Arduino

Arduino is an open-source electronics platform based on easy-to-use hardware and software. It's intended for anyone making interactive projects.

Arduino

Sort by:
Sold Out
Arduino Ethernet Shield 2 without POE
{"id":8608170824,"title":"Arduino Ethernet Shield 2 without POE","handle":"arduino-ethernet-shield-2-without-poe","description":"\u003cdiv\u003eThe Arduino Ethernet Shield 2 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino Board, connect it to your network with an \u003cspan class=\"wikiword\"\u003eRJ45\u003c\/span\u003e cable (not included) and follow a few simple steps to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eThe Shield does not come with a built in \u003c\/span\u003e\u003cspan class=\"wikiword\"\u003ePoE\u003c\/span\u003e\u003cspan\u003e module, it is a separate component that must be added on. Arduino communicates with both the W5500 and SD card using the SPI bus (through the ICSP header). This is on digital pins 10, 11, 12, and 13 on the Uno and pins 50, 51, and 52 on the Mega. On both boards, pin 10 is used to select the W5500 and pin 4 for the SD card. These pins cannot be used for general I\/O. On the Mega, the hardware SS pin, 53, is not used to select either the W5500 or the SD card, but it must be kept as an output or the SPI interface won't work.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNote that because the W5500 and SD card share the SPI bus, only one at a time can be active. If you are using both peripherals in your program, this should be taken care of by the corresponding libraries. If you're not using one of the peripherals in your program, however, you'll need to explicitly deselect it. To do this with the SD card, set pin 4 as an output and write a high to it. For the W5500, set digital pin 10 as a high output.\u003c\/span\u003e\u003c\/div\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:42-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Ethernet","Internet Connection"],"price":2360,"price_min":2360,"price_max":2360,"available":false,"price_varies":false,"compare_at_price":2365,"compare_at_price_min":2365,"compare_at_price_max":2365,"compare_at_price_varies":false,"variants":[{"id":29778533512,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AX-BFGU-Z8GN","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Arduino Ethernet Shield 2 without POE","public_title":null,"options":["Default Title"],"price":2360,"weight":0,"compare_at_price":2365,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"A000024"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000024-Arduino-Eth-Shield-2-1front.jpg?v=1486778011","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000024-Arduino-Eth-Shield-2-3tri.jpg?v=1486778011","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000024-Arduino-Eth-Shield-2-2back.jpg?v=1486778016"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000024-Arduino-Eth-Shield-2-1front.jpg?v=1486778011","options":["Title"],"content":"\u003cdiv\u003eThe Arduino Ethernet Shield 2 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino Board, connect it to your network with an \u003cspan class=\"wikiword\"\u003eRJ45\u003c\/span\u003e cable (not included) and follow a few simple steps to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, software and documentation – is freely available and open-source. \u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eThe Shield does not come with a built in \u003c\/span\u003e\u003cspan class=\"wikiword\"\u003ePoE\u003c\/span\u003e\u003cspan\u003e module, it is a separate component that must be added on. Arduino communicates with both the W5500 and SD card using the SPI bus (through the ICSP header). This is on digital pins 10, 11, 12, and 13 on the Uno and pins 50, 51, and 52 on the Mega. On both boards, pin 10 is used to select the W5500 and pin 4 for the SD card. These pins cannot be used for general I\/O. On the Mega, the hardware SS pin, 53, is not used to select either the W5500 or the SD card, but it must be kept as an output or the SPI interface won't work.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eNote that because the W5500 and SD card share the SPI bus, only one at a time can be active. If you are using both peripherals in your program, this should be taken care of by the corresponding libraries. If you're not using one of the peripherals in your program, however, you'll need to explicitly deselect it. To do this with the SD card, set pin 4 as an output and write a high to it. For the W5500, set digital pin 10 as a high output.\u003c\/span\u003e\u003c\/div\u003e"}
Arduino Ethernet Shield 2 without POE

Arduino Ethernet Shield 2 without POE

$23.60

The Arduino Ethernet Shield 2 connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your world through the internet. As always with Arduino, every element of the platform – hardware, soft...


