Adafruit

{"id":9121133384,"title":"Adafruit DC \u0026 Stepper Motor HAT for Raspberry Pi - Mini Kit","handle":"adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit","description":"\u003cp\u003eSay hello to the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.\u003cbr\u003e\u003cbr\u003eSince the Raspberry Pi does not have a lot of PWM pins, Adafruit used a fully-dedicated PWM driver chip\u003cstrong\u003e \u003c\/strong\u003eonboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA \u0026amp; SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins.\u003c\/p\u003e \u003cp\u003eIn fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include.\u003c\/p\u003e \u003cp\u003eMotors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time)\u003cstrong\u003e, \u003c\/strong\u003ea big improvement over L293D drivers and there are built-in flyback diodes as well.\u003c\/p\u003e \u003cp\u003eWe even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks.\u003c\/p\u003e","published_at":"2017-04-06T17:01:00-04:00","created_at":"2017-04-03T15:14:41-04:00","vendor":"Adafruit","type":"Adafruit","tags":["Kit","Pi Hats"],"price":2245,"price_min":2245,"price_max":2245,"available":true,"price_varies":false,"compare_at_price":2250,"compare_at_price_min":2250,"compare_at_price_max":2250,"compare_at_price_varies":false,"variants":[{"id":33471072264,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K199","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit DC \u0026 Stepper Motor HAT for Raspberry Pi - Mini Kit","public_title":null,"options":["Default Title"],"price":2245,"weight":0,"compare_at_price":2250,"inventory_quantity":69,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-01.jpg?v=1491246885","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-02.jpg?v=1491246886","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-00.jpg?v=1491246891","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-05.jpg?v=1491246893"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-01.jpg?v=1491246885","options":["Title"],"media":[{"alt":null,"id":366364917795,"position":1,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-01.jpg?v=1491246885"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-01.jpg?v=1491246885","width":1200},{"alt":null,"id":366364983331,"position":2,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-02.jpg?v=1491246886"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-02.jpg?v=1491246886","width":1200},{"alt":null,"id":366365016099,"position":3,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-00.jpg?v=1491246891"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-00.jpg?v=1491246891","width":1200},{"alt":null,"id":366365048867,"position":4,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-05.jpg?v=1491246893"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2348-05.jpg?v=1491246893","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eSay hello to the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.\u003cbr\u003e\u003cbr\u003eSince the Raspberry Pi does not have a lot of PWM pins, Adafruit used a fully-dedicated PWM driver chip\u003cstrong\u003e \u003c\/strong\u003eonboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA \u0026amp; SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins.\u003c\/p\u003e \u003cp\u003eIn fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include.\u003c\/p\u003e \u003cp\u003eMotors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time)\u003cstrong\u003e, \u003c\/strong\u003ea big improvement over L293D drivers and there are built-in flyback diodes as well.\u003c\/p\u003e \u003cp\u003eWe even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks.\u003c\/p\u003e"}

{"id":8608171656,"title":"Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit [ADA2345]","handle":"adafruit-rgb-matrix-hat-rtc-for-raspberry-pi-mini-kit","description":"\u003cp\u003eYou can now create a dazzling display with your Raspberry Pi Model A+\/B+\/Pi 2 or Pi 3 with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those we stock in the shop and create a colorful scrolling display or mini LED wall with ease. It has a simple design where you just plug in power, plug in IDC cable, and run Python code. You can plug a 5V 4A wall adapter into the HAT and it will automatically protect against negative, over or under-voltages. This has onboard level shifters to convert the RasPi's 3.3V to 5.0V logic for clean and glitch free matrix driving. Finally, it has a DS1307 Real Time Clock, which can keep track of time for the Pi even when it is rebooted or powered down, to make for really nice time displays\u003c\/p\u003e \u003cp\u003eWorks with any of our 16x32, 32x32 or 32x64 RGB LED Matrices with HUB75 connections. You can even chain multiple matrices together for a longer display, you can chain as many as you like but the bigger the display the harder it is on the Pi so keep that in mind. We don't recommend more than 32x128 pixel setups\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this HAT is only for use with HUB75 type RGB Matrices\u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:44-05:00","vendor":"Adafruit","type":"Adafruit","tags":["Kit","Pi Hats"],"price":2490,"price_min":2490,"price_max":2490,"available":true,"price_varies":false,"compare_at_price":2495,"compare_at_price_min":2495,"compare_at_price_max":2495,"compare_at_price_varies":false,"variants":[{"id":29778534344,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K126","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit [ADA2345]","public_title":null,"options":["Default