Adafruit
Adafruit Industries is an open-source hardware company. The NYC based company designs and manufactures a number of electronics products, sells a wide variety of electronics components, tools, and accessories via its online storefront, and produces a number of learning resources, including written tutorials, introductory videos for beginners, and the longest running live video electronics show on the internet. 

Adafruit

Sort by:
Sold Out
Adafruit Liquid Flow Meter
{"id":8608174024,"title":"Adafruit Liquid Flow Meter","handle":"liquid-flow-meter","description":"\u003cp\u003e\u003cspan\u003eMeasure liquid\/water flow for your solar, computer cooling, or gardening project using this basic flow meter. This sensor sit in line with your water line, and uses a pinwheel sensor to measure how much liquid has moved through it. The pinwheel has a little magnet attached, and there's a hall effect magnetic sensor on the other side of the plastic tube that can measure how many spins the pinwheel has made through the plastic wall. This method allows the sensor to stay safe and dry.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe sensor comes with three wires. By counting the pulses from the output of the sensor, you can easily track fluid movement: each pulse is approximately 2.25 milliliters. Note this isn't a precision sensor, and the pulse rate does vary a bit depending on the flow rate, fluid pressure and sensor orientation. It will need careful calibration if better than 10% precision is required.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:49-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Components and Parts","Sensors"],"price":990,"price_min":990,"price_max":990,"available":false,"price_varies":false,"compare_at_price":995,"compare_at_price_min":995,"compare_at_price_max":995,"compare_at_price_varies":false,"variants":[{"id":29778536712,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"KBJ-N8W-A91","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Adafruit Liquid Flow Meter","public_title":null,"options":["Default Title"],"price":990,"weight":0,"compare_at_price":995,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"828"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/828-00.jpg?v=1486784729","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/828-01.jpg?v=1486784730","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/828-02.jpg?v=1486784731"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/828-00.jpg?v=1486784729","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eMeasure liquid\/water flow for your solar, computer cooling, or gardening project using this basic flow meter. This sensor sit in line with your water line, and uses a pinwheel sensor to measure how much liquid has moved through it. The pinwheel has a little magnet attached, and there's a hall effect magnetic sensor on the other side of the plastic tube that can measure how many spins the pinwheel has made through the plastic wall. This method allows the sensor to stay safe and dry.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe sensor comes with three wires. By counting the pulses from the output of the sensor, you can easily track fluid movement: each pulse is approximately 2.25 milliliters. Note this isn't a precision sensor, and the pulse rate does vary a bit depending on the flow rate, fluid pressure and sensor orientation. It will need careful calibration if better than 10% precision is required.\u003c\/span\u003e\u003c\/p\u003e"}
Adafruit Liquid Flow Meter

Adafruit Liquid Flow Meter

$9.90

Measure liquid/water flow for your solar, computer cooling, or gardening project using this basic flow meter. This sensor sit in line with your water line, and uses a pinwheel sensor to measure how much liquid has moved through it. The pinwheel has a little magnet attached, and there's a hall effect magnetic sensor on the other side of the plast...


More Info
Sale
Adafruit MCP3008 - 8-Channel 10-Bit ADC With SPI Interface
{"id":8608172040,"title":"Adafruit MCP3008 - 8-Channel 10-Bit ADC With SPI Interface","handle":"mcp3008-8-channel-10-bit-adc-with-spi-interface","description":"\u003cp\u003e\u003cspan\u003eNeed to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy to use, and uses SPI so only 4 pins are required. We chose this chip as a great accompaniment to the Raspberry Pi computer, because its fun to have analog inputs but the Pi does not have an ADC.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-01-30T19:22:00-05:00","created_at":"2017-01-30T19:22:45-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Components and Parts","Microcontroller"],"price":370,"price_min":370,"price_max":370,"available":true,"price_varies":false,"compare_at_price":375,"compare_at_price_min":375,"compare_at_price_max":375,"compare_at_price_varies":false,"variants":[{"id":29778534728,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"I5R-BNL-0RZ","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit MCP3008 - 8-Channel 10-Bit ADC With SPI Interface","public_title":null,"options":["Default Title"],"price":370,"weight":0,"compare_at_price":375,"inventory_quantity":49,"inventory_management":"shopify","inventory_policy":"deny","barcode":"856"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/856-01.jpg?v=1486785147","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/856-02.jpg?v=1486785148"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/856-01.jpg?v=1486785147","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eNeed to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy to use, and uses SPI so only 4 pins are required. We chose this chip as a great accompaniment to the Raspberry Pi computer, because its fun to have analog inputs but the Pi does not have an ADC.\u003c\/span\u003e\u003c\/p\u003e"}
Adafruit MCP3008 - 8-Channel 10-Bit ADC With SPI Interface