More Info
Sold Out
Arduino GSM Shield 2 with Integrated Antenna
{"id":8608170888,"title":"Arduino GSM Shield 2 with Integrated Antenna","handle":"arduino-gsm-shield-2-with-integrated-antenna","description":"\u003cp\u003e\u003cspan\u003eThe Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an \u003c\/span\u003e\u003cspan\u003eoperator offering GPRS coverage and start controlling your world through the internet. You can also make\/receive voice calls (with an external speaker and microphone circuit) and send\/receive SMS messages.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:43-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Internet Connection","Wireless"],"price":7150,"price_min":7150,"price_max":7150,"available":false,"price_varies":false,"compare_at_price":7105,"compare_at_price_min":7105,"compare_at_price_max":7105,"compare_at_price_varies":false,"variants":[{"id":29778533576,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"67-ZM9T-TZJ2","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Arduino GSM Shield 2 with Integrated Antenna","public_title":null,"options":["Default Title"],"price":7150,"weight":0,"compare_at_price":7105,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"A000105"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000105-Arduino-GSM-Shield-2-IA-1front.jpg?v=1486779955","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000105-Arduino-GSM-Shield-2-IA-2back.jpg?v=1486779955","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000105-Arduino-GSM-Shield-2-IA-3tri.jpg?v=1486779955"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000105-Arduino-GSM-Shield-2-IA-1front.jpg?v=1486779955","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eThe Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an \u003c\/span\u003e\u003cspan\u003eoperator offering GPRS coverage and start controlling your world through the internet. You can also make\/receive voice calls (with an external speaker and microphone circuit) and send\/receive SMS messages.\u003c\/span\u003e\u003c\/p\u003e"}
Arduino GSM Shield 2 with Integrated Antenna

Arduino GSM Shield 2 with Integrated Antenna

$71.50

The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and start controlling your world through the internet. You can also make/receive voice calls (with an external speaker and microphone circuit) and ...


More Info
Sold Out
Arduino ISP
Arduino ISP
$12.95
{"id":8608170952,"title":"Arduino ISP","handle":"arduino-isp","description":"\u003cp\u003e\u003cspan\u003eThe Arduino ISP is a tiny AVR-ISP (in-system programmer)\u003c\/span\u003e\u003cspan\u003e. With this programmer you can upload sketches and burn the bootloader on any AVR based boards, including Arduinos. By\u003c\/span\u003e\u003cspan\u003e uploading a sketch with an external programmer you can remove the bootloader and use the extra space for your sketch. The Arduino ISP can also be used to burn the Arduino bootloader, so you can recover your chip if you accidentally corrupt the bootloader. Burning the bootloader is also necessary when you use a new \u003c\/span\u003e\u003cspan class=\"wikiword\"\u003eATmega\u003c\/span\u003e\u003cspan\u003e microcontroller in your Arduino, and you wish to use the bootloader to upload a sketch via the USB-Serial connection\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:43-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Bootloader","In-System Programmer"],"price":1295,"price_min":1295,"price_max":1295,"available":false,"price_varies":false,"compare_at_price":1320,"compare_at_price_min":1320,"compare_at_price_max":1320,"compare_at_price_varies":false,"variants":[{"id":29778533640,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"LH-Y1YQ-9FOC","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Arduino ISP","public_title":null,"options":["Default Title"],"price":1295,"weight":0,"compare_at_price":1320,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"A000092"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000092-Arduino-ISP-1front.jpg?v=1486778284","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000092-Arduino-ISP-2back.jpg?v=1486778285","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000092-Arduino-ISP-3tri.jpg?v=1486778285"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000092-Arduino-ISP-1front.jpg?v=1486778284","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eThe Arduino ISP is a tiny AVR-ISP (in-system programmer)\u003c\/span\u003e\u003cspan\u003e. With this programmer you can upload sketches and burn the bootloader on any AVR based boards, including Arduinos. By\u003c\/span\u003e\u003cspan\u003e uploading a sketch with an external programmer you can remove the bootloader and use the extra space for your sketch. The Arduino ISP can also be used to burn the Arduino bootloader, so you can recover your chip if you accidentally corrupt the bootloader. Burning the bootloader is also necessary when you use a new \u003c\/span\u003e\u003cspan class=\"wikiword\"\u003eATmega\u003c\/span\u003e\u003cspan\u003e microcontroller in your Arduino, and you wish to use the bootloader to upload a sketch via the USB-Serial connection\u003c\/span\u003e\u003c\/p\u003e"}
Arduino ISP

Arduino ISP

$12.95

The Arduino ISP is a tiny AVR-ISP (in-system programmer). With this programmer you can upload sketches and burn the bootloader on any AVR based boards, including Arduinos. By uploading a sketch with an external programmer you can remove the bootloader and use the extra space for your sketch. The Arduino ISP can also be used to burn the Arduino b...


