Adafruit

{"id":8861030216,"title":"Flex Cable for Raspberry Pi Camera - 24\" \/ 610mm","handle":"flex-cable-for-raspberry-pi-camera-24-610mm","description":"\u003cp\u003eThis cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.\u003cbr\u003e\u003cbr\u003eThis cable is 24\" \/ 610mm long We have cables in \u003ca href=\"https:\/\/kjdelectronics.com\/products\/flex-csi-cable-for-raspberry-pi-camera-100mm-4\" target=\"_blank\"\u003e100mm\u003c\/a\u003e and \u003ca href=\"https:\/\/kjdelectronics.com\/products\/flex-csi-cable-for-raspberry-pi-camera-300mm-12\" target=\"_blank\"\u003e300mm\u003c\/a\u003e long so you can have the perfect fit. Each order comes with one cable, and the camera is not included.\u003c\/p\u003e","published_at":"2017-04-06T16:50:00-04:00","created_at":"2017-03-06T21:01:22-05:00","vendor":"Adafruit","type":"Adafruit","tags":["Cable"],"price":895,"price_min":895,"price_max":895,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31547910344,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K62","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Flex Cable for Raspberry Pi Camera - 24\" \/ 610mm","public_title":null,"options":["Default Title"],"price":895,"weight":0,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1731-02.jpg?v=1491511561","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1731-03.jpg?v=1491511563","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1731-00.jpg?v=1491511564"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1731-02.jpg?v=1491511561","options":["Title"],"media":[{"alt":null,"id":414741987363,"position":1,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1731-02.jpg?v=1491511561"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1731-02.jpg?v=1491511561","width":1200},{"alt":null,"id":414742020131,"position":2,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1731-03.jpg?v=1491511563"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1731-03.jpg?v=1491511563","width":1200},{"alt":null,"id":414742052899,"position":3,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1731-00.jpg?v=1491511564"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1731-00.jpg?v=1491511564","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.\u003cbr\u003e\u003cbr\u003eThis cable is 24\" \/ 610mm long We have cables in \u003ca href=\"https:\/\/kjdelectronics.com\/products\/flex-csi-cable-for-raspberry-pi-camera-100mm-4\" target=\"_blank\"\u003e100mm\u003c\/a\u003e and \u003ca href=\"https:\/\/kjdelectronics.com\/products\/flex-csi-cable-for-raspberry-pi-camera-300mm-12\" target=\"_blank\"\u003e300mm\u003c\/a\u003e long so you can have the perfect fit. Each order comes with one cable, and the camera is not included.\u003c\/p\u003e"}

{"id":4335610036342,"title":"Adafruit High Temp Waterproof DS18B20 Digital temperature sensor + extras","handle":"adafruit-high-temp-waterproof-ds18b20-digital-temperature-sensor-extras","description":"\u003cp\u003eThis is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive than the other waterproof version we have with a PVC cable because this one can be used up to 125°C - the limit of the sensor itself. That said, it's still not recommended for salt-water or corrosive environments since the stainless steel will eventually rust!\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eBecause the sensor signal is digital, you don't get any signal degradation even over long distances! These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe only downside is they use the Dallas 1-Wire protocol, which is somewhat complex, and requires a bunch of code to parse out the communication. If you want something really simple, and you have an analog input pin, the TMP36 is trivial to get going.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eWe toss in a 4.7k resistor, which is required as a pullup from the DATA to VCC line when using the sensor. We don't have a detailed tutorial up yet but you can get started by using the \u003ca href=\"http:\/\/www.milesburton.com\/?title=Dallas_Temperature_Control_Library\" target=\"_blank\"\u003eDallas Temperature Control Arduino library\u003c\/a\u003e which requires also the \u003ca href=\"http:\/\/www.pjrc.com\/teensy\/td_libs_OneWire.html\" target=\"_blank\"\u003eOneWire Library\u003c\/a\u003e.