Title"],"price":2490,"weight":0,"compare_at_price":2495,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-06.jpg?v=1486585774","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-00.jpg?v=1486585774","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-05.jpg?v=1486585774","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-01.jpg?v=1486585774","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-04.jpg?v=1486585774","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-02.jpg?v=1486585774"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-06.jpg?v=1486585774","options":["Title"],"media":[{"alt":null,"id":322574385187,"position":1,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-06.jpg?v=1486585774"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-06.jpg?v=1486585774","width":1200},{"alt":null,"id":322570879011,"position":2,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-00.jpg?v=1486585774"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-00.jpg?v=1486585774","width":1200},{"alt":null,"id":322571141155,"position":3,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-05.jpg?v=1486585774"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-05.jpg?v=1486585774","width":1200},{"alt":null,"id":322571272227,"position":4,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-01.jpg?v=1486585774"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-01.jpg?v=1486585774","width":1200},{"alt":null,"id":322571370531,"position":5,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-04.jpg?v=1486585774"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-04.jpg?v=1486585774","width":1200},{"alt":null,"id":322571534371,"position":6,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-02.jpg?v=1486585774"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2345-02.jpg?v=1486585774","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eYou can now create a dazzling display with your Raspberry Pi Model A+\/B+\/Pi 2 or Pi 3 with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those we stock in the shop and create a colorful scrolling display or mini LED wall with ease. It has a simple design where you just plug in power, plug in IDC cable, and run Python code. You can plug a 5V 4A wall adapter into the HAT and it will automatically protect against negative, over or under-voltages. This has onboard level shifters to convert the RasPi's 3.3V to 5.0V logic for clean and glitch free matrix driving. Finally, it has a DS1307 Real Time Clock, which can keep track of time for the Pi even when it is rebooted or powered down, to make for really nice time displays\u003c\/p\u003e \u003cp\u003eWorks with any of our 16x32, 32x32 or 32x64 RGB LED Matrices with HUB75 connections. You can even chain multiple matrices together for a longer display, you can chain as many as you like but the bigger the display the harder it is on the Pi so keep that in mind. We don't recommend more than 32x128 pixel setups\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this HAT is only for use with HUB75 type RGB Matrices\u003c\/p\u003e"}

{"id":8608172744,"title":"Adafruit Ultimate GPS HAT for Raspberry Pi A+\/B+\/Pi 2\/3\/Pi 4 - Mini Kit","handle":"adafruit-ultimate-gps-hat-for-raspberry-pi-a-b-pi-2-mini-kit","description":"\u003cdiv\u003e \u003cp\u003eThis new HAT from Adafruit adds their celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2. Does not work with the Pi 3 at this time\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eHere's the break down on the GPS module:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e -165 dBm sensitivity, 10 Hz updates, 66 channels\u003c\/li\u003e \u003cli\u003e 20mA current draw\u003c\/li\u003e \u003cli\u003e Built in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off\u003c\/li\u003e \u003cli\u003e PPS output on fix, by default connected to pin #4\u003c\/li\u003e \u003cli\u003e Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky view\u003c\/li\u003e \u003cli\u003e Fix status LED blinks to let you know when the GPS has determined the current coordinates\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe HAT is based on Adafruit's Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more.\u003c\/p\u003e \u003cdiv\u003e \u003cp\u003ePlease note, this HAT takes over the Raspberry Pi's hardware UART to send\/receive data to and from the GPS module. So, if you need to use the RX\/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:47-05:00","vendor":"Adafruit","type":"Adafruit","tags":["GPS","Pi Hats"],"price":2990,"price_min":2990,"price_max":2990,"available":true,"price_varies":false,"compare_at_price":4495,"compare_at_price_min":4495,"compare_at_price_max":4495,"compare_at_price_varies":false,"variants":[{"id":29778535432,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K140","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Ultimate GPS HAT for Raspberry Pi A+\/B+\/Pi 2\/3\/Pi 4 - Mini Kit","public_title":null,"options":["Default Title"],"price":2990,"weight":0,"compare_at_price":4495,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-05.jpg?v=1486741538","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-01.jpg?v=1486741540","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-00.jpg?v=1486741541","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-02.jpg?v=1486741544","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-04.jpg?v=1486741546","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-03.jpg?v=1486741548"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-05.jpg?v=1486741538","options":["Title"],"media":[{"alt":null,"id":323573973027,"position":1,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-05.jpg?v=1486741538"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-05.jpg?v=1486741538","width":1200},{"alt":null,"id":323574104099,"position":2,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-01.jpg?v=1486741540"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-01.jpg?v=1486741540","