More Info
Sold Out
Arduino 9 Axes Motion Shield
{"id":8608173768,"title":"Arduino 9 Axes Motion Shield","handle":"arduino-9-axes-sensor-shield","description":"\u003cp\u003eThe Arduino 9 Axes Motion Shield allows your Arduino to measure movement in terms of orientation, acceleration, and magnetic field. It is based on the BNO055 absolute orientation sensor from Bosch Sensortec GmbH. \u003c\/p\u003e\n\u003cdiv\u003eThe BNO055 is a System in Package (SiP), integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 degrees per second, a triaxial geomagnetic sensor and a 32-bit microcontroller running the BSX3.0 FusionLib software. \u003c\/div\u003e\n\u003cdiv\u003eThe sensor features three-dimensional acceleration, yaw rate and magnetic field strength data each in 3 perpendicular axes. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIt also provides the sensor fusion signals such as: \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e• Quaternion\u003c\/li\u003e\n\u003cli\u003e• Euler angles\u003c\/li\u003e\n\u003cli\u003e• Rotation vector\u003c\/li\u003e\n\u003cli\u003e• Linear acceleration\u003c\/li\u003e\n\u003cli\u003e• Gravity vector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition, it incorporates an intelligent interrupt engine, which allows for triggering interrupts based on slow or no motion recognition, any motion (slope) detection, and high-g-detection. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:49-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Accelerometer","Shield"],"price":2885,"price_min":2885,"price_max":2885,"available":false,"price_varies":false,"compare_at_price":2895,"compare_at_price_min":2895,"compare_at_price_max":2895,"compare_at_price_varies":false,"variants":[{"id":29778536456,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2PX-P9X-GE4","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Arduino 9 Axes Motion Shield","public_title":null,"options":["Default Title"],"price":2885,"weight":0,"compare_at_price":2895,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"A000070"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000070-Arduino-9-Axes-Motion-Shield-1front.jpg?v=1486777590","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000070-Arduino-9-Axes-Motion-Shield-2back.jpg?v=1486777591","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000070-Arduino-9-Axes-Motion-Shield-3tri.jpg?v=1486777592"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000070-Arduino-9-Axes-Motion-Shield-1front.jpg?v=1486777590","options":["Title"],"content":"\u003cp\u003eThe Arduino 9 Axes Motion Shield allows your Arduino to measure movement in terms of orientation, acceleration, and magnetic field. It is based on the BNO055 absolute orientation sensor from Bosch Sensortec GmbH. \u003c\/p\u003e\n\u003cdiv\u003eThe BNO055 is a System in Package (SiP), integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 degrees per second, a triaxial geomagnetic sensor and a 32-bit microcontroller running the BSX3.0 FusionLib software. \u003c\/div\u003e\n\u003cdiv\u003eThe sensor features three-dimensional acceleration, yaw rate and magnetic field strength data each in 3 perpendicular axes. \u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003eIt also provides the sensor fusion signals such as: \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e• Quaternion\u003c\/li\u003e\n\u003cli\u003e• Euler angles\u003c\/li\u003e\n\u003cli\u003e• Rotation vector\u003c\/li\u003e\n\u003cli\u003e• Linear acceleration\u003c\/li\u003e\n\u003cli\u003e• Gravity vector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eIn addition, it incorporates an intelligent interrupt engine, which allows for triggering interrupts based on slow or no motion recognition, any motion (slope) detection, and high-g-detection. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e"}
Arduino 9 Axes Motion Shield

Arduino 9 Axes Motion Shield

$28.85

The Arduino 9 Axes Motion Shield allows your Arduino to measure movement in terms of orientation, acceleration, and magnetic field. It is based on the BNO055 absolute orientation sensor from Bosch Sensortec GmbH.  The BNO055 is a System in Package (SiP), integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±20...