\u003c\/p\u003e","published_at":"2020-02-12T15:16:01-05:00","created_at":"2019-11-07T09:27:06-05:00","vendor":"Adafruit","type":"Adafruit","tags":[],"price":1490,"price_min":1490,"price_max":1490,"available":true,"price_varies":false,"compare_at_price":1495,"compare_at_price_min":1495,"compare_at_price_max":1495,"compare_at_price_varies":false,"variants":[{"id":31095113580662,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K588","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit High Temp Waterproof DS18B20 Digital temperature sensor + extras","public_title":null,"options":["Default Title"],"price":1490,"weight":0,"compare_at_price":1495,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/642-00.jpg?v=1573136826"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/642-00.jpg?v=1573136826","options":["Title"],"media":[{"alt":null,"id":5555909951606,"position":1,"preview_image":{"aspect_ratio":1.332,"height":728,"width":970,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/642-00.jpg?v=1573136826"},"aspect_ratio":1.332,"height":728,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/642-00.jpg?v=1573136826","width":970}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive than the other waterproof version we have with a PVC cable because this one can be used up to 125°C - the limit of the sensor itself. That said, it's still not recommended for salt-water or corrosive environments since the stainless steel will eventually rust!\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eBecause the sensor signal is digital, you don't get any signal degradation even over long distances! These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe only downside is they use the Dallas 1-Wire protocol, which is somewhat complex, and requires a bunch of code to parse out the communication. If you want something really simple, and you have an analog input pin, the TMP36 is trivial to get going.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eWe toss in a 4.7k resistor, which is required as a pullup from the DATA to VCC line when using the sensor. We don't have a detailed tutorial up yet but you can get started by using the \u003ca href=\"http:\/\/www.milesburton.com\/?title=Dallas_Temperature_Control_Library\" target=\"_blank\"\u003eDallas Temperature Control Arduino library\u003c\/a\u003e which requires also the \u003ca href=\"http:\/\/www.pjrc.com\/teensy\/td_libs_OneWire.html\" target=\"_blank\"\u003eOneWire Library\u003c\/a\u003e.\u003c\/p\u003e"}

{"id":4352671842422,"title":"Adafruit Female DC Power adapter - 2.1mm jack to screw terminal block","handle":"adafruit-female-dc-power-adapter-2-1mm-jack-to-screw-terminal-block","description":"\u003cp\u003eIf you need to connect a DC power wall wart to a board that doesn't have a DC jack - this adapter will come in very handy! There is a 2.1mm DC jack on one end, and a screw terminal block on the other. The terminals are labeled with positive\/negative assuming a positive-tip configuration (which is the most common)\u003c\/p\u003e","published_at":"2020-02-12T15:17:47-05:00","created_at":"2019-11-21T12:37:24-05:00","vendor":"Adafruit","type":"Adafruit","tags":[],"price":195,"price_min":195,"price_max":195,"available":true,"price_varies":false,"compare_at_price":200,"compare_at_price_min":200,"compare_at_price_max":200,"compare_at_price_varies":false,"variants":[{"id":31242920591478,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K589","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Female DC Power adapter - 2.1mm jack to screw terminal block","public_title":null,"options":["Default Title"],"price":195,"weight":91,"compare_at_price":200,"inventory_quantity":47,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/368-03.jpg?v=1574357844"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/368-03.jpg?v=1574357844","options":["Title"],"media":[{"alt":null,"id":5666006630518,"position":1,"preview_image":{"aspect_ratio":1.332,"height":728,"width":970,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/368-03.jpg?v=1574357844"},"aspect_ratio":1.332,"height":728,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/368-03.jpg?v=1574357844","width":970}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eIf you need to connect a DC power wall wart to a board that doesn't have a DC jack - this adapter will come in very handy! There is a 2.1mm DC jack on one end, and a screw terminal block on the other. The terminals are labeled with positive\/negative assuming a positive-tip configuration (which is the most common)\u003c\/p\u003e"}

