10547-SparkFun_Simon_Says_-_Through-Hole_Soldering_Kit-01.jpg?v=1572529408"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/10547-SparkFun_Simon_Says_-_Through-Hole_Soldering_Kit-01.jpg?v=1572529408","width":600},{"alt":null,"id":5516548800630,"position":2,"preview_image":{"aspect_ratio":1.0,"height":480,"width":480,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/Simon.gif?v=1572534749"},"aspect_ratio":1.0,"height":480,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/Simon.gif?v=1572534749","width":480}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is the latest version of our popular through-hole Simon Says Kit. We've made some changes to the board that should make it easier than ever for the beginner to build! All components are through-hole, making this kit a great place to start when you're learning to solder. When building this kit, you'll have a chance to solder a 28-pin microprocessor, LEDs, battery clips and more.\u003c\/p\u003e\u003cp\u003eAfter you have successfully assembled the kit, you will have a greater knowledge of through-hole soldering and the tools, techniques, and terminology required to populate your own PCB prototype. You will have a development platform with 5 outputs (LEDs and buzzer), 5 inputs (buttons), and serial for debugging. And, of course, you'll have your very own Simon game!\u003c\/p\u003e\u003cp\u003eCheckout the assembly instructions - we're pretty proud of them. The kit even includes batteries! Assembly time varies, but for a true beginner with no soldering experience, the kit can take 20-40 minutes to assemble.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/simon-says-assembly-guide\" target=\"_blank\"\u003eGet Started with the Simon Says Assembly Guide\u003c\/a\u003e\u003c\/p\u003e"}