More Info
Sale
Arduino Due
Arduino Due
$46.95 $47.50
{"id":8608170696,"title":"Arduino Due","handle":"arduino-due","description":"\u003cdiv\u003eThe Arduino Due is a microcontroller board. It is the first Arduino board based on a 32-bit ARM core microcontroller. Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I\/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I\/O pin could damage the board.\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:42-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Microcontroller"],"price":4695,"price_min":4695,"price_max":4695,"available":true,"price_varies":false,"compare_at_price":4750,"compare_at_price_min":4750,"compare_at_price_max":4750,"compare_at_price_varies":false,"variants":[{"id":29778533320,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"22-1L7B-YE65","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Arduino Due","public_title":null,"options":["Default Title"],"price":4695,"weight":0,"compare_at_price":4750,"inventory_quantity":51,"inventory_management":"shopify","inventory_policy":"deny","barcode":"A000062"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000062-Arduino-Due-1front.jpg?v=1486777733","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000062-Arduino-Due-2tri.jpg?v=1486777733"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000062-Arduino-Due-1front.jpg?v=1486777733","options":["Title"],"content":"\u003cdiv\u003eThe Arduino Due is a microcontroller board. It is the first Arduino board based on a 32-bit ARM core microcontroller. Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I\/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I\/O pin could damage the board.\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e"}
Arduino Due

Arduino Due

$46.95

The Arduino Due is a microcontroller board. It is the first Arduino board based on a 32-bit ARM core microcontroller. Unlike most Arduino boards, the Arduino Due board runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board. The board contains everything ...


More Info
Sold Out
Arduino Leonardo ETH without POE
{"id":8608171016,"title":"Arduino Leonardo ETH without POE","handle":"arduino-leonardo-eth-without-poe","description":"\u003cp\u003e\u003cspan\u003eThe Leonardo ETH is a microcontroller board based on the ATmega32U4 and the new W5500 TCP\/IP Embedded Ethernet Controller. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eThe Leonardo ETH differs from the preceding Ethernet board in that the ATmega32u4 has built-in USB communication, eliminating the need for an external USB-to-serial converter. This allows the Leonardo ETH to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial \/ COM port. It also has other implications for the behaviour of the board. Plus, it has the new W5500 TCP\/IP Embedded Ethernet Controller onboard. \u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:43-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Microcontroller"],"price":4350,"price_min":4350,"price_max":4350,"available":false,"price_varies":false,"compare_at_price":4389,"compare_at_price_min":4389,"compare_at_price_max":4389,"compare_at_price_varies":false,"variants":[{"id":29778533704,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3K-1Q4E-4J7W","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Arduino Leonardo ETH without POE","public_title":null,"options":["Default Title"],"price":4350,"weight":0,"compare_at_price":4389,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"A000022"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000022-Arduino-Leonardo-ETH-1front.jpg?v=1489170347","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000022-Arduino-Leonardo-ETH-3tri.jpg?v=1489170347"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000022-Arduino-Leonardo-ETH-1front.jpg?v=1489170347","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eThe Leonardo ETH is a microcontroller board based on the ATmega32U4 and the new W5500 TCP\/IP Embedded Ethernet Controller. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003eThe Leonardo ETH differs from the preceding Ethernet board in that the ATmega32u4 has built-in USB communication, eliminating the need for an external USB-to-serial converter. This allows the Leonardo ETH to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial \/ COM port. It also has other implications for the behaviour of the board. Plus, it has the new W5500 TCP\/IP Embedded Ethernet Controller onboard. \u003c\/span\u003e\u003c\/p\u003e"}
Arduino Leonardo ETH without POE

Arduino Leonardo ETH without POE

$43.50

The Leonardo ETH is a microcontroller board based on the ATmega32U4 and the new W5500 TCP/IP Embedded Ethernet Controller. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Leonardo ETH differs from the preceding Ether...