{"id":4413691297910,"title":"Adafruit 2-pin JST SM Plug + Receptacle Cable Set","handle":"adafruit-2-pin-jst-sm-plug-receptacle-cable-set","description":"\u003cp\u003eThese 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type receptacle connector. They are good for whenever you have 2 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the \u003ca href=\"http:\/\/www.adafruit.com\/datasheets\/JSTSM.pdf\" target=\"_blank\"\u003eJST SM connector datasheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eEach order receives one of each connector.\u003c\/p\u003e","published_at":"2020-02-12T15:31:09-05:00","created_at":"2020-02-12T15:22:38-05:00","vendor":"Adafruit","type":"Adafruit","tags":[],"price":70,"price_min":70,"price_max":70,"available":true,"price_varies":false,"compare_at_price":75,"compare_at_price_min":75,"compare_at_price_max":75,"compare_at_price_varies":false,"variants":[{"id":31432657600630,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K591","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit 2-pin JST SM Plug + Receptacle Cable Set","public_title":null,"options":["Default Title"],"price":70,"weight":0,"compare_at_price":75,"inventory_quantity":23,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2880-03.jpg?v=1581538958"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2880-03.jpg?v=1581538958","options":["Title"],"media":[{"alt":null,"id":6095166439542,"position":1,"preview_image":{"aspect_ratio":1.332,"height":728,"width":970,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2880-03.jpg?v=1581538958"},"aspect_ratio":1.332,"height":728,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2880-03.jpg?v=1581538958","width":970}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThese 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type receptacle connector. They are good for whenever you have 2 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily. For more information, check the \u003ca href=\"http:\/\/www.adafruit.com\/datasheets\/JSTSM.pdf\" target=\"_blank\"\u003eJST SM connector datasheet\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eEach order receives one of each connector.\u003c\/p\u003e"}

{"id":4357144313974,"title":"Adafruit ItsyBitsy 32u4 - 5V 16MHz","handle":"adafruit-itsybitsy-32u4-5v-16mhz","description":"\u003cp\u003eItsyBitsy is only 1.4\" long by 0.7\" wide, but has 6 power pins, 6 analog \u0026amp; digital pins and 17 digital pins. It packs much of the same capability as an Arduino UNO. So it's great once you've finished up a prototype on a bigger Arduino, and want to make the project much smaller.\u003c\/p\u003e\u003cp\u003eThe ItsyBitsy 32u4 5V 16MHz uses the Atmega32u4 chip, which is the same core chip in the Arduino Leonardo as well as the same chip we use in our Feather 32u4. It runs at the same speed and voltage of an Arduino UNO or Leonardo. So you'll be happy to hear that not only is ItsyBitsy programmable using the Arduino IDE as you already set up, but a vast number of Arduino projects will work out of the box!\u003c\/p\u003e\u003cp\u003eWe recommend this as an upgrade from the Pro Trinket 5V because this has native USB so it will work with all computers, USB serial debugging, and a more reliable bootloader. You can even use the Pro Trinket LiPo backpack with this board to add recharge-able battery.\u003c\/p\u003e","published_at":"2020-02-12T15:55:28-05:00","created_at":"2019-11-26T17:19:22-05:00","vendor":"Adafruit","type":"Adafruit","tags":[],"price":990,"price_min":990,"price_max":990,"available":true,"price_varies":false,"compare_at_price":995,"compare_at_price_min":995,"compare_at_price_max":995,"compare_at_price_varies":false,"variants":[{"id":31261031694454,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K595","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit ItsyBitsy 32u4 - 5V 16MHz","public_title":null,"options":["Default Title"],"price":990,"weight":0,"compare_at_price":995,"inventory_quantity":24,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3677-01.jpg?v=1574806762"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3677-01.jpg?v=1574806762","options":["Title"],"media":[{"alt":null,"id":5693272391798,"position":1,"preview_image":{"aspect_ratio":1.332,"height":728,"width":970,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3677-01.jpg?v=1574806762"},"aspect_ratio":1.332,"height":728,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3677-01.jpg?v=1574806762","width":970}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eItsyBitsy is only 1.4\" long by 0.7\" wide, but has 6 power pins, 6 analog \u0026amp; digital pins and 17 digital pins. It packs much of the same capability as an Arduino UNO. So it's great once you've finished up a prototype on a bigger Arduino, and want to make the project much smaller.\u003c\/p\u003e\u003cp\u003eThe ItsyBitsy 32u4 5V 16MHz uses the Atmega32u4 chip, which is the same core chip in the Arduino Leonardo as well as the same chip we use in our Feather 32u4. It runs at the same speed and voltage of an Arduino UNO or Leonardo. So you'll be happy to hear that not only is ItsyBitsy programmable using the Arduino IDE as you already set up, but a vast number of Arduino projects will work out of the box!\u003c\/p\u003e\u003cp\u003eWe recommend this as an upgrade from the Pro Trinket 5V because this has native USB so it will work with all computers, USB serial debugging, and a more reliable bootloader. You can even use the Pro Trinket LiPo backpack with this board to add recharge-able battery.\u003c\/p\u003e"}