width":1200},{"alt":null,"id":323574202403,"position":3,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-00.jpg?v=1486741541"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-00.jpg?v=1486741541","width":1200},{"alt":null,"id":323574267939,"position":4,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-02.jpg?v=1486741544"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-02.jpg?v=1486741544","width":1200},{"alt":null,"id":323574333475,"position":5,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-04.jpg?v=1486741546"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-04.jpg?v=1486741546","width":1200},{"alt":null,"id":323574431779,"position":6,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-03.jpg?v=1486741548"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2324-03.jpg?v=1486741548","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e \u003cp\u003eThis new HAT from Adafruit adds their celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2. Does not work with the Pi 3 at this time\u003c\/p\u003e \u003c\/div\u003e \u003cdiv\u003e \u003cp\u003eHere's the break down on the GPS module:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e -165 dBm sensitivity, 10 Hz updates, 66 channels\u003c\/li\u003e \u003cli\u003e 20mA current draw\u003c\/li\u003e \u003cli\u003e Built in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off\u003c\/li\u003e \u003cli\u003e PPS output on fix, by default connected to pin #4\u003c\/li\u003e \u003cli\u003e Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky view\u003c\/li\u003e \u003cli\u003e Fix status LED blinks to let you know when the GPS has determined the current coordinates\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe HAT is based on Adafruit's Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more.\u003c\/p\u003e \u003cdiv\u003e \u003cp\u003ePlease note, this HAT takes over the Raspberry Pi's hardware UART to send\/receive data to and from the GPS module. So, if you need to use the RX\/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi.\u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e"}

{"id":8608173320,"title":"Adafruit PiTFT 2.2\" HAT Mini Kit - 320x240 2.2\" TFT - No Touch","handle":"adafruit-pitft-2-2-hat-mini-kit-320x240-2-2-tft-no-touch","description":"\u003cp\u003eThis product features a 2.2\" display with 320x240 16-bit color pixels. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top of your Model A+ or B+ and fits into our case quite nicely.\u003cbr\u003e\u003cbr\u003eIt's designed to plug directly onto the Raspberry Pi 2, Pi 3, Pi Zero or Raspberry Pi 1 Model A+ or B+.\u003c\/p\u003e \u003cp\u003eThis design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25. All other GPIO are unused and are available on a 25-pin long breakout line. Since there is a bit of space, there's 4 flat tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. \u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:48-05:00","vendor":"Adafruit","type":"Adafruit","tags":["Displays","Pi Hats","Plates"],"price":2490,"price_min":2490,"price_max":2490,"available":false,"price_varies":false,"compare_at_price":2495,"compare_at_price_min":2495,"compare_at_price_max":2495,"compare_at_price_varies":false,"variants":[{"id":29778536008,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"K148","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Adafruit PiTFT 2.2\" HAT Mini Kit - 320x240 2.2\" TFT - No Touch","public_title":null,"options":["Default Title"],"price":2490,"weight":0,"compare_at_price":2495,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-04.jpg?v=1486407048","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-00.jpg?v=1486407050","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-01.jpg?v=1486407051","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-05.jpg?v=1486407053","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-06.jpg?v=1486407055"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-04.jpg?v=1486407048","options":["Title"],"media":[{"alt":null,"id":320003407907,"position":1,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-04.jpg?v=1486407048"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-04.jpg?v=1486407048","width":1200},{"alt":null,"id":320003440675,"position":2,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-00.jpg?v=1486407050"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-00.jpg?v=1486407050","width":1200},{"alt":null,"id":320003473443,"position":3,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-01.jpg?v=1486407051"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-01.jpg?v=1486407051","width":1200},{"alt":null,"id":320003506211,"position":4,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-05.jpg?v=1486407053"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-05.jpg?v=1486407053","width":1200},{"alt":null,"id":320003538979,"position":5,"preview_image":{"aspect_ratio":1.333,"height":900,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-06.jpg?v=1486407055"},"aspect_ratio":1.333,"height":900,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2315-06.jpg?v=1486407055","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis product features a 2.2\" display with 320x240 16-bit color pixels. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top of your Model A+ or B+ and fits into our case quite nicely.\u003cbr\u003e\u003cbr\u003eIt's designed to plug directly onto the Raspberry Pi 2, Pi 3, Pi Zero or Raspberry Pi 1 Model A+ or B+.\u003c\/p\u003e \u003cp\u003eThis design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25. All other GPIO are unused and are available on a 25-pin long breakout line. Since there is a bit of space, there's 4 flat tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. \u003c\/p\u003e"}