More Info
Arduino M0
$24.00
{"id":8608171080,"title":"Arduino M0","handle":"arduino-m0","description":"\u003cp\u003eWith the new Arduino M0 board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers.\u003c\/p\u003e\n\u003cp\u003eThe Arduino M0 represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core.\u003c\/p\u003e\n\u003cp\u003eWith the addition of the M0 board, the Arduino family becomes larger with a new member providing increased performance. \u003c\/p\u003e\n\u003cp\u003eThe power of its Atmel’s core gives this board an upgraded flexibility and boosts the scope of projects one can think of and make; moreover, it makes the M0 the ideal educational tool for learning about 32-bit application development. \u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:43-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Microcontroller"],"price":2400,"price_min":2400,"price_max":2400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29778533768,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"35-U3VD-Y3H0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Arduino M0","public_title":null,"options":["Default Title"],"price":2400,"weight":0,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"A000103"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000103-Arduino-M0-1flat.jpg?v=1486779601","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000103-Arduino-M0-2back.jpg?v=1486779602"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000103-Arduino-M0-1flat.jpg?v=1486779601","options":["Title"],"content":"\u003cp\u003eWith the new Arduino M0 board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers.\u003c\/p\u003e\n\u003cp\u003eThe Arduino M0 represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core.\u003c\/p\u003e\n\u003cp\u003eWith the addition of the M0 board, the Arduino family becomes larger with a new member providing increased performance. \u003c\/p\u003e\n\u003cp\u003eThe power of its Atmel’s core gives this board an upgraded flexibility and boosts the scope of projects one can think of and make; moreover, it makes the M0 the ideal educational tool for learning about 32-bit application development. \u003c\/p\u003e"}
Arduino M0

Arduino M0

$24.00

With the new Arduino M0 board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers. The Arduino M0 represents a simple, yet powerful, 32-bit extension of the Ard...


More Info
Sale
Arduino Mega 2560
Arduino Mega 2560
$45.90 $45.95
{"id":8608171144,"title":"Arduino Mega 2560","handle":"arduino-mega-2560","description":"\u003cp\u003e\u003cspan\u003eThe Arduino Mega 2560 is a microcontroller board that has been designed with bigger and more ambitious projects in mind. The large number of analog and digital pins, together with a larger memory makes it ideal for devices like 3D printers and other demanding applications. Backward compatibility with existing shields and sketches is provided, but other shields target the Mega specifically, exploiting the full potential of this board. It \u003c\/span\u003ecan be powered via the USB connection or with an external power supply. The power source is selected automatically.\u003c\/p\u003e\n\u003cdiv\u003eExternal (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector.\u003c\/div\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:43-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Bootloader","Microcontroller"],"price":4590,"price_min":4590,"price_max":4590,"available":true,"price_varies":false,"compare_at_price":4595,"compare_at_price_min":4595,"compare_at_price_max":4595,"compare_at_price_varies":false,"variants":[{"id":29778533832,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EV-RSPN-RLXB","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Arduino Mega 2560","public_title":null,"options":["Default Title"],"price":4590,"weight":0,"compare_at_price":4595,"inventory_quantity":87,"inventory_management":"shopify","inventory_policy":"deny","barcode":"A000067"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000067-Arduino-Mega-2560-1front.jpg?v=1486780254","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000067-Arduino-Mega-2560-2back.jpg?v=1486780255","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000067-Arduino-Mega-2560-3tri.jpg?v=1486780256"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000067-Arduino-Mega-2560-1front.jpg?v=1486780254","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eThe Arduino Mega 2560 is a microcontroller board that has been designed with bigger and more ambitious projects in mind. The large number of analog and digital pins, together with a larger memory makes it ideal for devices like 3D printers and other demanding applications. Backward compatibility with existing shields and sketches is provided, but other shields target the Mega specifically, exploiting the full potential of this board. It \u003c\/span\u003ecan be powered via the USB connection or with an external power supply. The power source is selected automatically.\u003c\/p\u003e\n\u003cdiv\u003eExternal (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector.\u003c\/div\u003e"}
Arduino Mega 2560

Arduino Mega 2560

$45.90

The Arduino Mega 2560 is a microcontroller board that has been designed with bigger and more ambitious projects in mind. The large number of analog and digital pins, together with a larger memory makes it ideal for devices like 3D printers and other demanding applications. Backward compatibility with existing shields and sketches is provided, b...