{"id":4357145362550,"title":"Adafruit Electroluminescent (EL) Panel - 20cm x 15cm Aqua","handle":"adafruit-electroluminescent-el-panel-20cm-x-15cm-aqua","description":"\u003cp\u003eThis is a big sheet of flexible plastic coated with EL material so its like one big glowing square. It emits an even aqua glow over the entire shape, and you can even cut it into any shape you want using scissors as long as the connector is still attached (you'll probably need a few inches of the edge as well). Another option if you want to have a custom design, we suggest cutting something opaque to 'mask it' or printing onto a transparency and placing that on top. We do not suggest laser cutting it (the coating may be toxic), although a vinyl-cutter might work OK.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eMeasures 20 cm x 15 cm (7.9\" x 5.9\"), about 0.5mm thick. Its covered in what seems to be PVC, the panel is thus spill proof - but note that the connector is NOT waterproof, just a bit of heatshrink. This isn't something we would suggest leaving outdoors for extended periods.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eComes with a matching high power 12V inverter and a female DC jack so you can plug it directly into a 12V supply. The inverter is a 'potted waterproof type' and is thus very quiet (no resonating cavity!). This panel is not going to run on our pocket inverter, you really need to have 12V! The full panel draws about 210 mA from a 12V supply.\u003c\/p\u003e","published_at":"2020-02-12T16:08:40-05:00","created_at":"2019-11-26T17:21:43-05:00","vendor":"Adafruit","type":"Adafruit","tags":[],"price":3490,"price_min":3490,"price_max":3490,"available":true,"price_varies":false,"compare_at_price":3495,"compare_at_price_min":3495,"compare_at_price_max":3495,"compare_at_price_varies":false,"variants":[{"id":31261035069558,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K597","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Electroluminescent (EL) Panel - 20cm x 15cm Aqua","public_title":null,"options":["Default Title"],"price":3490,"weight":0,"compare_at_price":3495,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/414-02.jpg?v=1574806904"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/414-02.jpg?v=1574806904","options":["Title"],"media":[{"alt":null,"id":5693280977014,"position":1,"preview_image":{"aspect_ratio":1.332,"height":728,"width":970,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/414-02.jpg?v=1574806904"},"aspect_ratio":1.332,"height":728,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/414-02.jpg?v=1574806904","width":970}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis is a big sheet of flexible plastic coated with EL material so its like one big glowing square. It emits an even aqua glow over the entire shape, and you can even cut it into any shape you want using scissors as long as the connector is still attached (you'll probably need a few inches of the edge as well). Another option if you want to have a custom design, we suggest cutting something opaque to 'mask it' or printing onto a transparency and placing that on top. We do not suggest laser cutting it (the coating may be toxic), although a vinyl-cutter might work OK.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eMeasures 20 cm x 15 cm (7.9\" x 5.9\"), about 0.5mm thick. Its covered in what seems to be PVC, the panel is thus spill proof - but note that the connector is NOT waterproof, just a bit of heatshrink. This isn't something we would suggest leaving outdoors for extended periods.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eComes with a matching high power 12V inverter and a female DC jack so you can plug it directly into a 12V supply. The inverter is a 'potted waterproof type' and is thus very quiet (no resonating cavity!). This panel is not going to run on our pocket inverter, you really need to have 12V! The full panel draws about 210 mA from a 12V supply.\u003c\/p\u003e"}