Adafruit MCP3008 - 8-Channel 10-Bit ADC With SPI Interface

$3.70

Need to add analog inputs? This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. It's super easy to use, and uses SPI so only 4 pins are required. We chose this chip as a great accompaniment to the Raspberry Pi computer, because its fun to have analog inputs but the Pi does not have an ADC.


More Info
Sale
Adafruit Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft
{"id":8861032392,"title":"Adafruit Stainless Medium Conductive Thread - 3 ply - 18 meter\/60 ft","handle":"adafruit-stainless-medium-conductive-thread-3-ply-18-meter-60-ft","description":"\u003cp\u003eThis conductive thread is thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll quickly agree its optimal for any wearables work. Check out the \u003ca href=\"Compatible%20-%20v3%20https:\/\/kjdelectronics.com\/products\/adafruit-flora-wearable-electronic-platform-arduino-compatible-v3\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFLORA\u003c\/a\u003e, the \u003ca href=\"https:\/\/kjdelectronics.com\/products\/adafruit-gemma-v2-miniature-wearable-electronic-platform\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGEMMA\u003c\/a\u003e, and the \u003ca href=\"https:\/\/kjdelectronics.com\/products\/adafruit-circuit-playground-developer-edition\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCircuit Playground\u003c\/a\u003e to complete all your wearable projects.\u003cbr\u003e\u003cbr\u003eThis thread is 3 ply, thicker than every day polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles. This may be sew-able by a sewing machine that can handle 'heavy' thread. Because it is strong and smooth, its ideal for any wearable\/e-textile project. It also has fairly low resistivity, 10 ohms per foot so you can use it to drive LEDs and other electronic components that use under ~100mA.\u003cbr\u003e\u003cbr\u003eBecause it is made of stainless steel fibers, it will not oxidize like silver does: your projects will not 'stop working' because of oxidation after a few months and its safe to wash. However, this thread is a little 'stiff', it feels a little like 'waxed thread' and is not ideal for making iPhone-compatible gloves.\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/m9O-T8oy7TU\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","published_at":"2017-03-09T16:16:00-05:00","created_at":"2017-03-06T21:01:33-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Components and Parts","Wearable"],"price":690,"price_min":690,"price_max":690,"available":true,"price_varies":false,"compare_at_price":695,"compare_at_price_min":695,"compare_at_price_max":695,"compare_at_price_varies":false,"variants":[{"id":31547913160,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MDM-N71-D6L","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Stainless Medium Conductive Thread - 3 ply - 18 meter\/60 ft","public_title":null,"options":["Default Title"],"price":690,"weight":0,"compare_at_price":695,"inventory_quantity":69,"inventory_management":"shopify","inventory_policy":"deny","barcode":"641"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/641-05.jpg?v=1489092732","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/641-04.jpg?v=1489092734","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/641-03.jpg?v=1489092735","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/641-01.jpg?v=1489092738"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/641-05.jpg?v=1489092732","options":["Title"],"content":"\u003cp\u003eThis conductive thread is thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll quickly agree its optimal for any wearables work. Check out the \u003ca href=\"Compatible%20-%20v3%20https:\/\/kjdelectronics.com\/products\/adafruit-flora-wearable-electronic-platform-arduino-compatible-v3\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFLORA\u003c\/a\u003e, the \u003ca href=\"https:\/\/kjdelectronics.com\/products\/adafruit-gemma-v2-miniature-wearable-electronic-platform\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGEMMA\u003c\/a\u003e, and the \u003ca href=\"https:\/\/kjdelectronics.com\/products\/adafruit-circuit-playground-developer-edition\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCircuit Playground\u003c\/a\u003e to complete all your wearable projects.\u003cbr\u003e\u003cbr\u003eThis thread is 3 ply, thicker than every day polyester or cotton thread but still thin enough to be sewn by hand in medium-eye needles. This may be sew-able by a sewing machine that can handle 'heavy' thread. Because it is strong and smooth, its ideal for any wearable\/e-textile project. It also has fairly low resistivity, 10 ohms per foot so you can use it to drive LEDs and other electronic components that use under ~100mA.\u003cbr\u003e\u003cbr\u003eBecause it is made of stainless steel fibers, it will not oxidize like silver does: your projects will not 'stop working' because of oxidation after a few months and its safe to wash. However, this thread is a little 'stiff', it feels a little like 'waxed thread' and is not ideal for making iPhone-compatible gloves.\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\n.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/m9O-T8oy7TU\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e"}
Adafruit Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft

Adafruit Stainless Medium Conductive Thread - 3 ply - 18 meter/60 ft

$6.90

This conductive thread is thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'll quickly agree its optimal for any wearables work. Check out the FLORA, the GEMMA, and the Circuit Playground to complete all your wearable projects.This thread is 3 ply, thicker than every day polyester or c...


More Info
Sale
Dual H-Bridge Motor Driver for DC or Stepper Motors
{"id":8608168136,"title":"Dual H-Bridge Motor Driver for DC or Stepper Motors","handle":"dual-h-bridge-motor-driver-for-dc-or-stepper-motors","description":"\u003cp\u003e\u003cspan\u003eRun four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. If you accidentally damaged the drivers in a shield, you can use one of these to replace it. Or you can breadboard something on your own.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEach chip contains two full H-bridges (four half H-bridges). That means you can drive four solenoids, two DC motors bi-directionally, or one stepper motor. Just make sure they're good for under 600 mA since that's the limit of this chip. They do handle a peak of 1.2A but that's just for a short amount of time. What we like most about this particular driver is that it \u003c\/span\u003ecomes with built in diodes internally so you don't have to worry about the inductive kick damaging your project or driver\u003c\/p\u003e","published_at":"2017-03-16T13:32:00-04:00","created_at":"2017-01-30T19:22:37-05:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Components and Parts","Driver"],"price":290,"price_min":290,"price_max":290,"available":true,"price_varies":false,"compare_at_price":295,"compare_at_price_min":295,"compare_at_price_max":295,"compare_at_price_varies":false,"variants":[{"id":29778528008,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5EL-VEJ-Z3D","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Dual H-Bridge Motor Driver for DC or Stepper Motors","public_title":null,"options":["Default Title"],"price":290,"weight":0,"compare_at_price":295,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":"807"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/807-01.jpg?v=1489179252","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/807-02.jpg?v=1489179254"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/807-01.jpg?v=1489179252","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eRun four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. If you accidentally damaged the drivers in a shield, you can use one of these to replace it. Or you can breadboard something on your own.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEach chip contains two full H-bridges (four half H-bridges). That means you can drive four solenoids, two DC motors bi-directionally, or one stepper motor. Just make sure they're good for under 600 mA since that's the limit of this chip. They do handle a peak of 1.2A but that's just for a short amount of time. What we like most about this particular driver is that it \u003c\/span\u003ecomes with built in diodes internally so you don't have to worry about the inductive kick damaging your project or driver\u003c\/p\u003e"}
Dual H-Bridge Motor Driver for DC or Stepper Motors

Dual H-Bridge Motor Driver for DC or Stepper Motors

$2.90

Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. If you accidentally damaged the drivers in a shield, you can use one of these to replace it. Or you can breadboard something on your own.Each chip contains two full H-bridges (four half H-bridges). That means you can drive four so...