More Info
Sale
Arduino Motor Shield
Arduino Motor Shield
$21.95 $22.00
{"id":8608171208,"title":"Arduino Motor Shield","handle":"arduino-motor-shield","description":"\u003cp\u003e\u003cspan\u003eThe Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as DC and stepping motors, relays and solenoids. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Arduino Motor Shield must be powered only by an external power supply. Because the L298 IC mounted on the shield has two separate power connections, one for the logic and one for the motor supply driver. The required motor current often exceeds the maximum USB current rating.\u003c\/p\u003e\n\u003cp\u003eExternal (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the Arduino's board power jack on which the motor shield is mounted or by connecting the wires that lead the power supply to the Vin and GND screw terminals, taking care to respect the polarities.\u003c\/p\u003e\n\u003cp\u003eTo avoid possible damage to the Arduino board on which the shield is mounted, we reccomend using an external power supply that provides a voltage between 7 and 12V. If your motor require more than 9V we recommend that you separate the power lines of the shield and the Arduino board on which the shield is mounted. This is possible by cutting the \"Vin Connect\" jumper placed on the back side of the shield. The absolute limit for the Vin at the screw terminals is 18V.\u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:44-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Driver","Shield"],"price":2195,"price_min":2195,"price_max":2195,"available":true,"price_varies":false,"compare_at_price":2200,"compare_at_price_min":2200,"compare_at_price_max":2200,"compare_at_price_varies":false,"variants":[{"id":29778533896,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"00-UZT4-ILI2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Arduino Motor Shield","public_title":null,"options":["Default Title"],"price":2195,"weight":0,"compare_at_price":2200,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"A000079"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000079-Arduino-Motor-Shield-1front.jpg?v=1486780373","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000079-Arduino-Motor-Shield-2back.jpg?v=1486780374","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000079-Arduino-Motor-Shield-3tri.jpg?v=1486780375"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000079-Arduino-Motor-Shield-1front.jpg?v=1486780373","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eThe Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as DC and stepping motors, relays and solenoids. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Arduino Motor Shield must be powered only by an external power supply. Because the L298 IC mounted on the shield has two separate power connections, one for the logic and one for the motor supply driver. The required motor current often exceeds the maximum USB current rating.\u003c\/p\u003e\n\u003cp\u003eExternal (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the Arduino's board power jack on which the motor shield is mounted or by connecting the wires that lead the power supply to the Vin and GND screw terminals, taking care to respect the polarities.\u003c\/p\u003e\n\u003cp\u003eTo avoid possible damage to the Arduino board on which the shield is mounted, we reccomend using an external power supply that provides a voltage between 7 and 12V. If your motor require more than 9V we recommend that you separate the power lines of the shield and the Arduino board on which the shield is mounted. This is possible by cutting the \"Vin Connect\" jumper placed on the back side of the shield. The absolute limit for the Vin at the screw terminals is 18V.\u003c\/p\u003e"}
Arduino Motor Shield

Arduino Motor Shield

$21.95

The Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as DC and stepping motors, relays and solenoids. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently. You can also measure the motor current absorption of each...


More Info
Sold Out
Arduino Starter Kit
{"id":8608171272,"title":"Arduino Starter Kit","handle":"arduino-starter-kit","description":"\u003cp\u003e\u003cspan\u003eThis kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe board in this starter kit is an \u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/arduino-uno-r3\" target=\"_blank\"\u003eArduino Uno\u003c\/a\u003e, which we have the R3 in stock separately. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 15 projects in the kit include: an introduction to the concepts you'll need to use this kit, design to control panels for a star ship, create a musical instrument you play by waving your hands, and many other exciting projects to become a master at using your Arduino\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll the projects included in the Arduino Starter Kit can be built without soldering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/pnf8ojsK6S4\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:44-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Kit"],"price":8895,"price_min":8895,"price_max":8895,"available":false,"price_varies":false,"compare_at_price":9995,"compare_at_price_min":9995,"compare_at_price_max":9995,"compare_at_price_varies":false,"variants":[{"id":29778533960,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"M2-TJZQ-J3AN","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Arduino Starter Kit","public_title":null,"options":["Default Title"],"price":8895,"weight":0,"compare_at_price":9995,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"K000007"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/K000007-Arduino-Starter-Kit-English.jpg?v=1488349051","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/K020007-Arduino-Starter-Kit-French3.jpg?v=1488349051"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/K000007-Arduino-Starter-Kit-English.jpg?v=1488349051","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eThis kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe board in this starter kit is an \u003ca href=\"https:\/\/kjdelectronics.myshopify.com\/products\/arduino-uno-r3\" target=\"_blank\"\u003eArduino Uno\u003c\/a\u003e, which we have the R3 in stock separately. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 15 projects in the kit include: an introduction to the concepts you'll need to use this kit, design to control panels for a star ship, create a musical instrument you play by waving your hands, and many other exciting projects to become a master at using your Arduino\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll the projects included in the Arduino Starter Kit can be built without soldering.\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/pnf8ojsK6S4\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e"}
Arduino Starter Kit

Arduino Starter Kit

$88.95

This kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects. The kit includes a selection of the most common and useful electronic components with a book of 15 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physica...