{"id":4357146214518,"title":"Adafruit Circuit Playground Express Enclosure","handle":"adafruit-circuit-playground-express-enclosure","description":"\u003cp\u003eThis minimal but elegant acrylic case will turn your board into an electronic snowflake. The enclosure is designed to snap together securely with no tools required. You can still press all the buttons and slide the switch thanks to a clever plastic widget fitted inside. The case winds around all the touch pads so you can still touch them or attach alligator clips.\u003c\/p\u003e\u003cp\u003eOn the back, we have two slots that can be used to pass through ribbon or webbing up to 1\" \/2.5mm wide There is also a slim 1\/4\"-20 nut that is embedded in the center back. This is compatible with any camera mounting accessory, so if you need a solid attachment, you can use any camera positioning tool or tripod.\u003c\/p\u003e\u003cp\u003eSince it's crystal clear, you can see all the NeoPixels shining in glorious color. The light sensor also works just fine and the case will not block IR messages going in or out. Even though there are no microphone or speaker holes, audio passes through the case via various small openings - we tested it and the difference is barely noticeable.\u003c\/p\u003e\u003cp\u003eThis enclosure is only compatible with the Circuit Playground Express and the Circuit Playground Bluefruit! It will not fit the older Classic.\u003c\/p\u003e\u003cp\u003eThis case will protect your Circuit Playground board from every day usage, but it is not waterproof or weatherproof. This product comes as 2 molded plastic halves with the buttons in place. No boards, cables, or accessories are included.\u003c\/p\u003e","published_at":"2020-02-12T16:31:33-05:00","created_at":"2019-11-26T17:23:32-05:00","vendor":"Adafruit","type":"Adafruit","tags":[],"price":490,"price_min":490,"price_max":490,"available":true,"price_varies":false,"compare_at_price":495,"compare_at_price_min":495,"compare_at_price_max":495,"compare_at_price_varies":false,"variants":[{"id":31261038313590,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K600","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Circuit Playground Express Enclosure","public_title":null,"options":["Default Title"],"price":490,"weight":0,"compare_at_price":495,"inventory_quantity":28,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3915-02.jpg?v=1574807012"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3915-02.jpg?v=1574807012","options":["Title"],"media":[{"alt":null,"id":5693287825526,"position":1,"preview_image":{"aspect_ratio":1.332,"height":728,"width":970,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3915-02.jpg?v=1574807012"},"aspect_ratio":1.332,"height":728,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3915-02.jpg?v=1574807012","width":970}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis minimal but elegant acrylic case will turn your board into an electronic snowflake. The enclosure is designed to snap together securely with no tools required. You can still press all the buttons and slide the switch thanks to a clever plastic widget fitted inside. The case winds around all the touch pads so you can still touch them or attach alligator clips.\u003c\/p\u003e\u003cp\u003eOn the back, we have two slots that can be used to pass through ribbon or webbing up to 1\" \/2.5mm wide There is also a slim 1\/4\"-20 nut that is embedded in the center back. This is compatible with any camera mounting accessory, so if you need a solid attachment, you can use any camera positioning tool or tripod.\u003c\/p\u003e\u003cp\u003eSince it's crystal clear, you can see all the NeoPixels shining in glorious color. The light sensor also works just fine and the case will not block IR messages going in or out. Even though there are no microphone or speaker holes, audio passes through the case via various small openings - we tested it and the difference is barely noticeable.\u003c\/p\u003e\u003cp\u003eThis enclosure is only compatible with the Circuit Playground Express and the Circuit Playground Bluefruit! It will not fit the older Classic.\u003c\/p\u003e\u003cp\u003eThis case will protect your Circuit Playground board from every day usage, but it is not waterproof or weatherproof. This product comes as 2 molded plastic halves with the buttons in place. No boards, cables, or accessories are included.\u003c\/p\u003e"}

{"id":4357147361398,"title":"Adafruit Grand Central M4 Express featuring SAMD51 - Without Headers","handle":"adafruit-grand-central-m4-express-featuring-samd51-without-headers","description":"\u003cp\u003eThis board is like a freight train, with its 120MHz Cortex M4 with floating point support. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset.\u003c\/p\u003e\u003cp\u003eThe Grand Central is the first SAMD board that has enough pins to make it in the form of the Arduino Mega - with a massive number of pins, tons of analog inputs, dual DAC output, 8 MBytes of QSPI flash, SD card socket, and a NeoPixel.