More Info
Sale
Adafruit Feather 12-PIN AND 16-PIN Female Headers
{"id":9624082504,"title":"Adafruit Feather 12-PIN AND 16-PIN Female Headers","handle":"adafruit-feather-12-pin-and-16-pin-female-headers","description":"\u003cp\u003eThese two \u003cstrong\u003e\u003c\/strong\u003eFemale Stacking Headers alone are, well, lonely. But pair them with any of our \u003ca href=\"https:\/\/kjdelectronics.com\/collections\/adafruit\/feather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFeather\u003c\/a\u003e boards and you're in business.\u003c\/p\u003e\n\u003cp\u003eWhat do they do? They stack. Put the headers through your Feather and then you can not only plug them into a solderless breadboard, but you could attach circuitry on top as well\u003c\/p\u003e","published_at":"2017-05-17T18:01:53-04:00","created_at":"2017-05-17T18:15:06-04:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Components and Parts","Feather"],"price":120,"price_min":120,"price_max":120,"available":true,"price_varies":false,"compare_at_price":125,"compare_at_price_min":125,"compare_at_price_max":125,"compare_at_price_varies":false,"variants":[{"id":36274923784,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"H30-7MU-QCD","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Feather 12-PIN AND 16-PIN Female Headers","public_title":null,"options":["Default Title"],"price":120,"weight":0,"compare_at_price":125,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"2830"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2830-00.jpg?v=1495059309","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2830-01.jpg?v=1495059310","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2830-04.jpg?v=1495059311","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2830-05.jpg?v=1495059312","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2830-03.jpg?v=1495059314"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2830-00.jpg?v=1495059309","options":["Title"],"content":"\u003cp\u003eThese two \u003cstrong\u003e\u003c\/strong\u003eFemale Stacking Headers alone are, well, lonely. But pair them with any of our \u003ca href=\"https:\/\/kjdelectronics.com\/collections\/adafruit\/feather\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFeather\u003c\/a\u003e boards and you're in business.\u003c\/p\u003e\n\u003cp\u003eWhat do they do? They stack. Put the headers through your Feather and then you can not only plug them into a solderless breadboard, but you could attach circuitry on top as well\u003c\/p\u003e"}
Adafruit Feather 12-PIN AND 16-PIN Female Headers

Adafruit Feather 12-PIN AND 16-PIN Female Headers

$1.20

These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business. What do they do? They stack. Put the headers through your Feather and then you can not only plug them into a solderless breadboard, but you could attach circuitry on top as well


More Info
{"id":10243418056,"title":"Adafruit Breadboard-friendly SPDT Slide Switch","handle":"adafruit-breadboard-friendly-spdt-slide-switch","description":"\u003cp\u003e\u003cspan\u003eThese nice switches are perfect for use with breadboard and perfboard projects. They have 0.1\" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, but not so easy that they'll get flipped by accident. Work great as on\/off switches or selector switches, the middle pin is connected to \u003c\/span\u003e\u003cem\u003eeither\u003c\/em\u003e\u003cspan\u003e the left or right pin depending on which way the slider is pushed.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-07-21T11:32:32-04:00","created_at":"2017-07-21T11:38:28-04:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Components and Parts"],"price":95,"price_min":95,"price_max":95,"available":true,"price_varies":false,"compare_at_price":95,"compare_at_price_min":95,"compare_at_price_max":95,"compare_at_price_varies":false,"variants":[{"id":41318883848,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"ONH-R96-2CG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Breadboard-friendly SPDT Slide Switch","public_title":null,"options":["Default Title"],"price":95,"weight":0,"compare_at_price":95,"inventory_quantity":80,"inventory_management":"shopify","inventory_policy":"deny","barcode":"805"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/805-03.jpg?v=1500651510","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/805-04.jpg?v=1500651512","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/805-05.jpg?v=1500651514"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/805-03.jpg?v=1500651510","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eThese nice switches are perfect for use with breadboard and perfboard projects. They have 0.1\" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, but not so easy that they'll get flipped by accident. Work great as on\/off switches or selector switches, the middle pin is connected to \u003c\/span\u003e\u003cem\u003eeither\u003c\/em\u003e\u003cspan\u003e the left or right pin depending on which way the slider is pushed.\u003c\/span\u003e\u003c\/p\u003e"}
Adafruit Breadboard-friendly SPDT Slide Switch