More Info
Sold Out
Arduino Uno R3
{"id":8608171336,"title":"Arduino Uno R3","handle":"arduino-uno-r3","description":"\u003cp\u003e\u003cspan\u003eArduino Uno is the ideal board for getting started with electronics, through fun and engaging hands-on projects. This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs. Arduino Uno Rev3 is the most used and documented board in the Arduino family. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eArduino Uno Rev3  is a microcontroller board based on the ATmega328P. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/pnf8ojsK6S4\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eThe Uno board is the first in a series of USB boards and it is the reference model for the Arduino platform. \u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:44-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Boards","Microcontroller"],"price":2490,"price_min":2490,"price_max":2490,"available":false,"price_varies":false,"compare_at_price":2495,"compare_at_price_min":2495,"compare_at_price_max":2495,"compare_at_price_varies":false,"variants":[{"id":29778534024,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"8H-8L2U-D01Q","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Arduino Uno R3","public_title":null,"options":["Default Title"],"price":2490,"weight":0,"compare_at_price":2495,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"A000066"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000066-Arduino-Uno-TH-1front.jpg?v=1488491006","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000066-Arduino-Uno-TH-2tri.jpg?v=1488491006"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000066-Arduino-Uno-TH-1front.jpg?v=1488491006","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eArduino Uno is the ideal board for getting started with electronics, through fun and engaging hands-on projects. This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs. Arduino Uno Rev3 is the most used and documented board in the Arduino family. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eArduino Uno Rev3  is a microcontroller board based on the ATmega328P. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/pnf8ojsK6S4\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eThe Uno board is the first in a series of USB boards and it is the reference model for the Arduino platform. \u003c\/span\u003e\u003c\/p\u003e"}
Arduino Uno R3

Arduino Uno R3

$24.90

Arduino Uno is the ideal board for getting started with electronics, through fun and engaging hands-on projects. This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs. Arduino Uno Rev3 is the most used and documented board...


More Info
Sold Out
Arduino Yun Mini
{"id":8608171464,"title":"Arduino Yun Mini","handle":"arduino-yun-mini","description":"\u003cp\u003eArduino Yun Mini is a breadboard PCB developed with ATmega 32u4 MCU and QCA MIPS 24K SoC CPU operating up to 400 MHz. Qualcomm Atheros CPU supports a Linux distribution based on OpenWRT named Linino.\u003c\/p\u003e\n\u003cp\u003eThe Arduino Yún Mini is similar to the Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Arduino Yún Mini to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial \/ COM.\u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:44-05:00","vendor":"kjdElectronics","type":"Arduino","tags":["Breadboard","WiFi"],"price":6105,"price_min":6105,"price_max":6105,"available":false,"price_varies":false,"compare_at_price":6160,"compare_at_price_min":6160,"compare_at_price_max":6160,"compare_at_price_varies":false,"variants":[{"id":29778534152,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"NQ-KOK1-SG7U","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Arduino Yun Mini","public_title":null,"options":["Default Title"],"price":6105,"weight":0,"compare_at_price":6160,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"A000108"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000108-Arduino_Yun_Mini_1front.jpg?v=1486780756","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000108-Arduino_Yun_Mini-2tri.jpg?v=1486780785"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/A000108-Arduino_Yun_Mini_1front.jpg?v=1486780756","options":["Title"],"content":"\u003cp\u003eArduino Yun Mini is a breadboard PCB developed with ATmega 32u4 MCU and QCA MIPS 24K SoC CPU operating up to 400 MHz. Qualcomm Atheros CPU supports a Linux distribution based on OpenWRT named Linino.\u003c\/p\u003e\n\u003cp\u003eThe Arduino Yún Mini is similar to the Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Arduino Yún Mini to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial \/ COM.\u003c\/p\u003e"}
Arduino Yun Mini

Arduino Yun Mini

$61.05

Arduino Yun Mini is a breadboard PCB developed with ATmega 32u4 MCU and QCA MIPS 24K SoC CPU operating up to 400 MHz. Qualcomm Atheros CPU supports a Linux distribution based on OpenWRT named Linino. The Arduino Yún Mini is similar to the Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary process...


More Info