\u003c\/p\u003e\u003cp\u003eThis version is lower cost and lower profile, we didn't solder any of the through-hole components in. Perfect if you want to solder directly to the board, or jam it into a small spot in your build. We include only the assembled and tested board, a loose 2.1mm DC jack and bumpers.\u003c\/p\u003e\u003cp\u003eTo start off our ATSAMD51 journey we are going large with the Mega shape and pinout you know and love. The front half has the same shape and pinout as our Metro's, so it is compatible with all our shields. It's got analog pins where you expect, and SPI\/UART\/I2C hardware support in the same spot as the Metro 328 and M0.\u003c\/p\u003e","published_at":"2020-02-12T16:57:13-05:00","created_at":"2019-11-26T17:26:58-05:00","vendor":"Adafruit","type":"Adafruit","tags":[],"price":2990,"price_min":2990,"price_max":2990,"available":false,"price_varies":false,"compare_at_price":2995,"compare_at_price_min":2995,"compare_at_price_max":2995,"compare_at_price_varies":false,"variants":[{"id":31261042802806,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K604","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Adafruit Grand Central M4 Express featuring SAMD51 - Without Headers","public_title":null,"options":["Default Title"],"price":2990,"weight":0,"compare_at_price":2995,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/4084-05.jpg?v=1574807218"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/4084-05.jpg?v=1574807218","options":["Title"],"media":[{"alt":null,"id":5693300998262,"position":1,"preview_image":{"aspect_ratio":1.332,"height":728,"width":970,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/4084-05.jpg?v=1574807218"},"aspect_ratio":1.332,"height":728,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/4084-05.jpg?v=1574807218","width":970}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis board is like a freight train, with its 120MHz Cortex M4 with floating point support. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset.\u003c\/p\u003e\u003cp\u003eThe Grand Central is the first SAMD board that has enough pins to make it in the form of the Arduino Mega - with a massive number of pins, tons of analog inputs, dual DAC output, 8 MBytes of QSPI flash, SD card socket, and a NeoPixel.\u003c\/p\u003e\u003cp\u003eThis version is lower cost and lower profile, we didn't solder any of the through-hole components in. Perfect if you want to solder directly to the board, or jam it into a small spot in your build. We include only the assembled and tested board, a loose 2.1mm DC jack and bumpers.\u003c\/p\u003e\u003cp\u003eTo start off our ATSAMD51 journey we are going large with the Mega shape and pinout you know and love. The front half has the same shape and pinout as our Metro's, so it is compatible with all our shields. It's got analog pins where you expect, and SPI\/UART\/I2C hardware support in the same spot as the Metro 328 and M0.\u003c\/p\u003e"}

{"id":4362345611382,"title":"Adafruit PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi","handle":"adafruit-pioled-128x32-monochrome-oled-add-on-for-raspberry-pi","description":"\u003cp\u003eIf you're looking for the most compact li'l display for a Raspberry Pi (most likely a \u003ca href=\"https:\/\/www.adafruit.com\/category\/813\" target=\"_blank\"\u003ePi Zero\u003c\/a\u003e) project, this might be just the thing you need!\u003c\/p\u003e\u003cp\u003eThe Adafruit 128x32 PiOLED is your little OLED pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The PiOLED comes with a monochrome 128x32 OLED, with sharp white pixels. The OLED uses only the I2C pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. It's also nice and compact so it will fit into any case.\u003c\/p\u003e\u003cp\u003eThese displays are small, only about 1\" diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!\u003c\/p\u003e\u003cp\u003eUsing the display is very easy, we have a Python library for the SSD1306 chipset. Our example code allows you to draw images, text, whatever you like, using the Python imaging library. Our tests showed 30 FPS update rates so you can do animations or simple video.