Adafruit Breadboard-friendly SPDT Slide Switch

$0.95

These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, but not so easy that they'll get flipped by accident. Work great as on/off switches or selector switches, the middle pin is connected ...


More Info
{"id":10243430984,"title":"Adafruit GPIO Stacking Header for Pi A+\/B+\/Pi 2\/Pi 3","handle":"adafruit-gpio-stacking-header-for-pi-a-b-pi-2-pi-3","description":"\u003cp\u003eConnect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB\/Ethernet jacks. This header has extra long 10mm pins. With 10mm you can have a HAT that has extra pins to stack another HAT on top.\u003c\/p\u003e\n\u003cp\u003eYou'll get one header per order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: The Raspberry Pi Model A+, Raspberry Pi 2 and Raspberry Pi 3 are also compatible with this product.\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-07-21T11:40:05-04:00","created_at":"2017-07-21T11:42:54-04:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Components and Parts","Prototyping"],"price":250,"price_min":250,"price_max":250,"available":true,"price_varies":false,"compare_at_price":250,"compare_at_price_min":250,"compare_at_price_max":250,"compare_at_price_varies":false,"variants":[{"id":41319144136,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"MAV-AS3-IG0","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit GPIO Stacking Header for Pi A+\/B+\/Pi 2\/Pi 3","public_title":null,"options":["Default Title"],"price":250,"weight":0,"compare_at_price":250,"inventory_quantity":76,"inventory_management":"shopify","inventory_policy":"deny","barcode":"2223"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2223-00.jpg?v=1500651776","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2223-04.jpg?v=1500651778","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2223-01.jpg?v=1500651780","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2223-03.jpg?v=1500651781"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/2223-00.jpg?v=1500651776","options":["Title"],"content":"\u003cp\u003eConnect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB\/Ethernet jacks. This header has extra long 10mm pins. With 10mm you can have a HAT that has extra pins to stack another HAT on top.\u003c\/p\u003e\n\u003cp\u003eYou'll get one header per order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: The Raspberry Pi Model A+, Raspberry Pi 2 and Raspberry Pi 3 are also compatible with this product.\u003c\/strong\u003e\u003c\/p\u003e"}
Adafruit GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3

Adafruit GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3

$2.50

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra long 10mm pins. With 10mm you can have a HAT that has extra pins to stack another HAT on top. Yo...