\u003c\/p\u003e","published_at":"2020-03-23T15:22:13-04:00","created_at":"2019-12-02T19:27:12-05:00","vendor":"Adafruit","type":"Adafruit","tags":[],"price":1490,"price_min":1490,"price_max":1490,"available":true,"price_varies":false,"compare_at_price":1495,"compare_at_price_min":1495,"compare_at_price_max":1495,"compare_at_price_varies":false,"variants":[{"id":31278879998070,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K622","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi","public_title":null,"options":["Default Title"],"price":1490,"weight":0,"compare_at_price":1495,"inventory_quantity":68,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3527-02.jpg?v=1575332832"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3527-02.jpg?v=1575332832","options":["Title"],"media":[{"alt":null,"id":5732160372854,"position":1,"preview_image":{"aspect_ratio":1.332,"height":728,"width":970,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3527-02.jpg?v=1575332832"},"aspect_ratio":1.332,"height":728,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/3527-02.jpg?v=1575332832","width":970}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eIf you're looking for the most compact li'l display for a Raspberry Pi (most likely a \u003ca href=\"https:\/\/www.adafruit.com\/category\/813\" target=\"_blank\"\u003ePi Zero\u003c\/a\u003e) project, this might be just the thing you need!\u003c\/p\u003e\u003cp\u003eThe Adafruit 128x32 PiOLED is your little OLED pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The PiOLED comes with a monochrome 128x32 OLED, with sharp white pixels. The OLED uses only the I2C pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. It's also nice and compact so it will fit into any case.\u003c\/p\u003e\u003cp\u003eThese displays are small, only about 1\" diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!\u003c\/p\u003e\u003cp\u003eUsing the display is very easy, we have a Python library for the SSD1306 chipset. Our example code allows you to draw images, text, whatever you like, using the Python imaging library. Our tests showed 30 FPS update rates so you can do animations or simple video.\u003c\/p\u003e"}

{"id":4405348696182,"title":"Adafruit Accessories 3xAAA Battery Holder w\/ On\/Off Switch","handle":"adafruit-accessories-3xaaa-battery-holder-w-on-off-switch","description":"\u003cp\u003eThis battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion\/polymer (Li-Ion) batteries and have an on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connector meant for one of our Li-Ion\/Poly batteries. (Of course, you can't recharge them like Li-Ion\/Polys, so don't try to plug this into one of our Li-Ion\/Poly charger boards!)\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eFits any standard AAA battery. When using rechargeable NiMH the output voltage will range from about 3.7V with charged batteries to 2.7V at the end of life with a nominal voltage of 3.6V. When using alkalines, the output will range from 4.6V with new batteries to 3.3V at the end of life with a nominal voltage of about 4.5V\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe polarity matches that of our 2-pin JST cable and Li-Ion\/Poly batteries. Uses a genuine JST connector so it wont 'catch and tear' in JST connectors.\u003c\/p\u003e","published_at":"2020-04-27T19:27:01-04:00","created_at":"2020-01-31T13:20:00-05:00","vendor":"Adafruit","type":"Adafruit","tags":[],"price":190,"price_min":190,"price_max":190,"available":true,"price_varies":false,"compare_at_price":195,"compare_at_price_min":195,"compare_at_price_max":195,"compare_at_price_varies":false,"variants":[{"id":31409224155254,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K662","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Accessories 3xAAA Battery Holder w\/ On\/Off Switch","public_title":null,"options":["Default Title"],"price":190,"weight":91,"compare_at_price":195,"inventory_quantity":215,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/727-03.jpg?v=1580494801"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/727-03.jpg?v=1580494801","options":["Title"],"media":[{"alt":null,"id":6050042216566,"position":1,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/727-03.jpg?v=1580494801"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/727-03.jpg?v=1580494801","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion\/polymer (Li-Ion) batteries and have an on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connector meant for one of our Li-Ion\/Poly batteries. (Of course, you can't recharge them like Li-Ion\/Polys, so don't try to plug this into one of our Li-Ion\/Poly charger boards!)\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eFits any standard AAA battery. When using rechargeable NiMH the output voltage will range from about 3.7V with charged batteries to 2.7V at the end of life with a nominal voltage of 3.6V. When using alkalines, the output will range from 4.6V with new batteries to 3.3V at the end of life with a nominal voltage of about 4.5V\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe polarity matches that of our 2-pin JST cable and Li-Ion\/Poly batteries. Uses a genuine JST connector so it wont 'catch and tear' in JST connectors.\u003c\/p\u003e"}

{"id":4357149163638,"title":"Adafruit \"Three Fives\" Discrete 555 Timer Kit v2.0","handle":"adafruit-three-fives-discrete-555-timer-kit-v2-0","description":"\u003cp\u003eThe \"Three Fives\" Discrete 555 Timer kit from Evil Mad Scientist Laboratories is a faithful and functional transistor-scale replica of the classic NE555 timer integrated circuit, one of the most classic, popular, and all-around useful chips of all time.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe Three Fives kit was designed by Eric Schlaepfer, in collaboration with Evil Mad Scientist Laboratories. The kit is lovingly designed to resemble an (overgrown) integrated circuit, based around an extra-thick matte-finish printed circuit board. It comes complete with a tough and sturdy plastic stand that gives the circuit board eight legs in the shape of DIP-packaged integrated circuit pins.\u003c\/p\u003e","published_at":"2020-03-23T14:52:47-04:00","created_at":"2019-11-26T17:31:21-05:00","vendor":"Adafruit","type":"Adafruit","tags":[],"price":3490,"price_min":3490,"price_max":3490,"available":false,"price_varies":false,"compare_at_price":3495,"compare_at_price_min":3495,"compare_at_price_max":3495,"compare_at_price_varies":false,"variants":[{"id":31261053681782,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K616","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Adafruit \"Three Fives\" Discrete 555 Timer Kit v2.0","public_title":null,"options":["Default Title"],"price":3490,"weight":0,"compare_at_price":3495,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1526-00.jpg?v=1574807514","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1526-01.jpg?v=1574807516"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1526-00.jpg?v=1574807514","options":["Title"],"media":[{"alt":null,"id":5693320953974,"position":1,"preview_image":{"aspect_ratio":1.332,"height":728,"width":970,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1526-00.jpg?v=1574807514"},"aspect_ratio":1.332,"height":728,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1526-00.jpg?v=1574807514","width":970},{"alt":null,"id":5693321085046,"position":2,"preview_image":{"aspect_ratio":1.332,"height":728,"width":970,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1526-01.jpg?v=1574807516"},"aspect_ratio":1.332,"height":728,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1526-01.jpg?v=1574807516","width":970}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe \"Three Fives\" Discrete 555 Timer kit from Evil Mad Scientist Laboratories is a faithful and functional transistor-scale replica of the classic NE555 timer integrated circuit, one of the most classic, popular, and all-around useful chips of all time.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe Three Fives kit was designed by Eric Schlaepfer, in collaboration with Evil Mad Scientist Laboratories. The kit is lovingly designed to resemble an (overgrown) integrated circuit, based around an extra-thick matte-finish printed circuit board. It comes complete with a tough and sturdy plastic stand that gives the circuit board eight legs in the shape of DIP-packaged integrated circuit pins.\u003c\/p\u003e"}

{"id":4439717970038,"title":"Adafruit Diffused Blue 3mm LED (25 pack)","handle":"adafruit-diffused-blue-3mm-led-25-pack","description":"\u003cp\u003eNeed some indicators? We are big fans of these diffused blue LEDs, as featured in the LoL shield. They are really bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.\u003c\/p\u003e","published_at":"2020-03-23T14:58:24-04:00","created_at":"2020-03-23T14:55:51-04:00","vendor":"Adafruit","type":"Adafruit","tags":[],"price":590,"price_min":590,"price_max":590,"available":true,"price_varies":false,"compare_at_price":595,"compare_at_price_min":595,"compare_at_price_max":595,"compare_at_price_varies":false,"variants":[{"id":31497053601910,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K617","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Diffused Blue 3mm LED (25 pack)","public_title":null,"options":["Default Title"],"price":590,"weight":0,"compare_at_price":595,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/780-01.jpg?v=1584989751"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/780-01.jpg?v=1584989751","options":["Title"],"media":[{"alt":null,"id":6256972234870,"position":1,"preview_image":{"aspect_ratio":1.332,"height":728,"width":970,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/780-01.jpg?v=1584989751"},"aspect_ratio":1.332,"height":728,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/780-01.jpg?v=1584989751","width":970}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eNeed some indicators? We are big fans of these diffused blue LEDs, as featured in the LoL shield. They are really bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project.\u003c\/p\u003e"}