More Info
Sold Out
Adafruit Thermoelectric Cooler Module with Heat Sink
{"id":10243464648,"title":"Adafruit Thermoelectric Cooler Module with Heat Sink","handle":"adafruit-thermoelectric-cooler-module-with-heat-sink","description":"\u003cp\u003e\u003cspan\u003eThe 12V Peltier module is mounted onto a 12V heatsink and fan assembly with thermal paste and an aluminum clamp. Simply connect to 12V 5A+ power supply and you will see frost appear on the aluminum plate within a minute. Just sitting on a desk it got down to -3.6°C when it was tested out.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eComes with the Peltier, heatsink, fan all assembled. You'll need a power supply to power it, we suggest our 12V 5A wall adapter. Temperature meter also not included.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-07-21T11:45:05-04:00","created_at":"2017-07-21T11:50:04-04:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Components and Parts"],"price":3490,"price_min":3490,"price_max":3490,"available":false,"price_varies":false,"compare_at_price":3495,"compare_at_price_min":3495,"compare_at_price_max":3495,"compare_at_price_varies":false,"variants":[{"id":41319594696,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"8RF-7EH-BOY","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Adafruit Thermoelectric Cooler Module with Heat Sink","public_title":null,"options":["Default Title"],"price":3490,"weight":0,"compare_at_price":3495,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"1335"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1335-06.jpg?v=1500652206","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1335-07.jpg?v=1500652207","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1335-09.jpg?v=1500652208","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1335-10.jpg?v=1500652209","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1335-05.jpg?v=1500652211","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1335-08.jpg?v=1500652212"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/1335-06.jpg?v=1500652206","options":["Title"],"content":"\u003cp\u003e\u003cspan\u003eThe 12V Peltier module is mounted onto a 12V heatsink and fan assembly with thermal paste and an aluminum clamp. Simply connect to 12V 5A+ power supply and you will see frost appear on the aluminum plate within a minute. Just sitting on a desk it got down to -3.6°C when it was tested out.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eComes with the Peltier, heatsink, fan all assembled. You'll need a power supply to power it, we suggest our 12V 5A wall adapter. Temperature meter also not included.\u003c\/span\u003e\u003c\/p\u003e"}
Adafruit Thermoelectric Cooler Module with Heat Sink

Adafruit Thermoelectric Cooler Module with Heat Sink

$34.90

The 12V Peltier module is mounted onto a 12V heatsink and fan assembly with thermal paste and an aluminum clamp. Simply connect to 12V 5A+ power supply and you will see frost appear on the aluminum plate within a minute. Just sitting on a desk it got down to -3.6°C when it was tested out.Comes with the Peltier, heatsink, fan all assembled. You'l...


More Info
Sale
Adafruit Antennas GPS Antenna 3-5V 28dB 5 meter SMA
{"id":10243650056,"title":"Adafruit Antennas GPS Antenna 3-5V 28dB 5 meter SMA","handle":"adafruit-antennas-gps-antenna-3-5v-28db-5-meter-sma","description":"\u003cp\u003eGive your \u003ca href=\"https:\/\/kjdelectronics.com\/collections\/adafruit\/gps\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUltimate GPS\u003c\/a\u003e a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truck (or any other steel structure). Comes with a standard SMA connector on the end.\u003cstrong\u003e GPS not included.\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-07-21T12:15:40-04:00","created_at":"2017-07-21T12:20:40-04:00","vendor":"kjdElectronics","type":"Adafruit","tags":["Components and Parts","GPS","Wireless"],"price":1290,"price_min":1290,"price_max":1290,"available":true,"price_varies":false,"compare_at_price":1295,"compare_at_price_min":1295,"compare_at_price_max":1295,"compare_at_price_varies":false,"variants":[{"id":41321061000,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JXP-D94-OLX","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Adafruit Antennas GPS Antenna 3-5V 28dB 5 meter SMA","public_title":null,"options":["Default Title"],"price":1290,"weight":0,"compare_at_price":1295,"inventory_quantity":95,"inventory_management":"shopify","inventory_policy":"deny","barcode":"960"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/960-04.jpg?v=1500654042","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/960-02.jpg?v=1500654043","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/960-03.jpg?v=1500654044","\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/960-05.jpg?v=1500654045"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1749\/9663\/products\/960-04.jpg?v=1500654042","options":["Title"],"content":"\u003cp\u003eGive your \u003ca href=\"https:\/\/kjdelectronics.com\/collections\/adafruit\/gps\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUltimate GPS\u003c\/a\u003e a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truck (or any other steel structure). Comes with a standard SMA connector on the end.\u003cstrong\u003e GPS not included.\u003c\/strong\u003e\u003c\/p\u003e"}
Adafruit Antennas GPS Antenna 3-5V 28dB 5 meter SMA

Adafruit Antennas GPS Antenna 3-5V 28dB 5 meter SMA

$12.90

Give your Ultimate GPS a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truck (or any other steel structure). Comes with a standa...


More Info